Re: [Intel-gfx] [v7 0/3] Set BPP in the kernel

["Kulkarni, Vandita" <vandita.kulkarni@intel.com>]

> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces@lists.freedesktop.org> On Behalf Of
> Kulkarni, Vandita
> Sent: Thursday, July 8, 2021 3:59 PM
> To: intel-gfx@lists.freedesktop.org
> Cc: Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [Intel-gfx] [v7 0/3] Set BPP in the kernel
> 
> > -----Original Message-----
> > From: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> > Sent: Thursday, July 8, 2021 3:56 PM
> > To: intel-gfx@lists.freedesktop.org
> > Cc: Nikula, Jani <jani.nikula@intel.com>; Kulkarni, Vandita
> > <vandita.kulkarni@intel.com>
> > Subject: [v7 0/3] Set BPP in the kernel
> >
> > This series adds debugfs entry to force dsc bpp to ceratin valid test
> > value, for validation needs.
> > This series has been tested locally.
> > With the introduction of i915_dsc_bpp debugfs the expectation is that
> > whenever there is force_dsc_en set, force_dsc_bpp should have a valid
> > value for that format which is between bpp to bpp-1.
> Correction : *bpc to bpp-1
> >
> > This makes the older test kms_dp_dsc --basic fail as in that case
> > force_dsc_bpp would be 0 and is not a valid value.

The latest v2 patch fixes this, and if only force_dsc_en is set then default calculated
dsc_bpp would be assigned. (Jani)
Also, if the test sends invalid value, the driver will set the default value.( Jani)

The test app for testing force_dsc_en - basic dsc enable tests would
remain as is.

Thanks,
Vandita

> >
> > Have tested with local changes on the same.
> > The series https://patchwork.freedesktop.org/series/91772/
> > have the base patches and would need some work on the debugfs name
> > change, giving default value for force_dsc_bpp in case of
> > basic-dsc-enable test cases, clearing up of the force_dsc_bpp value while
> exiting the test.
> > Which will be floated shortly.
> >
> > Have added minor fix on the feci debugfs interface.
> > If further changes are needed on the same will float them in a
> > different series.
> >
> > Patnana Venkata Sai (1):
> >   drm/i915/display/dsc: Add Per connector debugfs node for DSC BPP
> >     enable
> >
> > Vandita Kulkarni (2):
> >   drm/i915/display: Add write permissions for fec support
> >   drm/i915/display/dsc: Force dsc BPP
> >
> >  .../drm/i915/display/intel_display_debugfs.c  | 78 ++++++++++++++++++-
> >  .../drm/i915/display/intel_display_types.h    |  1 +
> >  drivers/gpu/drm/i915/display/intel_dp.c       | 17 ++++
> >  3 files changed, 94 insertions(+), 2 deletions(-)
> >
> > --
> > 2.32.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx