Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Souza, Jose" <jose.souza@intel.com>
To: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>,
	"Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Subject: Re: [PATCH v2 1/3] drm/i915/bdw+: Move misc display IRQ handling to it own function
Date: Fri, 12 Apr 2019 22:45:16 +0000	[thread overview]
Message-ID: <a79c9f1cbf0605bcb755a046a2dcdbbf8a64535f.camel@intel.com> (raw)
In-Reply-To: <20190412224013.GD19065@intel.com>


[-- Attachment #1.1: Type: text/plain, Size: 3358 bytes --]

On Fri, 2019-04-12 at 15:40 -0700, Rodrigo Vivi wrote:
> On Fri, Apr 12, 2019 at 03:29:07PM -0700, José Roberto de Souza
> wrote:
> > Just moving it to reduce the tabs and avoid break code lines.
> > No behavior changes intended here.
> 
> this function is indeed big and deserves a split.
> I wonder why haven't you moved the entire de_misc block to a
> separated
> function instead only the middle of the handling...
> 
> i mean, including reg read above and error message below.

It was reading and writing GEN8_DE_MISC_IIR inside of
gen8_de_misc_irq_handler() but to keep consistent with the other
handlers Dhinakaran suggested this change.

> 
> > v2:
> > - Reading misc display IRQ outside of gen8_de_misc_irq_handler() as
> > other irq handlers (Dhinakaran)
> > 
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
> > Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_irq.c | 45 ++++++++++++++++++-----------
> > ----
> >  1 file changed, 25 insertions(+), 20 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c
> > b/drivers/gpu/drm/i915/i915_irq.c
> > index d934545445e1..820d89300454 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -2740,6 +2740,28 @@ static u32 gen8_de_port_aux_mask(struct
> > drm_i915_private *dev_priv)
> >  	return mask;
> >  }
> >  
> > +static void
> > +gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32
> > iir)
> > +{
> > +	bool found = false;
> > +
> > +	if (iir & GEN8_DE_MISC_GSE) {
> > +		intel_opregion_asle_intr(dev_priv);
> > +		found = true;
> > +	}
> > +
> > +	if (iir & GEN8_DE_EDP_PSR) {
> > +		u32 psr_iir = I915_READ(EDP_PSR_IIR);
> > +
> > +		intel_psr_irq_handler(dev_priv, psr_iir);
> > +		I915_WRITE(EDP_PSR_IIR, psr_iir);
> > +		found = true;
> > +	}
> > +
> > +	if (!found)
> > +		DRM_ERROR("Unexpected DE Misc interrupt\n");
> > +}
> > +
> >  static irqreturn_t
> >  gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32
> > master_ctl)
> >  {
> > @@ -2750,29 +2772,12 @@ gen8_de_irq_handler(struct drm_i915_private
> > *dev_priv, u32 master_ctl)
> >  	if (master_ctl & GEN8_DE_MISC_IRQ) {
> >  		iir = I915_READ(GEN8_DE_MISC_IIR);
> >  		if (iir) {
> > -			bool found = false;
> > -
> >  			I915_WRITE(GEN8_DE_MISC_IIR, iir);
> >  			ret = IRQ_HANDLED;
> > -
> > -			if (iir & GEN8_DE_MISC_GSE) {
> > -				intel_opregion_asle_intr(dev_priv);
> > -				found = true;
> > -			}
> > -
> > -			if (iir & GEN8_DE_EDP_PSR) {
> > -				u32 psr_iir = I915_READ(EDP_PSR_IIR);
> > -
> > -				intel_psr_irq_handler(dev_priv,
> > psr_iir);
> > -				I915_WRITE(EDP_PSR_IIR, psr_iir);
> > -				found = true;
> > -			}
> > -
> > -			if (!found)
> > -				DRM_ERROR("Unexpected DE Misc
> > interrupt\n");
> > -		}
> > -		else
> > +			gen8_de_misc_irq_handler(dev_priv, iir);
> > +		} else {
> >  			DRM_ERROR("The master control interrupt lied
> > (DE MISC)!\n");
> > +		}
> >  	}
> >  
> >  	if (INTEL_GEN(dev_priv) >= 11 && (master_ctl &
> > GEN11_DE_HPD_IRQ)) {
> > -- 
> > 2.21.0
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-04-12 22:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-12 22:29 [PATCH v2 1/3] drm/i915/bdw+: Move misc display IRQ handling to it own function José Roberto de Souza
2019-04-12 22:29 ` [PATCH v2 2/3] drm/i915/psr: Remove partial PSR support on multiple transcoders José Roberto de Souza
2019-04-12 22:42   ` Rodrigo Vivi
2019-04-12 22:29 ` [PATCH v2 3/3] drm/i915: Make PSR registers relative to transcoders José Roberto de Souza
2019-04-12 22:45   ` Rodrigo Vivi
2019-04-12 22:40 ` [PATCH v2 1/3] drm/i915/bdw+: Move misc display IRQ handling to it own function Rodrigo Vivi
2019-04-12 22:45   ` Souza, Jose [this message]
2019-04-12 22:53     ` Rodrigo Vivi
2019-04-12 23:24 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [v2,1/3] " Patchwork
2019-04-12 23:26 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-04-12 23:53 ` ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a79c9f1cbf0605bcb755a046a2dcdbbf8a64535f.camel@intel.com \
    --to=jose.souza@intel.com \
    --cc=dhinakaran.pandiyan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox