From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
suraj.kandpal@intel.com
Subject: Re: [PATCH 11/15] drm/i915/display: Refactor enable_joiner_pipes
Date: Thu, 19 Sep 2024 21:02:34 +0300 [thread overview]
Message-ID: <ZuxnOjflMkxPrK17@intel.com> (raw)
In-Reply-To: <20240918144343.2876184-12-ankit.k.nautiyal@intel.com>
On Wed, Sep 18, 2024 at 08:13:39PM +0530, Ankit Nautiyal wrote:
> Pass the current pipe into enabled_joiner_pipes(), and let it figure out
> the proper bitmasks for us.
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 58 +++++++++++++-------
> 1 file changed, 39 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 1ce334f3a3ae..65119c26ec88 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3717,7 +3717,19 @@ static void enabled_ultrajoiner_pipes(struct drm_i915_private *i915,
> }
> }
>
> -static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> +static enum pipe get_joiner_primary_pipe(enum pipe pipe, u8 primary_pipes, u8 secondary_pipes)
> +{
> + if ((secondary_pipes & BIT(pipe)) == 0)
> + return pipe;
> +
> + /* ignore everything above our pipe */
> + primary_pipes &= ~GENMASK(7, pipe);
> +
> + /* highest remaining bit should be our primary pipe */
> + return fls(primary_pipes) - 1;
I think this could now be simplified to something like:
{
primary_pipes &= GENMASK(pipe, 0);
return primary_pipes ? BIT(fls(primary_pipes) - 1) : 0;
}
And returning a bitmask like that would perhaps be easier
for enabled_joiner_pipes() to handle.
> +}
> +
> +static void enabled_joiner_pipes(struct drm_i915_private *dev_priv, enum pipe pipe,
> u8 *primary_pipes, u8 *secondary_pipes)
> {
> struct intel_display *display = to_intel_display(&dev_priv->drm);
> @@ -3782,10 +3794,30 @@ static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> expected_ultrajoiner_secondary_pipes(primary_ultrajoiner_pipes),
> secondary_ultrajoiner_pipes);
>
> - *primary_pipes = primary_uncompressed_joiner_pipes | primary_bigjoiner_pipes |
> - primary_ultrajoiner_pipes;
> - *secondary_pipes = secondary_uncompressed_joiner_pipes | secondary_bigjoiner_pipes |
> - secondary_ultrajoiner_pipes;
> + *primary_pipes = 0;
> + *secondary_pipes = 0;
> +
> + if (ultrajoiner_pipes & BIT(pipe)) {
> + *primary_pipes = BIT(get_joiner_primary_pipe(pipe, primary_ultrajoiner_pipes,
> + secondary_ultrajoiner_pipes));
> + *secondary_pipes = secondary_ultrajoiner_pipes &
> + expected_ultrajoiner_secondary_pipes(primary_ultrajoiner_pipes);
> + return;
> + }
> +
> + if (uncompressed_joiner_pipes & BIT(pipe)) {
> + *primary_pipes = BIT(get_joiner_primary_pipe(pipe,
> + primary_uncompressed_joiner_pipes,
> + secondary_uncompressed_joiner_pipes));
> + *secondary_pipes =
> + secondary_uncompressed_joiner_pipes &
> + expected_uncompjoiner_secondary_pipes(primary_uncompressed_joiner_pipes);
> + } else if (bigjoiner_pipes & BIT(pipe)) {
> + *primary_pipes = BIT(get_joiner_primary_pipe(pipe, primary_bigjoiner_pipes,
> + secondary_bigjoiner_pipes));
> + *secondary_pipes = secondary_bigjoiner_pipes &
> + expected_bigjoiner_secondary_pipes(primary_bigjoiner_pipes);
> + }
>
> /* Joiner pipes should always be consecutive primary and secondary */
> drm_WARN(display->drm, *secondary_pipes != *primary_pipes << 1,
This would now have to be something like:
drm_WARN(expected_*_secondary_pipes(*primary_pipes) != *secondary_pipes);
(wich I suppose manes it has to be done for each joiner type
separately.
> @@ -3793,18 +3825,6 @@ static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> *primary_pipes, *secondary_pipes);
> }
>
> -static enum pipe get_joiner_primary_pipe(enum pipe pipe, u8 primary_pipes, u8 secondary_pipes)
> -{
> - if ((secondary_pipes & BIT(pipe)) == 0)
> - return pipe;
> -
> - /* ignore everything above our pipe */
> - primary_pipes &= ~GENMASK(7, pipe);
> -
> - /* highest remaining bit should be our primary pipe */
> - return fls(primary_pipes) - 1;
> -}
> -
> static u8 get_joiner_secondary_pipes(enum pipe pipe, u8 primary_pipes, u8 secondary_pipes)
> {
> enum pipe primary_pipe, next_primary_pipe;
I think this guy could be nuked, and callers should just use the
bitmasks returned by enabled_joiner_pipes directly.
> @@ -3893,7 +3913,7 @@ static u8 hsw_enabled_transcoders(struct intel_crtc *crtc)
> enabled_transcoders |= BIT(cpu_transcoder);
>
> /* joiner secondary -> consider the primary pipe's transcoder as well */
> - enabled_joiner_pipes(dev_priv, &primary_pipes, &secondary_pipes);
> + enabled_joiner_pipes(dev_priv, crtc->pipe, &primary_pipes, &secondary_pipes);
> if (secondary_pipes & BIT(crtc->pipe)) {
> cpu_transcoder = (enum transcoder)
> get_joiner_primary_pipe(crtc->pipe, primary_pipes, secondary_pipes);
> @@ -4030,7 +4050,7 @@ static void intel_joiner_get_config(struct intel_crtc_state *crtc_state)
> u8 primary_pipes, secondary_pipes;
> enum pipe pipe = crtc->pipe;
>
> - enabled_joiner_pipes(i915, &primary_pipes, &secondary_pipes);
> + enabled_joiner_pipes(i915, pipe, &primary_pipes, &secondary_pipes);
>
> if (((primary_pipes | secondary_pipes) & BIT(pipe)) == 0)
> return;
> --
> 2.45.2
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2024-09-19 18:02 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 14:43 [PATCH 00/15] Ultrajoiner basic functionality series Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 01/15] drm/i915: Add some essential functionality for joiners Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 02/15] drm/i915/display: Enhance iterators for modeset en/disable Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 03/15] drm/i915/display_debugfs: Allow force joiner only if supported Ankit Nautiyal
2024-09-19 15:04 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 04/15] drm/i915/display: Modify debugfs for joiner to force n pipes Ankit Nautiyal
2024-09-19 15:07 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 05/15] drm/i915/dp: Add helper to compute num pipes required Ankit Nautiyal
2024-09-19 15:12 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 06/15] drm/i915/display: Add debugfs support to avoid joiner Ankit Nautiyal
2024-09-19 15:15 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 07/15] drm/i915: Split current joiner hw state readout Ankit Nautiyal
2024-09-19 15:18 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 08/15] drm/i915: Add bigjoiner and uncompressed joiner hw readout sanity checks Ankit Nautiyal
2024-09-19 15:22 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 09/15] drm/i915/display: Add macro HAS_ULTRAJOINER() Ankit Nautiyal
2024-09-19 15:24 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 10/15] drm/i915: Implement hw state readout and checks for ultrajoiner Ankit Nautiyal
2024-09-19 15:33 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 11/15] drm/i915/display: Refactor enable_joiner_pipes Ankit Nautiyal
2024-09-19 18:02 ` Ville Syrjälä [this message]
2024-09-18 14:43 ` [PATCH 12/15] drm/i915/display/vdsc: Add ultrajoiner support with DSC Ankit Nautiyal
2024-09-19 18:06 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 13/15] drm/i915: Compute config and mode valid changes for ultrajoiner Ankit Nautiyal
2024-09-19 18:30 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 14/15] drm/i915/display: Consider ultrajoiner for computing maxdotclock Ankit Nautiyal
2024-09-19 18:42 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 15/15] drm/i915/intel_dp: Add support for forcing ultrajoiner Ankit Nautiyal
2024-09-19 18:45 ` Ville Syrjälä
2024-09-18 15:22 ` ✗ Fi.CI.CHECKPATCH: warning for Ultrajoiner basic functionality series (rev9) Patchwork
2024-09-18 15:22 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-09-18 15:30 ` ✓ Fi.CI.BAT: success " Patchwork
2024-09-19 5:01 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZuxnOjflMkxPrK17@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox