* [Intel-gfx] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests @ 2023-07-17 18:42 Vinay Belgaumkar 2023-07-18 1:50 ` [Intel-gfx] [igt-dev] " Dixit, Ashutosh 0 siblings, 1 reply; 6+ messages in thread From: Vinay Belgaumkar @ 2023-07-17 18:42 UTC (permalink / raw) To: intel-gfx, igt-dev Some subtests seem to be failing in CI, use igt_assert_(lt/eq) which print the values being compared and some additional debug as well. v2: Print GT as well (Ashutosh) Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> --- tests/i915/i915_pm_freq_api.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c index 522abee35..a7bbd4896 100644 --- a/tests/i915/i915_pm_freq_api.c +++ b/tests/i915/i915_pm_freq_api.c @@ -55,6 +55,7 @@ static void test_freq_basic_api(int dirfd, int gt) rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ); rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ); rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ); + igt_debug("GT: %d, RPn: %d, RPe: %d, RP0: %d", gt, rpn, rpe, rp0); /* * Negative bound tests @@ -90,21 +91,18 @@ static void test_reset(int i915, int dirfd, int gt, int count) int fd; for (int i = 0; i < count; i++) { - igt_assert_f(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0, - "Failed after %d good cycles\n", i); - igt_assert_f(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0, - "Failed after %d good cycles\n", i); + igt_debug("Running cycle: %d", i); + igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); + igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); usleep(ACT_FREQ_LATENCY_US); - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, - "Failed after %d good cycles\n", i); + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); /* Manually trigger a GT reset */ fd = igt_debugfs_gt_open(i915, gt, "reset", O_WRONLY); igt_require(fd >= 0); igt_ignore_warn(write(fd, "1\n", 2)); - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, - "Failed after %d good cycles\n", i); + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); } close(fd); } @@ -116,13 +114,13 @@ static void test_suspend(int i915, int dirfd, int gt) igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); usleep(ACT_FREQ_LATENCY_US); - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); /* Manually trigger a suspend */ igt_system_suspend_autoresume(SUSPEND_STATE_S3, SUSPEND_TEST_NONE); - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); } int i915 = -1; -- 2.38.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [igt-dev] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests 2023-07-17 18:42 [Intel-gfx] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests Vinay Belgaumkar @ 2023-07-18 1:50 ` Dixit, Ashutosh 2023-07-18 4:19 ` Belgaumkar, Vinay 0 siblings, 1 reply; 6+ messages in thread From: Dixit, Ashutosh @ 2023-07-18 1:50 UTC (permalink / raw) To: Vinay Belgaumkar; +Cc: igt-dev, intel-gfx On Mon, 17 Jul 2023 11:42:13 -0700, Vinay Belgaumkar wrote: > > Some subtests seem to be failing in CI, use igt_assert_(lt/eq) which > print the values being compared and some additional debug as well. > > v2: Print GT as well (Ashutosh) > > Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> > --- > tests/i915/i915_pm_freq_api.c | 18 ++++++++---------- > 1 file changed, 8 insertions(+), 10 deletions(-) > > diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c > index 522abee35..a7bbd4896 100644 > --- a/tests/i915/i915_pm_freq_api.c > +++ b/tests/i915/i915_pm_freq_api.c > @@ -55,6 +55,7 @@ static void test_freq_basic_api(int dirfd, int gt) > rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ); > rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ); > rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ); > + igt_debug("GT: %d, RPn: %d, RPe: %d, RP0: %d", gt, rpn, rpe, rp0); > > /* > * Negative bound tests > @@ -90,21 +91,18 @@ static void test_reset(int i915, int dirfd, int gt, int count) > int fd; > > for (int i = 0; i < count; i++) { > - igt_assert_f(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0, > - "Failed after %d good cycles\n", i); > - igt_assert_f(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0, > - "Failed after %d good cycles\n", i); > + igt_debug("Running cycle: %d", i); > + igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); > + igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); I am R-b'ing this but stuff like this should be using igt_assert_lt() according to the commit message? This _lt stuff has to be fixed all over the file, not just this patch, if it brings any value (again according to the commit message). Let me know if you want to fix this now or in a later patch. I'll wait before merging. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> > usleep(ACT_FREQ_LATENCY_US); > - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, > - "Failed after %d good cycles\n", i); > + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > > /* Manually trigger a GT reset */ > fd = igt_debugfs_gt_open(i915, gt, "reset", O_WRONLY); > igt_require(fd >= 0); > igt_ignore_warn(write(fd, "1\n", 2)); > > - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, > - "Failed after %d good cycles\n", i); > + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > } > close(fd); > } > @@ -116,13 +114,13 @@ static void test_suspend(int i915, int dirfd, int gt) > igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); > igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); > usleep(ACT_FREQ_LATENCY_US); > - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); > + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > > /* Manually trigger a suspend */ > igt_system_suspend_autoresume(SUSPEND_STATE_S3, > SUSPEND_TEST_NONE); > > - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); > + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > } > > int i915 = -1; > -- > 2.38.1 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [igt-dev] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests 2023-07-18 1:50 ` [Intel-gfx] [igt-dev] " Dixit, Ashutosh @ 2023-07-18 4:19 ` Belgaumkar, Vinay 2023-07-18 4:26 ` Dixit, Ashutosh 0 siblings, 1 reply; 6+ messages in thread From: Belgaumkar, Vinay @ 2023-07-18 4:19 UTC (permalink / raw) To: Dixit, Ashutosh; +Cc: igt-dev, intel-gfx On 7/17/2023 6:50 PM, Dixit, Ashutosh wrote: > On Mon, 17 Jul 2023 11:42:13 -0700, Vinay Belgaumkar wrote: >> Some subtests seem to be failing in CI, use igt_assert_(lt/eq) which >> print the values being compared and some additional debug as well. >> >> v2: Print GT as well (Ashutosh) >> >> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> >> --- >> tests/i915/i915_pm_freq_api.c | 18 ++++++++---------- >> 1 file changed, 8 insertions(+), 10 deletions(-) >> >> diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c >> index 522abee35..a7bbd4896 100644 >> --- a/tests/i915/i915_pm_freq_api.c >> +++ b/tests/i915/i915_pm_freq_api.c >> @@ -55,6 +55,7 @@ static void test_freq_basic_api(int dirfd, int gt) >> rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ); >> rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ); >> rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ); >> + igt_debug("GT: %d, RPn: %d, RPe: %d, RP0: %d", gt, rpn, rpe, rp0); >> >> /* >> * Negative bound tests >> @@ -90,21 +91,18 @@ static void test_reset(int i915, int dirfd, int gt, int count) >> int fd; >> >> for (int i = 0; i < count; i++) { >> - igt_assert_f(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0, >> - "Failed after %d good cycles\n", i); >> - igt_assert_f(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0, >> - "Failed after %d good cycles\n", i); >> + igt_debug("Running cycle: %d", i); >> + igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); >> + igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); > I am R-b'ing this but stuff like this should be using igt_assert_lt() > according to the commit message? > > This _lt stuff has to be fixed all over the file, not just this patch, if > it brings any value (again according to the commit message). > > Let me know if you want to fix this now or in a later patch. I'll wait > before merging. Yup, I will send out another version with the corrected commit message. Thanks, Vinay. > > Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> > >> usleep(ACT_FREQ_LATENCY_US); >> - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, >> - "Failed after %d good cycles\n", i); >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >> >> /* Manually trigger a GT reset */ >> fd = igt_debugfs_gt_open(i915, gt, "reset", O_WRONLY); >> igt_require(fd >= 0); >> igt_ignore_warn(write(fd, "1\n", 2)); >> >> - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, >> - "Failed after %d good cycles\n", i); >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >> } >> close(fd); >> } >> @@ -116,13 +114,13 @@ static void test_suspend(int i915, int dirfd, int gt) >> igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); >> igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); >> usleep(ACT_FREQ_LATENCY_US); >> - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >> >> /* Manually trigger a suspend */ >> igt_system_suspend_autoresume(SUSPEND_STATE_S3, >> SUSPEND_TEST_NONE); >> >> - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >> } >> >> int i915 = -1; >> -- >> 2.38.1 >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [igt-dev] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests 2023-07-18 4:19 ` Belgaumkar, Vinay @ 2023-07-18 4:26 ` Dixit, Ashutosh 2023-07-18 18:00 ` Belgaumkar, Vinay 0 siblings, 1 reply; 6+ messages in thread From: Dixit, Ashutosh @ 2023-07-18 4:26 UTC (permalink / raw) To: Belgaumkar, Vinay; +Cc: igt-dev, intel-gfx On Mon, 17 Jul 2023 21:19:13 -0700, Belgaumkar, Vinay wrote: > > > On 7/17/2023 6:50 PM, Dixit, Ashutosh wrote: > > On Mon, 17 Jul 2023 11:42:13 -0700, Vinay Belgaumkar wrote: > >> Some subtests seem to be failing in CI, use igt_assert_(lt/eq) which > >> print the values being compared and some additional debug as well. > >> > >> v2: Print GT as well (Ashutosh) > >> > >> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> > >> --- > >> tests/i915/i915_pm_freq_api.c | 18 ++++++++---------- > >> 1 file changed, 8 insertions(+), 10 deletions(-) > >> > >> diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c > >> index 522abee35..a7bbd4896 100644 > >> --- a/tests/i915/i915_pm_freq_api.c > >> +++ b/tests/i915/i915_pm_freq_api.c > >> @@ -55,6 +55,7 @@ static void test_freq_basic_api(int dirfd, int gt) > >> rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ); > >> rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ); > >> rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ); > >> + igt_debug("GT: %d, RPn: %d, RPe: %d, RP0: %d", gt, rpn, rpe, rp0); > >> > >> /* > >> * Negative bound tests > >> @@ -90,21 +91,18 @@ static void test_reset(int i915, int dirfd, int gt, int count) > >> int fd; > >> > >> for (int i = 0; i < count; i++) { > >> - igt_assert_f(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0, > >> - "Failed after %d good cycles\n", i); > >> - igt_assert_f(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0, > >> - "Failed after %d good cycles\n", i); > >> + igt_debug("Running cycle: %d", i); > >> + igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); > >> + igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); > > I am R-b'ing this but stuff like this should be using igt_assert_lt() > > according to the commit message? > > > > This _lt stuff has to be fixed all over the file, not just this patch, if > > it brings any value (again according to the commit message). > > > > Let me know if you want to fix this now or in a later patch. I'll wait > > before merging. > > Yup, I will send out another version with the corrected commit message. Hmm, I thought the code needs to be fixed not the commit message :) > > Thanks, > > Vinay. > > > > > Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> > > > >> usleep(ACT_FREQ_LATENCY_US); > >> - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, > >> - "Failed after %d good cycles\n", i); > >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > >> > >> /* Manually trigger a GT reset */ > >> fd = igt_debugfs_gt_open(i915, gt, "reset", O_WRONLY); > >> igt_require(fd >= 0); > >> igt_ignore_warn(write(fd, "1\n", 2)); > >> > >> - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, > >> - "Failed after %d good cycles\n", i); > >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > >> } > >> close(fd); > >> } > >> @@ -116,13 +114,13 @@ static void test_suspend(int i915, int dirfd, int gt) > >> igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); > >> igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); > >> usleep(ACT_FREQ_LATENCY_US); > >> - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); > >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > >> > >> /* Manually trigger a suspend */ > >> igt_system_suspend_autoresume(SUSPEND_STATE_S3, > >> SUSPEND_TEST_NONE); > >> > >> - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); > >> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); > >> } > >> > >> int i915 = -1; > >> -- > >> 2.38.1 > >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [igt-dev] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests 2023-07-18 4:26 ` Dixit, Ashutosh @ 2023-07-18 18:00 ` Belgaumkar, Vinay 2023-07-18 18:16 ` Dixit, Ashutosh 0 siblings, 1 reply; 6+ messages in thread From: Belgaumkar, Vinay @ 2023-07-18 18:00 UTC (permalink / raw) To: Dixit, Ashutosh; +Cc: igt-dev, intel-gfx On 7/17/2023 9:26 PM, Dixit, Ashutosh wrote: > On Mon, 17 Jul 2023 21:19:13 -0700, Belgaumkar, Vinay wrote: >> >> On 7/17/2023 6:50 PM, Dixit, Ashutosh wrote: >>> On Mon, 17 Jul 2023 11:42:13 -0700, Vinay Belgaumkar wrote: >>>> Some subtests seem to be failing in CI, use igt_assert_(lt/eq) which >>>> print the values being compared and some additional debug as well. >>>> >>>> v2: Print GT as well (Ashutosh) >>>> >>>> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> >>>> --- >>>> tests/i915/i915_pm_freq_api.c | 18 ++++++++---------- >>>> 1 file changed, 8 insertions(+), 10 deletions(-) >>>> >>>> diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c >>>> index 522abee35..a7bbd4896 100644 >>>> --- a/tests/i915/i915_pm_freq_api.c >>>> +++ b/tests/i915/i915_pm_freq_api.c >>>> @@ -55,6 +55,7 @@ static void test_freq_basic_api(int dirfd, int gt) >>>> rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ); >>>> rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ); >>>> rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ); >>>> + igt_debug("GT: %d, RPn: %d, RPe: %d, RP0: %d", gt, rpn, rpe, rp0); >>>> >>>> /* >>>> * Negative bound tests >>>> @@ -90,21 +91,18 @@ static void test_reset(int i915, int dirfd, int gt, int count) >>>> int fd; >>>> >>>> for (int i = 0; i < count; i++) { >>>> - igt_assert_f(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0, >>>> - "Failed after %d good cycles\n", i); >>>> - igt_assert_f(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0, >>>> - "Failed after %d good cycles\n", i); >>>> + igt_debug("Running cycle: %d", i); >>>> + igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); >>>> + igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); >>> I am R-b'ing this but stuff like this should be using igt_assert_lt() >>> according to the commit message? >>> >>> This _lt stuff has to be fixed all over the file, not just this patch, if >>> it brings any value (again according to the commit message). >>> >>> Let me know if you want to fix this now or in a later patch. I'll wait >>> before merging. >> Yup, I will send out another version with the corrected commit message. > Hmm, I thought the code needs to be fixed not the commit message :) Ok, I meant this specific patch will address just the area where we check for the requested frequency. I will change the remaining in a separate patch. Thanks, Vinay. > >> Thanks, >> >> Vinay. >> >>> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> >>> >>>> usleep(ACT_FREQ_LATENCY_US); >>>> - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, >>>> - "Failed after %d good cycles\n", i); >>>> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >>>> >>>> /* Manually trigger a GT reset */ >>>> fd = igt_debugfs_gt_open(i915, gt, "reset", O_WRONLY); >>>> igt_require(fd >= 0); >>>> igt_ignore_warn(write(fd, "1\n", 2)); >>>> >>>> - igt_assert_f(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn, >>>> - "Failed after %d good cycles\n", i); >>>> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >>>> } >>>> close(fd); >>>> } >>>> @@ -116,13 +114,13 @@ static void test_suspend(int i915, int dirfd, int gt) >>>> igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); >>>> igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); >>>> usleep(ACT_FREQ_LATENCY_US); >>>> - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); >>>> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >>>> >>>> /* Manually trigger a suspend */ >>>> igt_system_suspend_autoresume(SUSPEND_STATE_S3, >>>> SUSPEND_TEST_NONE); >>>> >>>> - igt_assert(get_freq(dirfd, RPS_CUR_FREQ_MHZ) == rpn); >>>> + igt_assert_eq(get_freq(dirfd, RPS_CUR_FREQ_MHZ), rpn); >>>> } >>>> >>>> int i915 = -1; >>>> -- >>>> 2.38.1 >>>> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [igt-dev] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests 2023-07-18 18:00 ` Belgaumkar, Vinay @ 2023-07-18 18:16 ` Dixit, Ashutosh 0 siblings, 0 replies; 6+ messages in thread From: Dixit, Ashutosh @ 2023-07-18 18:16 UTC (permalink / raw) To: Belgaumkar, Vinay; +Cc: igt-dev, intel-gfx On Tue, 18 Jul 2023 11:00:36 -0700, Belgaumkar, Vinay wrote: > > > On 7/17/2023 9:26 PM, Dixit, Ashutosh wrote: > > On Mon, 17 Jul 2023 21:19:13 -0700, Belgaumkar, Vinay wrote: > >> > >> On 7/17/2023 6:50 PM, Dixit, Ashutosh wrote: > >>> On Mon, 17 Jul 2023 11:42:13 -0700, Vinay Belgaumkar wrote: > >>>> Some subtests seem to be failing in CI, use igt_assert_(lt/eq) which > >>>> print the values being compared and some additional debug as well. > >>>> > >>>> v2: Print GT as well (Ashutosh) > >>>> > >>>> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> > >>>> --- > >>>> tests/i915/i915_pm_freq_api.c | 18 ++++++++---------- > >>>> 1 file changed, 8 insertions(+), 10 deletions(-) > >>>> > >>>> diff --git a/tests/i915/i915_pm_freq_api.c b/tests/i915/i915_pm_freq_api.c > >>>> index 522abee35..a7bbd4896 100644 > >>>> --- a/tests/i915/i915_pm_freq_api.c > >>>> +++ b/tests/i915/i915_pm_freq_api.c > >>>> @@ -55,6 +55,7 @@ static void test_freq_basic_api(int dirfd, int gt) > >>>> rpn = get_freq(dirfd, RPS_RPn_FREQ_MHZ); > >>>> rp0 = get_freq(dirfd, RPS_RP0_FREQ_MHZ); > >>>> rpe = get_freq(dirfd, RPS_RP1_FREQ_MHZ); > >>>> + igt_debug("GT: %d, RPn: %d, RPe: %d, RP0: %d", gt, rpn, rpe, rp0); > >>>> > >>>> /* > >>>> * Negative bound tests > >>>> @@ -90,21 +91,18 @@ static void test_reset(int i915, int dirfd, int gt, int count) > >>>> int fd; > >>>> > >>>> for (int i = 0; i < count; i++) { > >>>> - igt_assert_f(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0, > >>>> - "Failed after %d good cycles\n", i); > >>>> - igt_assert_f(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0, > >>>> - "Failed after %d good cycles\n", i); > >>>> + igt_debug("Running cycle: %d", i); > >>>> + igt_assert(set_freq(dirfd, RPS_MIN_FREQ_MHZ, rpn) > 0); > >>>> + igt_assert(set_freq(dirfd, RPS_MAX_FREQ_MHZ, rpn) > 0); > >>> I am R-b'ing this but stuff like this should be using igt_assert_lt() > >>> according to the commit message? > >>> > >>> This _lt stuff has to be fixed all over the file, not just this patch, if > >>> it brings any value (again according to the commit message). > >>> > >>> Let me know if you want to fix this now or in a later patch. I'll wait > >>> before merging. > >> Yup, I will send out another version with the corrected commit message. > > Hmm, I thought the code needs to be fixed not the commit message :) > > Ok, I meant this specific patch will address just the area where we check > for the requested frequency. I will change the remaining in a separate > patch. Ok, merged. Thanks. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-07-18 18:16 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-07-17 18:42 [Intel-gfx] [PATCH v2 i-g-t] i915_pm_freq_api: Add some debug to tests Vinay Belgaumkar 2023-07-18 1:50 ` [Intel-gfx] [igt-dev] " Dixit, Ashutosh 2023-07-18 4:19 ` Belgaumkar, Vinay 2023-07-18 4:26 ` Dixit, Ashutosh 2023-07-18 18:00 ` Belgaumkar, Vinay 2023-07-18 18:16 ` Dixit, Ashutosh
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox