[Intel-gfx] [PATCH v3 1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch

[Intel-gfx] [PATCH v3 1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch

[José Roberto de Souza]

For platforms without selective fetch this register is reserved so
do not write 0 to it.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_psr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 8a9d0bdde1bf..4e09ae61d4aa 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -942,7 +942,7 @@ static void intel_psr_enable_source(struct intel_dp *intel_dp,
 		intel_de_write(dev_priv, EXITLINE(cpu_transcoder), val);
 	}
 
-	if (HAS_PSR_HW_TRACKING(dev_priv))
+	if (HAS_PSR_HW_TRACKING(dev_priv) && HAS_PSR2_SEL_FETCH(dev_priv))
 		intel_de_rmw(dev_priv, CHICKEN_PAR1_1, IGNORE_PSR2_HW_TRACKING,
 			     dev_priv->psr.psr2_sel_fetch_enabled ?
 			     IGNORE_PSR2_HW_TRACKING : 0);
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v3 2/3] drm/i915/display: Check PSR parameter and flag only in state compute phase

[José Roberto de Souza]

Due to the debugfs flag, has_psr2 in CRTC state could have a different
value than psr.psr2_enabled and it was causing PSR2 subfeatures(DC3CO
and selective fetch) to be set to not a expected state.

So here only taking in consideration the parameter and debugfs flag
when computing PSR state, this way the CRTC state will also have
the correct state.

intel_psr_fastset_force() was already broken as
intel_psr_compute_config() was already only enabling PSR when
psr_global_enabled() and all other PSR requirements are met.
So some changes was required in this function, now it iterates over
all connectors, if it is a eDP connector and is active force a modeset
in the CRTC driving this connector, what will cause the new PSR state
to be set based on the debugfs flag.

v2:
- end connector iterator in error cases

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_psr.c | 73 +++++++++++++-----------
 1 file changed, 41 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 4e09ae61d4aa..02f74b0ddec1 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -91,19 +91,14 @@ static bool psr_global_enabled(struct drm_i915_private *i915)
 	}
 }
 
-static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
-			       const struct intel_crtc_state *crtc_state)
+static bool psr2_global_enabled(struct drm_i915_private *dev_priv)
 {
-	/* Cannot enable DSC and PSR2 simultaneously */
-	drm_WARN_ON(&dev_priv->drm, crtc_state->dsc.compression_enable &&
-		    crtc_state->has_psr2);
-
 	switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
 	case I915_PSR_DEBUG_DISABLE:
 	case I915_PSR_DEBUG_FORCE_PSR1:
 		return false;
 	default:
-		return crtc_state->has_psr2;
+		return true;
 	}
 }
 
@@ -729,6 +724,11 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 		return false;
 	}
 
+	if (!psr2_global_enabled(dev_priv)) {
+		drm_dbg_kms(&dev_priv->drm, "PSR2 disabled by flag\n");
+		return false;
+	}
+
 	/*
 	 * DSC and PSR2 cannot be enabled simultaneously. If a requested
 	 * resolution requires DSC to be enabled, priority is given to DSC
@@ -817,8 +817,11 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
 	if (intel_dp != dev_priv->psr.dp)
 		return;
 
-	if (!psr_global_enabled(dev_priv))
+	if (!psr_global_enabled(dev_priv)) {
+		drm_dbg_kms(&dev_priv->drm, "PSR disabled by flag\n");
 		return;
+	}
+
 	/*
 	 * HSW spec explicitly says PSR is tied to port A.
 	 * BDW+ platforms have a instance of PSR registers per transcoder but
@@ -959,7 +962,7 @@ static void intel_psr_enable_locked(struct drm_i915_private *dev_priv,
 
 	drm_WARN_ON(&dev_priv->drm, dev_priv->psr.enabled);
 
-	dev_priv->psr.psr2_enabled = intel_psr2_enabled(dev_priv, crtc_state);
+	dev_priv->psr.psr2_enabled = crtc_state->has_psr2;
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 	dev_priv->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe;
 	dev_priv->psr.dc3co_enabled = !!crtc_state->dc3co_exitline;
@@ -1029,15 +1032,7 @@ void intel_psr_enable(struct intel_dp *intel_dp,
 	drm_WARN_ON(&dev_priv->drm, dev_priv->drrs.dp);
 
 	mutex_lock(&dev_priv->psr.lock);
-
-	if (!psr_global_enabled(dev_priv)) {
-		drm_dbg_kms(&dev_priv->drm, "PSR disabled by flag\n");
-		goto unlock;
-	}
-
 	intel_psr_enable_locked(dev_priv, crtc_state, conn_state);
-
-unlock:
 	mutex_unlock(&dev_priv->psr.lock);
 }
 
@@ -1222,8 +1217,8 @@ void intel_psr_update(struct intel_dp *intel_dp,
 
 	mutex_lock(&dev_priv->psr.lock);
 
-	enable = crtc_state->has_psr && psr_global_enabled(dev_priv);
-	psr2_enable = intel_psr2_enabled(dev_priv, crtc_state);
+	enable = crtc_state->has_psr;
+	psr2_enable = crtc_state->has_psr2;
 
 	if (enable == psr->enabled && psr2_enable == psr->psr2_enabled) {
 		/* Force a PSR exit when enabling CRC to avoid CRC timeouts */
@@ -1320,11 +1315,12 @@ static bool __psr_wait_for_idle_locked(struct drm_i915_private *dev_priv)
 
 static int intel_psr_fastset_force(struct drm_i915_private *dev_priv)
 {
+	struct drm_connector_list_iter conn_iter;
 	struct drm_device *dev = &dev_priv->drm;
 	struct drm_modeset_acquire_ctx ctx;
 	struct drm_atomic_state *state;
-	struct intel_crtc *crtc;
-	int err;
+	struct drm_connector *conn;
+	int err = 0;
 
 	state = drm_atomic_state_alloc(dev);
 	if (!state)
@@ -1334,25 +1330,38 @@ static int intel_psr_fastset_force(struct drm_i915_private *dev_priv)
 	state->acquire_ctx = &ctx;
 
 retry:
-	for_each_intel_crtc(dev, crtc) {
-		struct intel_crtc_state *crtc_state =
-			intel_atomic_get_crtc_state(state, crtc);
 
-		if (IS_ERR(crtc_state)) {
-			err = PTR_ERR(crtc_state);
-			goto error;
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(conn, &conn_iter) {
+		struct drm_connector_state *conn_state;
+		struct drm_crtc_state *crtc_state;
+
+		if (conn->connector_type != DRM_MODE_CONNECTOR_eDP)
+			continue;
+
+		conn_state = drm_atomic_get_connector_state(state, conn);
+		if (IS_ERR(conn_state)) {
+			err = PTR_ERR(conn_state);
+			break;
 		}
 
-		if (crtc_state->hw.active && crtc_state->has_psr) {
-			/* Mark mode as changed to trigger a pipe->update() */
-			crtc_state->uapi.mode_changed = true;
+		if (!conn_state->crtc)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc);
+		if (IS_ERR(crtc_state)) {
+			err = PTR_ERR(crtc_state);
 			break;
 		}
+
+		/* Mark mode as changed to trigger a pipe->update() */
+		crtc_state->mode_changed = true;
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
-	err = drm_atomic_commit(state);
+	if (err == 0)
+		err = drm_atomic_commit(state);
 
-error:
 	if (err == -EDEADLK) {
 		drm_atomic_state_clear(state);
 		err = drm_modeset_backoff(&ctx);
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v3 3/3] drm/i915/display: Program PSR2 selective fetch registers

[José Roberto de Souza]

Another step towards PSR2 selective fetch, here programming plane
selective fetch registers and MAN_TRK_CTL enabling selective fetch but
for now it is fetching the whole area of the planes.
The damaged area calculation will come as next and final step.

v2:
- removed warn on when no plane is visible in state
- removed calculations using plane damaged area in
intel_psr2_program_plane_sel_fetch()

v3:
- do not shift 16 positions the plane dst coordinates, only src is shifted

BSpec: 55229
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c |  10 +-
 drivers/gpu/drm/i915/display/intel_psr.c     | 120 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_psr.h     |  10 +-
 drivers/gpu/drm/i915/display/intel_sprite.c  |   3 +
 4 files changed, 134 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 5a9d933e425a..96bc515497c1 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -11812,6 +11812,9 @@ static void i9xx_update_cursor(struct intel_plane *plane,
 	if (INTEL_GEN(dev_priv) >= 9)
 		skl_write_cursor_wm(plane, crtc_state);
 
+	if (!needs_modeset(crtc_state))
+		intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, 0);
+
 	if (plane->cursor.base != base ||
 	    plane->cursor.size != fbc_ctl ||
 	    plane->cursor.cntl != cntl) {
@@ -12823,8 +12826,11 @@ static int intel_crtc_atomic_check(struct intel_atomic_state *state,
 
 	}
 
-	if (!mode_changed)
-		intel_psr2_sel_fetch_update(state, crtc);
+	if (!mode_changed) {
+		ret = intel_psr2_sel_fetch_update(state, crtc);
+		if (ret)
+			return ret;
+	}
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 02f74b0ddec1..deb0523f9f29 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -1166,6 +1166,41 @@ static void psr_force_hw_tracking_exit(struct drm_i915_private *dev_priv)
 		intel_psr_exit(dev_priv);
 }
 
+void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
+					const struct intel_crtc_state *crtc_state,
+					const struct intel_plane_state *plane_state,
+					int color_plane)
+{
+	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+	enum pipe pipe = plane->pipe;
+	u32 val;
+
+	if (!crtc_state->enable_psr2_sel_fetch)
+		return;
+
+	/*
+	 * skl_plane_ctl_crtc()/i9xx_cursor_ctl_crtc() return 0 for gen11+, so
+	 * plane_state->ctl is the right value
+	 */
+	val = plane_state ? plane_state->ctl : 0;
+	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane->id), val);
+	if (!val || plane->id == PLANE_CURSOR)
+		return;
+
+	val = plane_state->uapi.dst.y1 << 16 | plane_state->uapi.dst.x1;
+	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe, plane->id), val);
+
+	val = plane_state->color_plane[color_plane].y << 16;
+	val |= plane_state->color_plane[color_plane].x;
+	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_OFFSET(pipe, plane->id),
+			  val);
+
+	/* Sizes are 0 based */
+	val = ((drm_rect_height(&plane_state->uapi.src) >> 16) - 1) << 16;
+	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) - 1;
+	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe, plane->id), val);
+}
+
 void intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
@@ -1180,16 +1215,91 @@ void intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state *crtc_st
 		       crtc_state->psr2_man_track_ctl);
 }
 
-void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
-				 struct intel_crtc *crtc)
+static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state,
+				  struct drm_rect *clip, bool full_update)
+{
+	u32 val = PSR2_MAN_TRK_CTL_ENABLE;
+
+	if (full_update) {
+		val |= PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
+		goto exit;
+	}
+
+	if (clip->y1 == -1)
+		goto exit;
+
+	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
+	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1);
+	val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip->y2, 4) + 1);
+exit:
+	crtc_state->psr2_man_track_ctl = val;
+}
+
+static void clip_area_update(struct drm_rect *overlap_damage_area,
+			     struct drm_rect *damage_area)
+{
+	if (overlap_damage_area->y1 == -1) {
+		overlap_damage_area->y1 = damage_area->y1;
+		overlap_damage_area->y2 = damage_area->y2;
+		return;
+	}
+
+	if (damage_area->y1 < overlap_damage_area->y1)
+		overlap_damage_area->y1 = damage_area->y1;
+
+	if (damage_area->y2 > overlap_damage_area->y2)
+		overlap_damage_area->y2 = damage_area->y2;
+}
+
+int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
+				struct intel_crtc *crtc)
 {
 	struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
+	struct intel_plane_state *new_plane_state, *old_plane_state;
+	struct drm_rect pipe_clip = { .y1 = -1 };
+	struct intel_plane *plane;
+	bool full_update = false;
+	int i, ret;
 
 	if (!crtc_state->enable_psr2_sel_fetch)
-		return;
+		return 0;
+
+	ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
+	if (ret)
+		return ret;
+
+	for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
+					     new_plane_state, i) {
+		struct drm_rect temp;
+
+		if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc)
+			continue;
 
-	crtc_state->psr2_man_track_ctl = PSR2_MAN_TRK_CTL_ENABLE |
-					 PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
+		/*
+		 * TODO: Not clear how to handle planes with negative position,
+		 * also planes are not updated if they have a negative X
+		 * position so for now doing a full update in this cases
+		 */
+		if (new_plane_state->uapi.dst.y1 < 0 ||
+		    new_plane_state->uapi.dst.x1 < 0) {
+			full_update = true;
+			break;
+		}
+
+		if (!new_plane_state->uapi.visible)
+			continue;
+
+		/*
+		 * For now doing a selective fetch in the whole plane area,
+		 * optimizations will come in the future.
+		 */
+		temp.y1 = new_plane_state->uapi.dst.y1;
+		temp.y2 = new_plane_state->uapi.dst.y2;
+		clip_area_update(&pipe_clip, &temp);
+	}
+
+	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update);
+	return 0;
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/display/intel_psr.h b/drivers/gpu/drm/i915/display/intel_psr.h
index 6a83c8e682e6..3eca9dcec3c0 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.h
+++ b/drivers/gpu/drm/i915/display/intel_psr.h
@@ -15,6 +15,8 @@ struct intel_crtc_state;
 struct intel_dp;
 struct intel_crtc;
 struct intel_atomic_state;
+struct intel_plane_state;
+struct intel_plane;
 
 #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv->psr.sink_support)
 void intel_psr_init_dpcd(struct intel_dp *intel_dp);
@@ -45,8 +47,12 @@ void intel_psr_atomic_check(struct drm_connector *connector,
 			    struct drm_connector_state *old_state,
 			    struct drm_connector_state *new_state);
 void intel_psr_set_force_mode_changed(struct intel_dp *intel_dp);
-void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
-				 struct intel_crtc *crtc);
+int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
+				struct intel_crtc *crtc);
 void intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state *crtc_state);
+void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
+					const struct intel_crtc_state *crtc_state,
+					const struct intel_plane_state *plane_state,
+					int color_plane);
 
 #endif /* __INTEL_PSR_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
index 63040cb0d4e1..f12425b90607 100644
--- a/drivers/gpu/drm/i915/display/intel_sprite.c
+++ b/drivers/gpu/drm/i915/display/intel_sprite.c
@@ -690,6 +690,9 @@ skl_program_plane(struct intel_plane *plane,
 		intel_de_write_fw(dev_priv, PLANE_AUX_OFFSET(pipe, plane_id),
 				  (plane_state->color_plane[1].y << 16) | plane_state->color_plane[1].x);
 
+	if (!drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
+		intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, color_plane);
+
 	/*
 	 * The control register self-arms if the plane was previously
 	 * disabled. Try to make the plane enable atomic by writing
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v3 3/3] drm/i915/display: Program PSR2 selective fetch registers

[Mun, Gwan-gyeong]

On Thu, 2020-09-17 at 18:02 -0700, José Roberto de Souza wrote:
> Another step towards PSR2 selective fetch, here programming plane
> selective fetch registers and MAN_TRK_CTL enabling selective fetch
> but
> for now it is fetching the whole area of the planes.
> The damaged area calculation will come as next and final step.
> 
> v2:
> - removed warn on when no plane is visible in state
> - removed calculations using plane damaged area in
> intel_psr2_program_plane_sel_fetch()
> 
> v3:
> - do not shift 16 positions the plane dst coordinates, only src is
> shifted
> 
> BSpec: 55229
> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c |  10 +-
>  drivers/gpu/drm/i915/display/intel_psr.c     | 120
> ++++++++++++++++++-
>  drivers/gpu/drm/i915/display/intel_psr.h     |  10 +-
>  drivers/gpu/drm/i915/display/intel_sprite.c  |   3 +
>  4 files changed, 134 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 5a9d933e425a..96bc515497c1 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -11812,6 +11812,9 @@ static void i9xx_update_cursor(struct
> intel_plane *plane,
>  	if (INTEL_GEN(dev_priv) >= 9)
>  		skl_write_cursor_wm(plane, crtc_state);
>  
> +	if (!needs_modeset(crtc_state))
> +		intel_psr2_program_plane_sel_fetch(plane, crtc_state,
> plane_state, 0);
> +
>  	if (plane->cursor.base != base ||
>  	    plane->cursor.size != fbc_ctl ||
>  	    plane->cursor.cntl != cntl) {
> @@ -12823,8 +12826,11 @@ static int intel_crtc_atomic_check(struct
> intel_atomic_state *state,
>  
>  	}
>  
> -	if (!mode_changed)
> -		intel_psr2_sel_fetch_update(state, crtc);
> +	if (!mode_changed) {
> +		ret = intel_psr2_sel_fetch_update(state, crtc);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 02f74b0ddec1..deb0523f9f29 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -1166,6 +1166,41 @@ static void psr_force_hw_tracking_exit(struct
> drm_i915_private *dev_priv)
>  		intel_psr_exit(dev_priv);
>  }
>  
> +void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> +					const struct intel_crtc_state
> *crtc_state,
> +					const struct intel_plane_state
> *plane_state,
> +					int color_plane)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> +	enum pipe pipe = plane->pipe;
> +	u32 val;
> +
> +	if (!crtc_state->enable_psr2_sel_fetch)
> +		return;
> +
> +	/*
> +	 * skl_plane_ctl_crtc()/i9xx_cursor_ctl_crtc() return 0 for
> gen11+, so
> +	 * plane_state->ctl is the right value
> +	 */
> +	val = plane_state ? plane_state->ctl : 0;
IMHO, skl_plane_ctl() might set other ctl bits, it would be better to
have separated ctl bit value for "selective fetch ctl".
> +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane-
> >id), val);
> +	if (!val || plane->id == PLANE_CURSOR)
> +		return;
> +
> +	val = plane_state->uapi.dst.y1 << 16 | plane_state-
> >uapi.dst.x1;
> +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe, plane-
> >id), val);
> +
> +	val = plane_state->color_plane[color_plane].y << 16;
> +	val |= plane_state->color_plane[color_plane].x;
> +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_OFFSET(pipe, plane-
> >id),
> +			  val);
> +
> +	/* Sizes are 0 based */
> +	val = ((drm_rect_height(&plane_state->uapi.src) >> 16) - 1) <<
> 16;
> +	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) - 1;
> +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe, plane-
> >id), val);
> +}
> +
>  void intel_psr2_program_trans_man_trk_ctl(const struct
> intel_crtc_state *crtc_state)
>  {
>  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> @@ -1180,16 +1215,91 @@ void
> intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state
> *crtc_st
>  		       crtc_state->psr2_man_track_ctl);
>  }
>  
> -void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> -				 struct intel_crtc *crtc)
> +static void psr2_man_trk_ctl_calc(struct intel_crtc_state
> *crtc_state,
> +				  struct drm_rect *clip, bool
> full_update)
> +{
> +	u32 val = PSR2_MAN_TRK_CTL_ENABLE;
> +
> +	if (full_update) {
> +		val |= PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
> +		goto exit;
> +	}
> +
> +	if (clip->y1 == -1)
> +		goto exit;
> +
> +	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
> +	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1);
I think the start address block would be like this too.
PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(DIV_ROUND_UP(clip->y1 , 4));
> +	val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip-
> >y2, 4) + 1);
> +exit:
> +	crtc_state->psr2_man_track_ctl = val;
> +}
> +
> +static void clip_area_update(struct drm_rect *overlap_damage_area,
> +			     struct drm_rect *damage_area)
> +{
> +	if (overlap_damage_area->y1 == -1) {
> +		overlap_damage_area->y1 = damage_area->y1;
> +		overlap_damage_area->y2 = damage_area->y2;
> +		return;
> +	}
> +
> +	if (damage_area->y1 < overlap_damage_area->y1)
> +		overlap_damage_area->y1 = damage_area->y1;
> +
> +	if (damage_area->y2 > overlap_damage_area->y2)
> +		overlap_damage_area->y2 = damage_area->y2;
> +}
> +
> +int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> +				struct intel_crtc *crtc)
>  {
>  	struct intel_crtc_state *crtc_state =
> intel_atomic_get_new_crtc_state(state, crtc);
> +	struct intel_plane_state *new_plane_state, *old_plane_state;
> +	struct drm_rect pipe_clip = { .y1 = -1 };
> +	struct intel_plane *plane;
> +	bool full_update = false;
> +	int i, ret;
>  
>  	if (!crtc_state->enable_psr2_sel_fetch)
> -		return;
> +		return 0;
> +
> +	ret = drm_atomic_add_affected_planes(&state->base, &crtc-
> >base);
> +	if (ret)
> +		return ret;
> +
> +	for_each_oldnew_intel_plane_in_state(state, plane,
> old_plane_state,
> +					     new_plane_state, i) {
> +		struct drm_rect temp;
> +
> +		if (new_plane_state->uapi.crtc != crtc_state-
> >uapi.crtc)
> +			continue;
>  
> -	crtc_state->psr2_man_track_ctl = PSR2_MAN_TRK_CTL_ENABLE |
> -					 PSR2_MAN_TRK_CTL_SF_SINGLE_FUL
> L_FRAME;
> +		/*
> +		 * TODO: Not clear how to handle planes with negative
> position,
> +		 * also planes are not updated if they have a negative
> X
> +		 * position so for now doing a full update in this
> cases
> +		 */
> +		if (new_plane_state->uapi.dst.y1 < 0 ||
> +		    new_plane_state->uapi.dst.x1 < 0) {
> +			full_update = true;
> +			break;
> +		}
> +
> +		if (!new_plane_state->uapi.visible)
> +			continue;
> +
> +		/*
> +		 * For now doing a selective fetch in the whole plane
> area,
> +		 * optimizations will come in the future.
> +		 */
> +		temp.y1 = new_plane_state->uapi.dst.y1;
> +		temp.y2 = new_plane_state->uapi.dst.y2;
> +		clip_area_update(&pipe_clip, &temp);
> +	}
> +
> +	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update);
> +	return 0;
>  }
>  
>  /**
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> b/drivers/gpu/drm/i915/display/intel_psr.h
> index 6a83c8e682e6..3eca9dcec3c0 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> @@ -15,6 +15,8 @@ struct intel_crtc_state;
>  struct intel_dp;
>  struct intel_crtc;
>  struct intel_atomic_state;
> +struct intel_plane_state;
> +struct intel_plane;
>  
>  #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv-
> >psr.sink_support)
>  void intel_psr_init_dpcd(struct intel_dp *intel_dp);
> @@ -45,8 +47,12 @@ void intel_psr_atomic_check(struct drm_connector
> *connector,
>  			    struct drm_connector_state *old_state,
>  			    struct drm_connector_state *new_state);
>  void intel_psr_set_force_mode_changed(struct intel_dp *intel_dp);
> -void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> -				 struct intel_crtc *crtc);
> +int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> +				struct intel_crtc *crtc);
>  void intel_psr2_program_trans_man_trk_ctl(const struct
> intel_crtc_state *crtc_state);
> +void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> +					const struct intel_crtc_state
> *crtc_state,
> +					const struct intel_plane_state
> *plane_state,
> +					int color_plane);
>  
>  #endif /* __INTEL_PSR_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> b/drivers/gpu/drm/i915/display/intel_sprite.c
> index 63040cb0d4e1..f12425b90607 100644
> --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> @@ -690,6 +690,9 @@ skl_program_plane(struct intel_plane *plane,
>  		intel_de_write_fw(dev_priv, PLANE_AUX_OFFSET(pipe,
> plane_id),
>  				  (plane_state->color_plane[1].y << 16)
> | plane_state->color_plane[1].x);
>  
> +	if (!drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
> +		intel_psr2_program_plane_sel_fetch(plane, crtc_state,
> plane_state, color_plane);
> +
>  	/*
>  	 * The control register self-arms if the plane was previously
>  	 * disabled. Try to make the plane enable atomic by writing
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v3 3/3] drm/i915/display: Program PSR2 selective fetch registers

[Souza, Jose]

On Wed, 2020-09-23 at 14:02 +0100, Mun, Gwan-gyeong wrote:
> On Thu, 2020-09-17 at 18:02 -0700, José Roberto de Souza wrote:
> > Another step towards PSR2 selective fetch, here programming plane
> > selective fetch registers and MAN_TRK_CTL enabling selective fetch
> > but
> > for now it is fetching the whole area of the planes.
> > The damaged area calculation will come as next and final step.
> > 
> > v2:
> > - removed warn on when no plane is visible in state
> > - removed calculations using plane damaged area in
> > intel_psr2_program_plane_sel_fetch()
> > 
> > v3:
> > - do not shift 16 positions the plane dst coordinates, only src is
> > shifted
> > 
> > BSpec: 55229
> > Cc: Gwan-gyeong Mun <
> > gwan-gyeong.mun@intel.com
> > >
> > Cc: Ville Syrjälä <
> > ville.syrjala@linux.intel.com
> > >
> > Signed-off-by: José Roberto de Souza <
> > jose.souza@intel.com
> > >
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c |  10 +-
> >  drivers/gpu/drm/i915/display/intel_psr.c     | 120
> > ++++++++++++++++++-
> >  drivers/gpu/drm/i915/display/intel_psr.h     |  10 +-
> >  drivers/gpu/drm/i915/display/intel_sprite.c  |   3 +
> >  4 files changed, 134 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 5a9d933e425a..96bc515497c1 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -11812,6 +11812,9 @@ static void i9xx_update_cursor(struct
> > intel_plane *plane,
> >  	if (INTEL_GEN(dev_priv) >= 9)
> >  		skl_write_cursor_wm(plane, crtc_state);
> >  
> > +	if (!needs_modeset(crtc_state))
> > +		intel_psr2_program_plane_sel_fetch(plane, crtc_state,
> > plane_state, 0);
> > +
> >  	if (plane->cursor.base != base ||
> >  	    plane->cursor.size != fbc_ctl ||
> >  	    plane->cursor.cntl != cntl) {
> > @@ -12823,8 +12826,11 @@ static int intel_crtc_atomic_check(struct
> > intel_atomic_state *state,
> >  
> >  	}
> >  
> > -	if (!mode_changed)
> > -		intel_psr2_sel_fetch_update(state, crtc);
> > +	if (!mode_changed) {
> > +		ret = intel_psr2_sel_fetch_update(state, crtc);
> > +		if (ret)
> > +			return ret;
> > +	}
> >  
> >  	return 0;
> >  }
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > b/drivers/gpu/drm/i915/display/intel_psr.c
> > index 02f74b0ddec1..deb0523f9f29 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > @@ -1166,6 +1166,41 @@ static void psr_force_hw_tracking_exit(struct
> > drm_i915_private *dev_priv)
> >  		intel_psr_exit(dev_priv);
> >  }
> >  
> > +void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> > +					const struct intel_crtc_state
> > *crtc_state,
> > +					const struct intel_plane_state
> > *plane_state,
> > +					int color_plane)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > +	enum pipe pipe = plane->pipe;
> > +	u32 val;
> > +
> > +	if (!crtc_state->enable_psr2_sel_fetch)
> > +		return;
> > +
> > +	/*
> > +	 * skl_plane_ctl_crtc()/i9xx_cursor_ctl_crtc() return 0 for
> > gen11+, so
> > +	 * plane_state->ctl is the right value
> > +	 */
> > +	val = plane_state ? plane_state->ctl : 0;
> 
> IMHO, skl_plane_ctl() might set other ctl bits, it would be better to
> have separated ctl bit value for "selective fetch ctl".

Like said all other bits are spares so can be set without issues but okay will a "plane_state->ctl & PLANE_SEL_FETCH_CTL_ENABLE".

> > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane-
> > > id), val);
> > 
> > +	if (!val || plane->id == PLANE_CURSOR)
> > +		return;
> > +
> > +	val = plane_state->uapi.dst.y1 << 16 | plane_state-
> > > uapi.dst.x1;
> > 
> > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe, plane-
> > > id), val);
> > 
> > +
> > +	val = plane_state->color_plane[color_plane].y << 16;
> > +	val |= plane_state->color_plane[color_plane].x;
> > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_OFFSET(pipe, plane-
> > > id),
> > 
> > +			  val);
> > +
> > +	/* Sizes are 0 based */
> > +	val = ((drm_rect_height(&plane_state->uapi.src) >> 16) - 1) <<
> > 16;
> > +	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) - 1;
> > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe, plane-
> > > id), val);
> > 
> > +}
> > +
> >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > intel_crtc_state *crtc_state)
> >  {
> >  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > @@ -1180,16 +1215,91 @@ void
> > intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state
> > *crtc_st
> >  		       crtc_state->psr2_man_track_ctl);
> >  }
> >  
> > -void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > -				 struct intel_crtc *crtc)
> > +static void psr2_man_trk_ctl_calc(struct intel_crtc_state
> > *crtc_state,
> > +				  struct drm_rect *clip, bool
> > full_update)
> > +{
> > +	u32 val = PSR2_MAN_TRK_CTL_ENABLE;
> > +
> > +	if (full_update) {
> > +		val |= PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
> > +		goto exit;
> > +	}
> > +
> > +	if (clip->y1 == -1)
> > +		goto exit;
> > +
> > +	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
> > +	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1);
> 
> I think the start address block would be like this too.
> PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(DIV_ROUND_UP(clip->y1 , 4));

This would not match for numbers that divide by 4.
y pos 0 = region 1y pos 1 = region 1
y pos 4 = region 2


> > +	val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip-
> > > y2, 4) + 1);
> > 
> > +exit:
> > +	crtc_state->psr2_man_track_ctl = val;
> > +}
> > +
> > +static void clip_area_update(struct drm_rect *overlap_damage_area,
> > +			     struct drm_rect *damage_area)
> > +{
> > +	if (overlap_damage_area->y1 == -1) {
> > +		overlap_damage_area->y1 = damage_area->y1;
> > +		overlap_damage_area->y2 = damage_area->y2;
> > +		return;
> > +	}
> > +
> > +	if (damage_area->y1 < overlap_damage_area->y1)
> > +		overlap_damage_area->y1 = damage_area->y1;
> > +
> > +	if (damage_area->y2 > overlap_damage_area->y2)
> > +		overlap_damage_area->y2 = damage_area->y2;
> > +}
> > +
> > +int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > +				struct intel_crtc *crtc)
> >  {
> >  	struct intel_crtc_state *crtc_state =
> > intel_atomic_get_new_crtc_state(state, crtc);
> > +	struct intel_plane_state *new_plane_state, *old_plane_state;
> > +	struct drm_rect pipe_clip = { .y1 = -1 };
> > +	struct intel_plane *plane;
> > +	bool full_update = false;
> > +	int i, ret;
> >  
> >  	if (!crtc_state->enable_psr2_sel_fetch)
> > -		return;
> > +		return 0;
> > +
> > +	ret = drm_atomic_add_affected_planes(&state->base, &crtc-
> > > base);
> > 
> > +	if (ret)
> > +		return ret;
> > +
> > +	for_each_oldnew_intel_plane_in_state(state, plane,
> > old_plane_state,
> > +					     new_plane_state, i) {
> > +		struct drm_rect temp;
> > +
> > +		if (new_plane_state->uapi.crtc != crtc_state-
> > > uapi.crtc)
> > 
> > +			continue;
> >  
> > -	crtc_state->psr2_man_track_ctl = PSR2_MAN_TRK_CTL_ENABLE |
> > -					 PSR2_MAN_TRK_CTL_SF_SINGLE_FUL
> > L_FRAME;
> > +		/*
> > +		 * TODO: Not clear how to handle planes with negative
> > position,
> > +		 * also planes are not updated if they have a negative
> > X
> > +		 * position so for now doing a full update in this
> > cases
> > +		 */
> > +		if (new_plane_state->uapi.dst.y1 < 0 ||
> > +		    new_plane_state->uapi.dst.x1 < 0) {
> > +			full_update = true;
> > +			break;
> > +		}
> > +
> > +		if (!new_plane_state->uapi.visible)
> > +			continue;
> > +
> > +		/*
> > +		 * For now doing a selective fetch in the whole plane
> > area,
> > +		 * optimizations will come in the future.
> > +		 */
> > +		temp.y1 = new_plane_state->uapi.dst.y1;
> > +		temp.y2 = new_plane_state->uapi.dst.y2;
> > +		clip_area_update(&pipe_clip, &temp);
> > +	}
> > +
> > +	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update);
> > +	return 0;
> >  }
> >  
> >  /**
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> > b/drivers/gpu/drm/i915/display/intel_psr.h
> > index 6a83c8e682e6..3eca9dcec3c0 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr.h
> > +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> > @@ -15,6 +15,8 @@ struct intel_crtc_state;
> >  struct intel_dp;
> >  struct intel_crtc;
> >  struct intel_atomic_state;
> > +struct intel_plane_state;
> > +struct intel_plane;
> >  
> >  #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv-
> > > psr.sink_support)
> > 
> >  void intel_psr_init_dpcd(struct intel_dp *intel_dp);
> > @@ -45,8 +47,12 @@ void intel_psr_atomic_check(struct drm_connector
> > *connector,
> >  			    struct drm_connector_state *old_state,
> >  			    struct drm_connector_state *new_state);
> >  void intel_psr_set_force_mode_changed(struct intel_dp *intel_dp);
> > -void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > -				 struct intel_crtc *crtc);
> > +int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > +				struct intel_crtc *crtc);
> >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > intel_crtc_state *crtc_state);
> > +void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> > +					const struct intel_crtc_state
> > *crtc_state,
> > +					const struct intel_plane_state
> > *plane_state,
> > +					int color_plane);
> >  
> >  #endif /* __INTEL_PSR_H__ */
> > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> > b/drivers/gpu/drm/i915/display/intel_sprite.c
> > index 63040cb0d4e1..f12425b90607 100644
> > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > @@ -690,6 +690,9 @@ skl_program_plane(struct intel_plane *plane,
> >  		intel_de_write_fw(dev_priv, PLANE_AUX_OFFSET(pipe,
> > plane_id),
> >  				  (plane_state->color_plane[1].y << 16)
> > > plane_state->color_plane[1].x);
> > 
> >  
> > +	if (!drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
> > +		intel_psr2_program_plane_sel_fetch(plane, crtc_state,
> > plane_state, color_plane);
> > +
> >  	/*
> >  	 * The control register self-arms if the plane was previously
> >  	 * disabled. Try to make the plane enable atomic by writing
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v3 3/3] drm/i915/display: Program PSR2 selective fetch registers

[Souza, Jose]

On Wed, 2020-09-23 at 10:10 -0700, José Roberto de Souza wrote:
> On Wed, 2020-09-23 at 14:02 +0100, Mun, Gwan-gyeong wrote:
> > On Thu, 2020-09-17 at 18:02 -0700, José Roberto de Souza wrote:
> > > Another step towards PSR2 selective fetch, here programming plane
> > > selective fetch registers and MAN_TRK_CTL enabling selective fetch
> > > but
> > > for now it is fetching the whole area of the planes.
> > > The damaged area calculation will come as next and final step.
> > > 
> > > v2:
> > > - removed warn on when no plane is visible in state
> > > - removed calculations using plane damaged area in
> > > intel_psr2_program_plane_sel_fetch()
> > > 
> > > v3:
> > > - do not shift 16 positions the plane dst coordinates, only src is
> > > shifted
> > > 
> > > BSpec: 55229
> > > Cc: Gwan-gyeong Mun <
> > > gwan-gyeong.mun@intel.com
> > > 
> > > 
> > > Cc: Ville Syrjälä <
> > > ville.syrjala@linux.intel.com
> > > 
> > > 
> > > Signed-off-by: José Roberto de Souza <
> > > jose.souza@intel.com
> > > 
> > > 
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_display.c |  10 +-
> > >  drivers/gpu/drm/i915/display/intel_psr.c     | 120
> > > ++++++++++++++++++-
> > >  drivers/gpu/drm/i915/display/intel_psr.h     |  10 +-
> > >  drivers/gpu/drm/i915/display/intel_sprite.c  |   3 +
> > >  4 files changed, 134 insertions(+), 9 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > index 5a9d933e425a..96bc515497c1 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -11812,6 +11812,9 @@ static void i9xx_update_cursor(struct
> > > intel_plane *plane,
> > >  	if (INTEL_GEN(dev_priv) >= 9)
> > >  		skl_write_cursor_wm(plane, crtc_state);
> > >  
> > > +	if (!needs_modeset(crtc_state))
> > > +		intel_psr2_program_plane_sel_fetch(plane, crtc_state,
> > > plane_state, 0);
> > > +
> > >  	if (plane->cursor.base != base ||
> > >  	    plane->cursor.size != fbc_ctl ||
> > >  	    plane->cursor.cntl != cntl) {
> > > @@ -12823,8 +12826,11 @@ static int intel_crtc_atomic_check(struct
> > > intel_atomic_state *state,
> > >  
> > >  	}
> > >  
> > > -	if (!mode_changed)
> > > -		intel_psr2_sel_fetch_update(state, crtc);
> > > +	if (!mode_changed) {
> > > +		ret = intel_psr2_sel_fetch_update(state, crtc);
> > > +		if (ret)
> > > +			return ret;
> > > +	}
> > >  
> > >  	return 0;
> > >  }
> > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > > b/drivers/gpu/drm/i915/display/intel_psr.c
> > > index 02f74b0ddec1..deb0523f9f29 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > > @@ -1166,6 +1166,41 @@ static void psr_force_hw_tracking_exit(struct
> > > drm_i915_private *dev_priv)
> > >  		intel_psr_exit(dev_priv);
> > >  }
> > >  
> > > +void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> > > +					const struct intel_crtc_state
> > > *crtc_state,
> > > +					const struct intel_plane_state
> > > *plane_state,
> > > +					int color_plane)
> > > +{
> > > +	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > > +	enum pipe pipe = plane->pipe;
> > > +	u32 val;
> > > +
> > > +	if (!crtc_state->enable_psr2_sel_fetch)
> > > +		return;
> > > +
> > > +	/*
> > > +	 * skl_plane_ctl_crtc()/i9xx_cursor_ctl_crtc() return 0 for
> > > gen11+, so
> > > +	 * plane_state->ctl is the right value
> > > +	 */
> > > +	val = plane_state ? plane_state->ctl : 0;
> > 
> > IMHO, skl_plane_ctl() might set other ctl bits, it would be better to
> > have separated ctl bit value for "selective fetch ctl".
> 
> Like said all other bits are spares so can be set without issues but okay will a "plane_state->ctl & PLANE_SEL_FETCH_CTL_ENABLE".

Please take a look to the answer of your other comment bellow, with the change above can I have your rv-b?

> 
> > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe, plane-
> > > > id), val);
> > > 
> > > +	if (!val || plane->id == PLANE_CURSOR)
> > > +		return;
> > > +
> > > +	val = plane_state->uapi.dst.y1 << 16 | plane_state-
> > > > uapi.dst.x1;
> > > 
> > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe, plane-
> > > > id), val);
> > > 
> > > +
> > > +	val = plane_state->color_plane[color_plane].y << 16;
> > > +	val |= plane_state->color_plane[color_plane].x;
> > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_OFFSET(pipe, plane-
> > > > id),
> > > 
> > > +			  val);
> > > +
> > > +	/* Sizes are 0 based */
> > > +	val = ((drm_rect_height(&plane_state->uapi.src) >> 16) - 1) <<
> > > 16;
> > > +	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) - 1;
> > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe, plane-
> > > > id), val);
> > > 
> > > +}
> > > +
> > >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > > intel_crtc_state *crtc_state)
> > >  {
> > >  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > @@ -1180,16 +1215,91 @@ void
> > > intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state
> > > *crtc_st
> > >  		       crtc_state->psr2_man_track_ctl);
> > >  }
> > >  
> > > -void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > -				 struct intel_crtc *crtc)
> > > +static void psr2_man_trk_ctl_calc(struct intel_crtc_state
> > > *crtc_state,
> > > +				  struct drm_rect *clip, bool
> > > full_update)
> > > +{
> > > +	u32 val = PSR2_MAN_TRK_CTL_ENABLE;
> > > +
> > > +	if (full_update) {
> > > +		val |= PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
> > > +		goto exit;
> > > +	}
> > > +
> > > +	if (clip->y1 == -1)
> > > +		goto exit;
> > > +
> > > +	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
> > > +	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1);
> > 
> > I think the start address block would be like this too.
> > PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(DIV_ROUND_UP(clip->y1 , 4));
> 
> This would not match for numbers that divide by 4.
> y pos 0 = region 1y pos 1 = region 1
> y pos 4 = region 2
> 
> 
> > > +	val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip-
> > > > y2, 4) + 1);
> > > 
> > > +exit:
> > > +	crtc_state->psr2_man_track_ctl = val;
> > > +}
> > > +
> > > +static void clip_area_update(struct drm_rect *overlap_damage_area,
> > > +			     struct drm_rect *damage_area)
> > > +{
> > > +	if (overlap_damage_area->y1 == -1) {
> > > +		overlap_damage_area->y1 = damage_area->y1;
> > > +		overlap_damage_area->y2 = damage_area->y2;
> > > +		return;
> > > +	}
> > > +
> > > +	if (damage_area->y1 < overlap_damage_area->y1)
> > > +		overlap_damage_area->y1 = damage_area->y1;
> > > +
> > > +	if (damage_area->y2 > overlap_damage_area->y2)
> > > +		overlap_damage_area->y2 = damage_area->y2;
> > > +}
> > > +
> > > +int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > +				struct intel_crtc *crtc)
> > >  {
> > >  	struct intel_crtc_state *crtc_state =
> > > intel_atomic_get_new_crtc_state(state, crtc);
> > > +	struct intel_plane_state *new_plane_state, *old_plane_state;
> > > +	struct drm_rect pipe_clip = { .y1 = -1 };
> > > +	struct intel_plane *plane;
> > > +	bool full_update = false;
> > > +	int i, ret;
> > >  
> > >  	if (!crtc_state->enable_psr2_sel_fetch)
> > > -		return;
> > > +		return 0;
> > > +
> > > +	ret = drm_atomic_add_affected_planes(&state->base, &crtc-
> > > > base);
> > > 
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	for_each_oldnew_intel_plane_in_state(state, plane,
> > > old_plane_state,
> > > +					     new_plane_state, i) {
> > > +		struct drm_rect temp;
> > > +
> > > +		if (new_plane_state->uapi.crtc != crtc_state-
> > > > uapi.crtc)
> > > 
> > > +			continue;
> > >  
> > > -	crtc_state->psr2_man_track_ctl = PSR2_MAN_TRK_CTL_ENABLE |
> > > -					 PSR2_MAN_TRK_CTL_SF_SINGLE_FUL
> > > L_FRAME;
> > > +		/*
> > > +		 * TODO: Not clear how to handle planes with negative
> > > position,
> > > +		 * also planes are not updated if they have a negative
> > > X
> > > +		 * position so for now doing a full update in this
> > > cases
> > > +		 */
> > > +		if (new_plane_state->uapi.dst.y1 < 0 ||
> > > +		    new_plane_state->uapi.dst.x1 < 0) {
> > > +			full_update = true;
> > > +			break;
> > > +		}
> > > +
> > > +		if (!new_plane_state->uapi.visible)
> > > +			continue;
> > > +
> > > +		/*
> > > +		 * For now doing a selective fetch in the whole plane
> > > area,
> > > +		 * optimizations will come in the future.
> > > +		 */
> > > +		temp.y1 = new_plane_state->uapi.dst.y1;
> > > +		temp.y2 = new_plane_state->uapi.dst.y2;
> > > +		clip_area_update(&pipe_clip, &temp);
> > > +	}
> > > +
> > > +	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update);
> > > +	return 0;
> > >  }
> > >  
> > >  /**
> > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> > > b/drivers/gpu/drm/i915/display/intel_psr.h
> > > index 6a83c8e682e6..3eca9dcec3c0 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_psr.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> > > @@ -15,6 +15,8 @@ struct intel_crtc_state;
> > >  struct intel_dp;
> > >  struct intel_crtc;
> > >  struct intel_atomic_state;
> > > +struct intel_plane_state;
> > > +struct intel_plane;
> > >  
> > >  #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv-
> > > > psr.sink_support)
> > > 
> > >  void intel_psr_init_dpcd(struct intel_dp *intel_dp);
> > > @@ -45,8 +47,12 @@ void intel_psr_atomic_check(struct drm_connector
> > > *connector,
> > >  			    struct drm_connector_state *old_state,
> > >  			    struct drm_connector_state *new_state);
> > >  void intel_psr_set_force_mode_changed(struct intel_dp *intel_dp);
> > > -void intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > -				 struct intel_crtc *crtc);
> > > +int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > +				struct intel_crtc *crtc);
> > >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > > intel_crtc_state *crtc_state);
> > > +void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> > > +					const struct intel_crtc_state
> > > *crtc_state,
> > > +					const struct intel_plane_state
> > > *plane_state,
> > > +					int color_plane);
> > >  
> > >  #endif /* __INTEL_PSR_H__ */
> > > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > index 63040cb0d4e1..f12425b90607 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > @@ -690,6 +690,9 @@ skl_program_plane(struct intel_plane *plane,
> > >  		intel_de_write_fw(dev_priv, PLANE_AUX_OFFSET(pipe,
> > > plane_id),
> > >  				  (plane_state->color_plane[1].y << 16)
> > > > plane_state->color_plane[1].x);
> > > 
> > >  
> > > +	if (!drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
> > > +		intel_psr2_program_plane_sel_fetch(plane, crtc_state,
> > > plane_state, color_plane);
> > > +
> > >  	/*
> > >  	 * The control register self-arms if the plane was previously
> > >  	 * disabled. Try to make the plane enable atomic by writing
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v3 3/3] drm/i915/display: Program PSR2 selective fetch registers

[Mun, Gwan-gyeong]

On Wed, 2020-09-23 at 10:09 -0700, Souza, Jose wrote:
> On Wed, 2020-09-23 at 10:10 -0700, José Roberto de Souza wrote:
> > On Wed, 2020-09-23 at 14:02 +0100, Mun, Gwan-gyeong wrote:
> > > On Thu, 2020-09-17 at 18:02 -0700, José Roberto de Souza wrote:
> > > > Another step towards PSR2 selective fetch, here programming
> > > > plane
> > > > selective fetch registers and MAN_TRK_CTL enabling selective
> > > > fetch
> > > > but
> > > > for now it is fetching the whole area of the planes.
> > > > The damaged area calculation will come as next and final step.
> > > > 
> > > > v2:
> > > > - removed warn on when no plane is visible in state
> > > > - removed calculations using plane damaged area in
> > > > intel_psr2_program_plane_sel_fetch()
> > > > 
> > > > v3:
> > > > - do not shift 16 positions the plane dst coordinates, only src
> > > > is
> > > > shifted
> > > > 
> > > > BSpec: 55229
> > > > Cc: Gwan-gyeong Mun <
> > > > gwan-gyeong.mun@intel.com
> > > > 
> > > > 
> > > > Cc: Ville Syrjälä <
> > > > ville.syrjala@linux.intel.com
> > > > 
> > > > 
> > > > Signed-off-by: José Roberto de Souza <
> > > > jose.souza@intel.com
> > > > 
> > > > 
> > > > ---
> > > >  drivers/gpu/drm/i915/display/intel_display.c |  10 +-
> > > >  drivers/gpu/drm/i915/display/intel_psr.c     | 120
> > > > ++++++++++++++++++-
> > > >  drivers/gpu/drm/i915/display/intel_psr.h     |  10 +-
> > > >  drivers/gpu/drm/i915/display/intel_sprite.c  |   3 +
> > > >  4 files changed, 134 insertions(+), 9 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index 5a9d933e425a..96bc515497c1 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -11812,6 +11812,9 @@ static void i9xx_update_cursor(struct
> > > > intel_plane *plane,
> > > >  	if (INTEL_GEN(dev_priv) >= 9)
> > > >  		skl_write_cursor_wm(plane, crtc_state);
> > > >  
> > > > +	if (!needs_modeset(crtc_state))
> > > > +		intel_psr2_program_plane_sel_fetch(plane,
> > > > crtc_state,
> > > > plane_state, 0);
> > > > +
> > > >  	if (plane->cursor.base != base ||
> > > >  	    plane->cursor.size != fbc_ctl ||
> > > >  	    plane->cursor.cntl != cntl) {
> > > > @@ -12823,8 +12826,11 @@ static int
> > > > intel_crtc_atomic_check(struct
> > > > intel_atomic_state *state,
> > > >  
> > > >  	}
> > > >  
> > > > -	if (!mode_changed)
> > > > -		intel_psr2_sel_fetch_update(state, crtc);
> > > > +	if (!mode_changed) {
> > > > +		ret = intel_psr2_sel_fetch_update(state, crtc);
> > > > +		if (ret)
> > > > +			return ret;
> > > > +	}
> > > >  
> > > >  	return 0;
> > > >  }
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > > > b/drivers/gpu/drm/i915/display/intel_psr.c
> > > > index 02f74b0ddec1..deb0523f9f29 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > > > @@ -1166,6 +1166,41 @@ static void
> > > > psr_force_hw_tracking_exit(struct
> > > > drm_i915_private *dev_priv)
> > > >  		intel_psr_exit(dev_priv);
> > > >  }
> > > >  
> > > > +void intel_psr2_program_plane_sel_fetch(struct intel_plane
> > > > *plane,
> > > > +					const struct
> > > > intel_crtc_state
> > > > *crtc_state,
> > > > +					const struct
> > > > intel_plane_state
> > > > *plane_state,
> > > > +					int color_plane)
> > > > +{
> > > > +	struct drm_i915_private *dev_priv = to_i915(plane-
> > > > >base.dev);
> > > > +	enum pipe pipe = plane->pipe;
> > > > +	u32 val;
> > > > +
> > > > +	if (!crtc_state->enable_psr2_sel_fetch)
> > > > +		return;
> > > > +
> > > > +	/*
> > > > +	 * skl_plane_ctl_crtc()/i9xx_cursor_ctl_crtc() return 0
> > > > for
> > > > gen11+, so
> > > > +	 * plane_state->ctl is the right value
> > > > +	 */
> > > > +	val = plane_state ? plane_state->ctl : 0;
> > > 
> > > IMHO, skl_plane_ctl() might set other ctl bits, it would be
> > > better to
> > > have separated ctl bit value for "selective fetch ctl".
> > 
> > Like said all other bits are spares so can be set without issues
> > but okay will a "plane_state->ctl & PLANE_SEL_FETCH_CTL_ENABLE".
> 
> Please take a look to the answer of your other comment bellow, with
> the change above can I have your rv-b?

The purpose and composition of bits of Register_SEL_FETCH_PLANE_CTL is
different from Register_PLANE_CTL.
And the Spares bits of Register_SEL_FETCH_PLANE_CTL might be used for
other purpose.
(And we current don't know the side effect of setting of Spares bit of
Register_SEL_FETCH_PLANE_CTL )
therefor I recommend "Read and Modify" to SEL_FETCH_PLANE_CTL.
> 
> > > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe,
> > > > plane-
> > > > > id), val);
> > > > 
> > > > +	if (!val || plane->id == PLANE_CURSOR)
> > > > +		return;
> > > > +
> > > > +	val = plane_state->uapi.dst.y1 << 16 | plane_state-
> > > > > uapi.dst.x1;
> > > > 
> > > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe,
> > > > plane-
> > > > > id), val);
> > > > 
> > > > +
> > > > +	val = plane_state->color_plane[color_plane].y << 16;
> > > > +	val |= plane_state->color_plane[color_plane].x;
> > > > +	intel_de_write_fw(dev_priv,
> > > > PLANE_SEL_FETCH_OFFSET(pipe, plane-
> > > > > id),
> > > > 
> > > > +			  val);
> > > > +
> > > > +	/* Sizes are 0 based */
> > > > +	val = ((drm_rect_height(&plane_state->uapi.src) >> 16)
> > > > - 1) <<
> > > > 16;
> > > > +	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) -
> > > > 1;
> > > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe,
> > > > plane-
> > > > > id), val);
> > > > 
> > > > +}
> > > > +
> > > >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > > > intel_crtc_state *crtc_state)
> > > >  {
> > > >  	struct intel_crtc *crtc = to_intel_crtc(crtc_state-
> > > > >uapi.crtc);
> > > > @@ -1180,16 +1215,91 @@ void
> > > > intel_psr2_program_trans_man_trk_ctl(const struct
> > > > intel_crtc_state
> > > > *crtc_st
> > > >  		       crtc_state->psr2_man_track_ctl);
> > > >  }
> > > >  
> > > > -void intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > *state,
> > > > -				 struct intel_crtc *crtc)
> > > > +static void psr2_man_trk_ctl_calc(struct intel_crtc_state
> > > > *crtc_state,
> > > > +				  struct drm_rect *clip, bool
> > > > full_update)
> > > > +{
> > > > +	u32 val = PSR2_MAN_TRK_CTL_ENABLE;
> > > > +
> > > > +	if (full_update) {
> > > > +		val |= PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
> > > > +		goto exit;
> > > > +	}
> > > > +
> > > > +	if (clip->y1 == -1)
> > > > +		goto exit;
> > > > +
> > > > +	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
> > > > +	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 /
> > > > 4 + 1);
> > > 
> > > I think the start address block would be like this too.
> > > PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(DIV_ROUND_UP(clip->y1 ,
> > > 4));
> > 
> > This would not match for numbers that divide by 4.
> > y pos 0 = region 1y pos 1 = region 1
> > y pos 4 = region 2
> > 
yes. you are right.
> > 
> > > > +	val |=
> > > > PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip-
> > > > > y2, 4) + 1);
> > > > 
> > > > +exit:
> > > > +	crtc_state->psr2_man_track_ctl = val;
> > > > +}
> > > > +
> > > > +static void clip_area_update(struct drm_rect
> > > > *overlap_damage_area,
> > > > +			     struct drm_rect *damage_area)
> > > > +{
> > > > +	if (overlap_damage_area->y1 == -1) {
> > > > +		overlap_damage_area->y1 = damage_area->y1;
> > > > +		overlap_damage_area->y2 = damage_area->y2;
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	if (damage_area->y1 < overlap_damage_area->y1)
> > > > +		overlap_damage_area->y1 = damage_area->y1;
> > > > +
> > > > +	if (damage_area->y2 > overlap_damage_area->y2)
> > > > +		overlap_damage_area->y2 = damage_area->y2;
> > > > +}
> > > > +
> > > > +int intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > *state,
> > > > +				struct intel_crtc *crtc)
> > > >  {
> > > >  	struct intel_crtc_state *crtc_state =
> > > > intel_atomic_get_new_crtc_state(state, crtc);
> > > > +	struct intel_plane_state *new_plane_state,
> > > > *old_plane_state;
> > > > +	struct drm_rect pipe_clip = { .y1 = -1 };
> > > > +	struct intel_plane *plane;
> > > > +	bool full_update = false;
> > > > +	int i, ret;
> > > >  
> > > >  	if (!crtc_state->enable_psr2_sel_fetch)
> > > > -		return;
> > > > +		return 0;
> > > > +
> > > > +	ret = drm_atomic_add_affected_planes(&state->base,
> > > > &crtc-
> > > > > base);
> > > > 
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	for_each_oldnew_intel_plane_in_state(state, plane,
> > > > old_plane_state,
> > > > +					     new_plane_state,
> > > > i) {
> > > > +		struct drm_rect temp;
> > > > +
> > > > +		if (new_plane_state->uapi.crtc != crtc_state-
> > > > > uapi.crtc)
> > > > 
> > > > +			continue;
> > > >  
> > > > -	crtc_state->psr2_man_track_ctl =
> > > > PSR2_MAN_TRK_CTL_ENABLE |
> > > > -					 PSR2_MAN_TRK_CTL_SF_SI
> > > > NGLE_FUL
> > > > L_FRAME;
> > > > +		/*
> > > > +		 * TODO: Not clear how to handle planes with
> > > > negative
> > > > position,
> > > > +		 * also planes are not updated if they have a
> > > > negative
> > > > X
> > > > +		 * position so for now doing a full update in
> > > > this
> > > > cases
> > > > +		 */
> > > > +		if (new_plane_state->uapi.dst.y1 < 0 ||
> > > > +		    new_plane_state->uapi.dst.x1 < 0) {
> > > > +			full_update = true;
> > > > +			break;
> > > > +		}
> > > > +
> > > > +		if (!new_plane_state->uapi.visible)
> > > > +			continue;
> > > > +
> > > > +		/*
> > > > +		 * For now doing a selective fetch in the whole
> > > > plane
> > > > area,
> > > > +		 * optimizations will come in the future.
> > > > +		 */
> > > > +		temp.y1 = new_plane_state->uapi.dst.y1;
> > > > +		temp.y2 = new_plane_state->uapi.dst.y2;
> > > > +		clip_area_update(&pipe_clip, &temp);
> > > > +	}
> > > > +
> > > > +	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip,
> > > > full_update);
> > > > +	return 0;
> > > >  }
> > > >  
> > > >  /**
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> > > > b/drivers/gpu/drm/i915/display/intel_psr.h
> > > > index 6a83c8e682e6..3eca9dcec3c0 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_psr.h
> > > > +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> > > > @@ -15,6 +15,8 @@ struct intel_crtc_state;
> > > >  struct intel_dp;
> > > >  struct intel_crtc;
> > > >  struct intel_atomic_state;
> > > > +struct intel_plane_state;
> > > > +struct intel_plane;
> > > >  
> > > >  #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv-
> > > > > psr.sink_support)
> > > > 
> > > >  void intel_psr_init_dpcd(struct intel_dp *intel_dp);
> > > > @@ -45,8 +47,12 @@ void intel_psr_atomic_check(struct
> > > > drm_connector
> > > > *connector,
> > > >  			    struct drm_connector_state
> > > > *old_state,
> > > >  			    struct drm_connector_state
> > > > *new_state);
> > > >  void intel_psr_set_force_mode_changed(struct intel_dp
> > > > *intel_dp);
> > > > -void intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > *state,
> > > > -				 struct intel_crtc *crtc);
> > > > +int intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > *state,
> > > > +				struct intel_crtc *crtc);
> > > >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > > > intel_crtc_state *crtc_state);
> > > > +void intel_psr2_program_plane_sel_fetch(struct intel_plane
> > > > *plane,
> > > > +					const struct
> > > > intel_crtc_state
> > > > *crtc_state,
> > > > +					const struct
> > > > intel_plane_state
> > > > *plane_state,
> > > > +					int color_plane);
> > > >  
> > > >  #endif /* __INTEL_PSR_H__ */
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > index 63040cb0d4e1..f12425b90607 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > @@ -690,6 +690,9 @@ skl_program_plane(struct intel_plane
> > > > *plane,
> > > >  		intel_de_write_fw(dev_priv,
> > > > PLANE_AUX_OFFSET(pipe,
> > > > plane_id),
> > > >  				  (plane_state-
> > > > >color_plane[1].y << 16)
> > > > > plane_state->color_plane[1].x);
> > > > 
> > > >  
> > > > +	if (!drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
> > > > +		intel_psr2_program_plane_sel_fetch(plane,
> > > > crtc_state,
> > > > plane_state, color_plane);
> > > > +
> > > >  	/*
> > > >  	 * The control register self-arms if the plane was
> > > > previously
> > > >  	 * disabled. Try to make the plane enable atomic by
> > > > writing
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v3 3/3] drm/i915/display: Program PSR2 selective fetch registers

[Souza, Jose]

On Thu, 2020-09-24 at 14:27 +0100, Mun, Gwan-gyeong wrote:
> On Wed, 2020-09-23 at 10:09 -0700, Souza, Jose wrote:
> > On Wed, 2020-09-23 at 10:10 -0700, José Roberto de Souza wrote:
> > > On Wed, 2020-09-23 at 14:02 +0100, Mun, Gwan-gyeong wrote:
> > > > On Thu, 2020-09-17 at 18:02 -0700, José Roberto de Souza wrote:
> > > > > Another step towards PSR2 selective fetch, here programming
> > > > > plane
> > > > > selective fetch registers and MAN_TRK_CTL enabling selective
> > > > > fetch
> > > > > but
> > > > > for now it is fetching the whole area of the planes.
> > > > > The damaged area calculation will come as next and final step.
> > > > > 
> > > > > v2:
> > > > > - removed warn on when no plane is visible in state
> > > > > - removed calculations using plane damaged area in
> > > > > intel_psr2_program_plane_sel_fetch()
> > > > > 
> > > > > v3:
> > > > > - do not shift 16 positions the plane dst coordinates, only src
> > > > > is
> > > > > shifted
> > > > > 
> > > > > BSpec: 55229
> > > > > Cc: Gwan-gyeong Mun <
> > > > > gwan-gyeong.mun@intel.com
> > > > > 
> > > > > 
> > > > > 
> > > > > Cc: Ville Syrjälä <
> > > > > ville.syrjala@linux.intel.com
> > > > > 
> > > > > 
> > > > > 
> > > > > Signed-off-by: José Roberto de Souza <
> > > > > jose.souza@intel.com
> > > > > 
> > > > > 
> > > > > 
> > > > > ---
> > > > >  drivers/gpu/drm/i915/display/intel_display.c |  10 +-
> > > > >  drivers/gpu/drm/i915/display/intel_psr.c     | 120
> > > > > ++++++++++++++++++-
> > > > >  drivers/gpu/drm/i915/display/intel_psr.h     |  10 +-
> > > > >  drivers/gpu/drm/i915/display/intel_sprite.c  |   3 +
> > > > >  4 files changed, 134 insertions(+), 9 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > index 5a9d933e425a..96bc515497c1 100644
> > > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > @@ -11812,6 +11812,9 @@ static void i9xx_update_cursor(struct
> > > > > intel_plane *plane,
> > > > >  	if (INTEL_GEN(dev_priv) >= 9)
> > > > >  		skl_write_cursor_wm(plane, crtc_state);
> > > > >  
> > > > > +	if (!needs_modeset(crtc_state))
> > > > > +		intel_psr2_program_plane_sel_fetch(plane,
> > > > > crtc_state,
> > > > > plane_state, 0);
> > > > > +
> > > > >  	if (plane->cursor.base != base ||
> > > > >  	    plane->cursor.size != fbc_ctl ||
> > > > >  	    plane->cursor.cntl != cntl) {
> > > > > @@ -12823,8 +12826,11 @@ static int
> > > > > intel_crtc_atomic_check(struct
> > > > > intel_atomic_state *state,
> > > > >  
> > > > >  	}
> > > > >  
> > > > > -	if (!mode_changed)
> > > > > -		intel_psr2_sel_fetch_update(state, crtc);
> > > > > +	if (!mode_changed) {
> > > > > +		ret = intel_psr2_sel_fetch_update(state, crtc);
> > > > > +		if (ret)
> > > > > +			return ret;
> > > > > +	}
> > > > >  
> > > > >  	return 0;
> > > > >  }
> > > > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > > > > b/drivers/gpu/drm/i915/display/intel_psr.c
> > > > > index 02f74b0ddec1..deb0523f9f29 100644
> > > > > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > > > > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > > > > @@ -1166,6 +1166,41 @@ static void
> > > > > psr_force_hw_tracking_exit(struct
> > > > > drm_i915_private *dev_priv)
> > > > >  		intel_psr_exit(dev_priv);
> > > > >  }
> > > > >  
> > > > > +void intel_psr2_program_plane_sel_fetch(struct intel_plane
> > > > > *plane,
> > > > > +					const struct
> > > > > intel_crtc_state
> > > > > *crtc_state,
> > > > > +					const struct
> > > > > intel_plane_state
> > > > > *plane_state,
> > > > > +					int color_plane)
> > > > > +{
> > > > > +	struct drm_i915_private *dev_priv = to_i915(plane-
> > > > > > base.dev);
> > > > > 
> > > > > +	enum pipe pipe = plane->pipe;
> > > > > +	u32 val;
> > > > > +
> > > > > +	if (!crtc_state->enable_psr2_sel_fetch)
> > > > > +		return;
> > > > > +
> > > > > +	/*
> > > > > +	 * skl_plane_ctl_crtc()/i9xx_cursor_ctl_crtc() return 0
> > > > > for
> > > > > gen11+, so
> > > > > +	 * plane_state->ctl is the right value
> > > > > +	 */
> > > > > +	val = plane_state ? plane_state->ctl : 0;
> > > > 
> > > > IMHO, skl_plane_ctl() might set other ctl bits, it would be
> > > > better to
> > > > have separated ctl bit value for "selective fetch ctl".
> > > 
> > > Like said all other bits are spares so can be set without issues
> > > but okay will a "plane_state->ctl & PLANE_SEL_FETCH_CTL_ENABLE".
> > 
> > Please take a look to the answer of your other comment bellow, with
> > the change above can I have your rv-b?
> 
> The purpose and composition of bits of Register_SEL_FETCH_PLANE_CTL is
> different from Register_PLANE_CTL.
> And the Spares bits of Register_SEL_FETCH_PLANE_CTL might be used for
> other purpose.
> (And we current don't know the side effect of setting of Spares bit of
> Register_SEL_FETCH_PLANE_CTL )
> therefor I recommend "Read and Modify" to SEL_FETCH_PLANE_CTL.

Ah just remembered why I was using doing this, for cursor the bits that needs to be set is the first 5 bits.
Anyways masking out other bits in v4.


> > > > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_CTL(pipe,
> > > > > plane-
> > > > > > id), val);
> > > > > 
> > > > > +	if (!val || plane->id == PLANE_CURSOR)
> > > > > +		return;
> > > > > +
> > > > > +	val = plane_state->uapi.dst.y1 << 16 | plane_state-
> > > > > > uapi.dst.x1;
> > > > > 
> > > > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe,
> > > > > plane-
> > > > > > id), val);
> > > > > 
> > > > > +
> > > > > +	val = plane_state->color_plane[color_plane].y << 16;
> > > > > +	val |= plane_state->color_plane[color_plane].x;
> > > > > +	intel_de_write_fw(dev_priv,
> > > > > PLANE_SEL_FETCH_OFFSET(pipe, plane-
> > > > > > id),
> > > > > 
> > > > > +			  val);
> > > > > +
> > > > > +	/* Sizes are 0 based */
> > > > > +	val = ((drm_rect_height(&plane_state->uapi.src) >> 16)
> > > > > - 1) <<
> > > > > 16;
> > > > > +	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) -
> > > > > 1;
> > > > > +	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe,
> > > > > plane-
> > > > > > id), val);
> > > > > 
> > > > > +}
> > > > > +
> > > > >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > > > > intel_crtc_state *crtc_state)
> > > > >  {
> > > > >  	struct intel_crtc *crtc = to_intel_crtc(crtc_state-
> > > > > > uapi.crtc);
> > > > > 
> > > > > @@ -1180,16 +1215,91 @@ void
> > > > > intel_psr2_program_trans_man_trk_ctl(const struct
> > > > > intel_crtc_state
> > > > > *crtc_st
> > > > >  		       crtc_state->psr2_man_track_ctl);
> > > > >  }
> > > > >  
> > > > > -void intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > > *state,
> > > > > -				 struct intel_crtc *crtc)
> > > > > +static void psr2_man_trk_ctl_calc(struct intel_crtc_state
> > > > > *crtc_state,
> > > > > +				  struct drm_rect *clip, bool
> > > > > full_update)
> > > > > +{
> > > > > +	u32 val = PSR2_MAN_TRK_CTL_ENABLE;
> > > > > +
> > > > > +	if (full_update) {
> > > > > +		val |= PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME;
> > > > > +		goto exit;
> > > > > +	}
> > > > > +
> > > > > +	if (clip->y1 == -1)
> > > > > +		goto exit;
> > > > > +
> > > > > +	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
> > > > > +	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 /
> > > > > 4 + 1);
> > > > 
> > > > I think the start address block would be like this too.
> > > > PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(DIV_ROUND_UP(clip->y1 ,
> > > > 4));
> > > 
> > > This would not match for numbers that divide by 4.
> > > y pos 0 = region 1y pos 1 = region 1
> > > y pos 4 = region 2
> > > 
> 
> yes. you are right.
> > > > > +	val |=
> > > > > PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip-
> > > > > > y2, 4) + 1);
> > > > > 
> > > > > +exit:
> > > > > +	crtc_state->psr2_man_track_ctl = val;
> > > > > +}
> > > > > +
> > > > > +static void clip_area_update(struct drm_rect
> > > > > *overlap_damage_area,
> > > > > +			     struct drm_rect *damage_area)
> > > > > +{
> > > > > +	if (overlap_damage_area->y1 == -1) {
> > > > > +		overlap_damage_area->y1 = damage_area->y1;
> > > > > +		overlap_damage_area->y2 = damage_area->y2;
> > > > > +		return;
> > > > > +	}
> > > > > +
> > > > > +	if (damage_area->y1 < overlap_damage_area->y1)
> > > > > +		overlap_damage_area->y1 = damage_area->y1;
> > > > > +
> > > > > +	if (damage_area->y2 > overlap_damage_area->y2)
> > > > > +		overlap_damage_area->y2 = damage_area->y2;
> > > > > +}
> > > > > +
> > > > > +int intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > > *state,
> > > > > +				struct intel_crtc *crtc)
> > > > >  {
> > > > >  	struct intel_crtc_state *crtc_state =
> > > > > intel_atomic_get_new_crtc_state(state, crtc);
> > > > > +	struct intel_plane_state *new_plane_state,
> > > > > *old_plane_state;
> > > > > +	struct drm_rect pipe_clip = { .y1 = -1 };
> > > > > +	struct intel_plane *plane;
> > > > > +	bool full_update = false;
> > > > > +	int i, ret;
> > > > >  
> > > > >  	if (!crtc_state->enable_psr2_sel_fetch)
> > > > > -		return;
> > > > > +		return 0;
> > > > > +
> > > > > +	ret = drm_atomic_add_affected_planes(&state->base,
> > > > > &crtc-
> > > > > > base);
> > > > > 
> > > > > +	if (ret)
> > > > > +		return ret;
> > > > > +
> > > > > +	for_each_oldnew_intel_plane_in_state(state, plane,
> > > > > old_plane_state,
> > > > > +					     new_plane_state,
> > > > > i) {
> > > > > +		struct drm_rect temp;
> > > > > +
> > > > > +		if (new_plane_state->uapi.crtc != crtc_state-
> > > > > > uapi.crtc)
> > > > > 
> > > > > +			continue;
> > > > >  
> > > > > -	crtc_state->psr2_man_track_ctl =
> > > > > PSR2_MAN_TRK_CTL_ENABLE |
> > > > > -					 PSR2_MAN_TRK_CTL_SF_SI
> > > > > NGLE_FUL
> > > > > L_FRAME;
> > > > > +		/*
> > > > > +		 * TODO: Not clear how to handle planes with
> > > > > negative
> > > > > position,
> > > > > +		 * also planes are not updated if they have a
> > > > > negative
> > > > > X
> > > > > +		 * position so for now doing a full update in
> > > > > this
> > > > > cases
> > > > > +		 */
> > > > > +		if (new_plane_state->uapi.dst.y1 < 0 ||
> > > > > +		    new_plane_state->uapi.dst.x1 < 0) {
> > > > > +			full_update = true;
> > > > > +			break;
> > > > > +		}
> > > > > +
> > > > > +		if (!new_plane_state->uapi.visible)
> > > > > +			continue;
> > > > > +
> > > > > +		/*
> > > > > +		 * For now doing a selective fetch in the whole
> > > > > plane
> > > > > area,
> > > > > +		 * optimizations will come in the future.
> > > > > +		 */
> > > > > +		temp.y1 = new_plane_state->uapi.dst.y1;
> > > > > +		temp.y2 = new_plane_state->uapi.dst.y2;
> > > > > +		clip_area_update(&pipe_clip, &temp);
> > > > > +	}
> > > > > +
> > > > > +	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip,
> > > > > full_update);
> > > > > +	return 0;
> > > > >  }
> > > > >  
> > > > >  /**
> > > > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> > > > > b/drivers/gpu/drm/i915/display/intel_psr.h
> > > > > index 6a83c8e682e6..3eca9dcec3c0 100644
> > > > > --- a/drivers/gpu/drm/i915/display/intel_psr.h
> > > > > +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> > > > > @@ -15,6 +15,8 @@ struct intel_crtc_state;
> > > > >  struct intel_dp;
> > > > >  struct intel_crtc;
> > > > >  struct intel_atomic_state;
> > > > > +struct intel_plane_state;
> > > > > +struct intel_plane;
> > > > >  
> > > > >  #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv-
> > > > > > psr.sink_support)
> > > > > 
> > > > >  void intel_psr_init_dpcd(struct intel_dp *intel_dp);
> > > > > @@ -45,8 +47,12 @@ void intel_psr_atomic_check(struct
> > > > > drm_connector
> > > > > *connector,
> > > > >  			    struct drm_connector_state
> > > > > *old_state,
> > > > >  			    struct drm_connector_state
> > > > > *new_state);
> > > > >  void intel_psr_set_force_mode_changed(struct intel_dp
> > > > > *intel_dp);
> > > > > -void intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > > *state,
> > > > > -				 struct intel_crtc *crtc);
> > > > > +int intel_psr2_sel_fetch_update(struct intel_atomic_state
> > > > > *state,
> > > > > +				struct intel_crtc *crtc);
> > > > >  void intel_psr2_program_trans_man_trk_ctl(const struct
> > > > > intel_crtc_state *crtc_state);
> > > > > +void intel_psr2_program_plane_sel_fetch(struct intel_plane
> > > > > *plane,
> > > > > +					const struct
> > > > > intel_crtc_state
> > > > > *crtc_state,
> > > > > +					const struct
> > > > > intel_plane_state
> > > > > *plane_state,
> > > > > +					int color_plane);
> > > > >  
> > > > >  #endif /* __INTEL_PSR_H__ */
> > > > > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > > b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > > index 63040cb0d4e1..f12425b90607 100644
> > > > > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > > > @@ -690,6 +690,9 @@ skl_program_plane(struct intel_plane
> > > > > *plane,
> > > > >  		intel_de_write_fw(dev_priv,
> > > > > PLANE_AUX_OFFSET(pipe,
> > > > > plane_id),
> > > > >  				  (plane_state-
> > > > > > color_plane[1].y << 16)
> > > > > > plane_state->color_plane[1].x);
> > > > > 
> > > > >  
> > > > > +	if (!drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
> > > > > +		intel_psr2_program_plane_sel_fetch(plane,
> > > > > crtc_state,
> > > > > plane_state, color_plane);
> > > > > +
> > > > >  	/*
> > > > >  	 * The control register self-arms if the plane was
> > > > > previously
> > > > >  	 * disabled. Try to make the plane enable atomic by
> > > > > writing
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 8448 bytes --]

== Series Details ==

Series: series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch
URL   : https://patchwork.freedesktop.org/series/81824/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9023 -> Patchwork_18525
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/index.html

Known issues
------------

  Here are the changes found in Patchwork_18525 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_flink_basic@basic:
    - fi-tgl-y:           [PASS][1] -> [DMESG-WARN][2] ([i915#402]) +1 similar issue
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-tgl-y/igt@gem_flink_basic@basic.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-tgl-y/igt@gem_flink_basic@basic.html

  * igt@kms_cursor_legacy@basic-flip-after-cursor-atomic:
    - fi-icl-u2:          [PASS][3] -> [DMESG-WARN][4] ([i915#1982]) +1 similar issue
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-icl-u2/igt@kms_cursor_legacy@basic-flip-after-cursor-atomic.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-icl-u2/igt@kms_cursor_legacy@basic-flip-after-cursor-atomic.html

  * igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2:
    - fi-skl-guc:         [PASS][5] -> [DMESG-WARN][6] ([i915#2203])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-skl-guc/igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-skl-guc/igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2.html

  
#### Possible fixes ####

  * igt@gem_flink_basic@flink-lifetime:
    - fi-tgl-y:           [DMESG-WARN][7] ([i915#402]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-tgl-y/igt@gem_flink_basic@flink-lifetime.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-tgl-y/igt@gem_flink_basic@flink-lifetime.html

  * igt@kms_busy@basic@flip:
    - fi-kbl-x1275:       [DMESG-WARN][9] ([i915#62] / [i915#92] / [i915#95]) -> [PASS][10]
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-kbl-x1275/igt@kms_busy@basic@flip.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-kbl-x1275/igt@kms_busy@basic@flip.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
    - fi-bsw-n3050:       [DMESG-WARN][11] ([i915#1982]) -> [PASS][12] +1 similar issue
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-bsw-n3050/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-bsw-n3050/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html
    - fi-bsw-kefka:       [DMESG-WARN][13] ([i915#1982]) -> [PASS][14] +1 similar issue
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html

  * igt@kms_flip@basic-flip-vs-wf_vblank@b-edp1:
    - fi-icl-u2:          [DMESG-WARN][15] ([i915#1982]) -> [PASS][16] +1 similar issue
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-icl-u2/igt@kms_flip@basic-flip-vs-wf_vblank@b-edp1.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-icl-u2/igt@kms_flip@basic-flip-vs-wf_vblank@b-edp1.html

  * igt@kms_pipe_crc_basic@read-crc-pipe-c:
    - fi-tgl-y:           [DMESG-WARN][17] ([i915#1982]) -> [PASS][18] +1 similar issue
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-tgl-y/igt@kms_pipe_crc_basic@read-crc-pipe-c.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-tgl-y/igt@kms_pipe_crc_basic@read-crc-pipe-c.html

  * igt@vgem_basic@unload:
    - fi-skl-guc:         [DMESG-WARN][19] ([i915#2203]) -> [PASS][20]
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-skl-guc/igt@vgem_basic@unload.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-skl-guc/igt@vgem_basic@unload.html

  
#### Warnings ####

  * igt@gem_exec_suspend@basic-s0:
    - fi-kbl-x1275:       [DMESG-WARN][21] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][22] ([i915#1982] / [i915#62] / [i915#92] / [i915#95])
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-kbl-x1275/igt@gem_exec_suspend@basic-s0.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-kbl-x1275/igt@gem_exec_suspend@basic-s0.html

  * igt@i915_pm_rpm@module-reload:
    - fi-tgl-y:           [DMESG-WARN][23] ([i915#2411]) -> [DMESG-WARN][24] ([i915#1982] / [i915#2411]) +1 similar issue
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-tgl-y/igt@i915_pm_rpm@module-reload.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-tgl-y/igt@i915_pm_rpm@module-reload.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
    - fi-kbl-x1275:       [DMESG-WARN][25] ([i915#62] / [i915#92]) -> [DMESG-WARN][26] ([i915#62] / [i915#92] / [i915#95]) +3 similar issues
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-kbl-x1275/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-kbl-x1275/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy.html

  * igt@kms_force_connector_basic@force-edid:
    - fi-kbl-x1275:       [DMESG-WARN][27] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][28] ([i915#62] / [i915#92]) +3 similar issues
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-kbl-x1275/igt@kms_force_connector_basic@force-edid.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-kbl-x1275/igt@kms_force_connector_basic@force-edid.html

  * igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
    - fi-kbl-x1275:       [DMESG-WARN][29] ([i915#62] / [i915#92]) -> [DMESG-WARN][30] ([i915#1982] / [i915#62] / [i915#92] / [i915#95])
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-kbl-x1275/igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-kbl-x1275/igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a.html

  * igt@vgem_basic@unload:
    - fi-kbl-x1275:       [DMESG-WARN][31] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][32] ([i915#95])
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/fi-kbl-x1275/igt@vgem_basic@unload.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/fi-kbl-x1275/igt@vgem_basic@unload.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
  [i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
  [i915#289]: https://gitlab.freedesktop.org/drm/intel/issues/289
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
  [i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
  [i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
  [i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95


Participating hosts (46 -> 40)
------------------------------

  Missing    (6): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_9023 -> Patchwork_18525

  CI-20190529: 20190529
  CI_DRM_9023: 5887fa2d8b9b7f6a278f9a1bc8642cb9d5d0279a @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5787: 0ec962017c8131de14e0cb038f7f76b1f17ed637 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_18525: 224cc64f164cdd7cddd175fa494c4cd7581859f1 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

224cc64f164c drm/i915/display: Program PSR2 selective fetch registers
f0590dd9fa41 drm/i915/display: Check PSR parameter and flag only in state compute phase
d0e43279acc8 drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/index.html

[-- Attachment #1.2: Type: text/html, Size: 11658 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 16303 bytes --]

== Series Details ==

Series: series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch
URL   : https://patchwork.freedesktop.org/series/81824/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_9023_full -> Patchwork_18525_full
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_18525_full absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_18525_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_18525_full:

### IGT changes ###

#### Possible regressions ####

  * igt@kms_cursor_crc@pipe-c-cursor-128x42-onscreen:
    - shard-hsw:          [PASS][1] -> [INCOMPLETE][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-hsw2/igt@kms_cursor_crc@pipe-c-cursor-128x42-onscreen.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-hsw2/igt@kms_cursor_crc@pipe-c-cursor-128x42-onscreen.html

  
Known issues
------------

  Here are the changes found in Patchwork_18525_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_exec_whisper@basic-fds-forked-all:
    - shard-glk:          [PASS][3] -> [DMESG-WARN][4] ([i915#118] / [i915#95]) +1 similar issue
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-glk8/igt@gem_exec_whisper@basic-fds-forked-all.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-glk3/igt@gem_exec_whisper@basic-fds-forked-all.html

  * igt@gem_userptr_blits@sync-unmap-cycles:
    - shard-skl:          [PASS][5] -> [TIMEOUT][6] ([i915#1958] / [i915#2424])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl2/igt@gem_userptr_blits@sync-unmap-cycles.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl7/igt@gem_userptr_blits@sync-unmap-cycles.html

  * igt@i915_module_load@reload:
    - shard-tglb:         [PASS][7] -> [DMESG-WARN][8] ([i915#1982]) +3 similar issues
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-tglb2/igt@i915_module_load@reload.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-tglb2/igt@i915_module_load@reload.html

  * igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
    - shard-hsw:          [PASS][9] -> [FAIL][10] ([i915#96])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-hsw4/igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-hsw8/igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
    - shard-skl:          [PASS][11] -> [DMESG-WARN][12] ([i915#1982]) +3 similar issues
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl5/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl3/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html

  * igt@kms_flip@2x-wf_vblank-ts-check-interruptible@ab-vga1-hdmi-a1:
    - shard-hsw:          [PASS][13] -> [DMESG-WARN][14] ([i915#1982])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-hsw6/igt@kms_flip@2x-wf_vblank-ts-check-interruptible@ab-vga1-hdmi-a1.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-hsw6/igt@kms_flip@2x-wf_vblank-ts-check-interruptible@ab-vga1-hdmi-a1.html

  * igt@kms_flip@flip-vs-suspend@b-dp1:
    - shard-kbl:          [PASS][15] -> [DMESG-WARN][16] ([i915#180]) +1 similar issue
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-kbl3/igt@kms_flip@flip-vs-suspend@b-dp1.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-kbl2/igt@kms_flip@flip-vs-suspend@b-dp1.html

  * igt@kms_flip@plain-flip-fb-recreate-interruptible@a-edp1:
    - shard-skl:          [PASS][17] -> [FAIL][18] ([i915#2122])
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl4/igt@kms_flip@plain-flip-fb-recreate-interruptible@a-edp1.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl3/igt@kms_flip@plain-flip-fb-recreate-interruptible@a-edp1.html

  * igt@kms_hdr@bpc-switch-suspend:
    - shard-skl:          [PASS][19] -> [FAIL][20] ([i915#1188]) +1 similar issue
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl8/igt@kms_hdr@bpc-switch-suspend.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl1/igt@kms_hdr@bpc-switch-suspend.html

  * igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
    - shard-skl:          [PASS][21] -> [FAIL][22] ([fdo#108145] / [i915#265])
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl5/igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl4/igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min.html

  * igt@kms_psr@psr2_cursor_render:
    - shard-iclb:         [PASS][23] -> [SKIP][24] ([fdo#109441]) +3 similar issues
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-iclb6/igt@kms_psr@psr2_cursor_render.html

  * igt@kms_vblank@pipe-a-ts-continuation-suspend:
    - shard-skl:          [PASS][25] -> [INCOMPLETE][26] ([i915#198])
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl5/igt@kms_vblank@pipe-a-ts-continuation-suspend.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl4/igt@kms_vblank@pipe-a-ts-continuation-suspend.html

  * igt@kms_vblank@pipe-b-query-busy:
    - shard-apl:          [PASS][27] -> [DMESG-WARN][28] ([i915#1635] / [i915#1982]) +1 similar issue
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-apl6/igt@kms_vblank@pipe-b-query-busy.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-apl8/igt@kms_vblank@pipe-b-query-busy.html

  * igt@prime_vgem@sync@bcs0:
    - shard-tglb:         [PASS][29] -> [INCOMPLETE][30] ([i915#409])
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-tglb1/igt@prime_vgem@sync@bcs0.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-tglb6/igt@prime_vgem@sync@bcs0.html

  
#### Possible fixes ####

  * {igt@core_hotunplug@hotunbind-rebind}:
    - shard-iclb:         [DMESG-WARN][31] ([i915#1982]) -> [PASS][32]
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-iclb1/igt@core_hotunplug@hotunbind-rebind.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-iclb7/igt@core_hotunplug@hotunbind-rebind.html

  * igt@gem_ctx_isolation@preservation-s3@vecs0:
    - shard-skl:          [INCOMPLETE][33] ([i915#198]) -> [PASS][34]
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl3/igt@gem_ctx_isolation@preservation-s3@vecs0.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl8/igt@gem_ctx_isolation@preservation-s3@vecs0.html

  * igt@gem_ctx_param@vm:
    - shard-skl:          [DMESG-WARN][35] ([i915#1982]) -> [PASS][36] +6 similar issues
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl7/igt@gem_ctx_param@vm.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl8/igt@gem_ctx_param@vm.html

  * igt@gem_userptr_blits@unsync-unmap-cycles:
    - shard-skl:          [TIMEOUT][37] ([i915#1958]) -> [PASS][38]
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl9/igt@gem_userptr_blits@unsync-unmap-cycles.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl7/igt@gem_userptr_blits@unsync-unmap-cycles.html

  * igt@i915_pm_dc@dc6-psr:
    - shard-iclb:         [FAIL][39] ([i915#1899]) -> [PASS][40]
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-iclb1/igt@i915_pm_dc@dc6-psr.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-iclb1/igt@i915_pm_dc@dc6-psr.html

  * igt@kms_cursor_legacy@2x-cursor-vs-flip-atomic:
    - shard-hsw:          [INCOMPLETE][41] ([CI#80]) -> [PASS][42]
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-hsw2/igt@kms_cursor_legacy@2x-cursor-vs-flip-atomic.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-hsw2/igt@kms_cursor_legacy@2x-cursor-vs-flip-atomic.html

  * igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy:
    - shard-hsw:          [FAIL][43] ([i915#96]) -> [PASS][44]
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-hsw8/igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-hsw5/igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy.html

  * igt@kms_flip@2x-dpms-vs-vblank-race@ab-vga1-hdmi-a1:
    - shard-hsw:          [DMESG-WARN][45] ([i915#1982]) -> [PASS][46]
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-hsw6/igt@kms_flip@2x-dpms-vs-vblank-race@ab-vga1-hdmi-a1.html
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-hsw7/igt@kms_flip@2x-dpms-vs-vblank-race@ab-vga1-hdmi-a1.html

  * igt@kms_flip@2x-plain-flip-fb-recreate-interruptible@ab-hdmi-a1-hdmi-a2:
    - shard-glk:          [FAIL][47] ([i915#2122]) -> [PASS][48]
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-glk5/igt@kms_flip@2x-plain-flip-fb-recreate-interruptible@ab-hdmi-a1-hdmi-a2.html
   [48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-glk9/igt@kms_flip@2x-plain-flip-fb-recreate-interruptible@ab-hdmi-a1-hdmi-a2.html

  * igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
    - shard-kbl:          [DMESG-WARN][49] ([i915#180]) -> [PASS][50] +5 similar issues
   [49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-kbl7/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html
   [50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-kbl6/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html

  * igt@kms_flip@flip-vs-suspend@a-edp1:
    - shard-iclb:         [INCOMPLETE][51] ([i915#2357]) -> [PASS][52]
   [51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-iclb2/igt@kms_flip@flip-vs-suspend@a-edp1.html
   [52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-iclb6/igt@kms_flip@flip-vs-suspend@a-edp1.html

  * igt@kms_frontbuffer_tracking@fbc-rgb565-draw-pwrite:
    - shard-kbl:          [DMESG-WARN][53] ([i915#1982]) -> [PASS][54]
   [53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-kbl7/igt@kms_frontbuffer_tracking@fbc-rgb565-draw-pwrite.html
   [54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-kbl6/igt@kms_frontbuffer_tracking@fbc-rgb565-draw-pwrite.html

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-fullscreen:
    - shard-tglb:         [DMESG-WARN][55] ([i915#1982]) -> [PASS][56] +1 similar issue
   [55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-tglb5/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-fullscreen.html
   [56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-tglb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-fullscreen.html

  * igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
    - shard-skl:          [DMESG-FAIL][57] ([fdo#108145] / [i915#1982]) -> [PASS][58]
   [57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl2/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html
   [58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl7/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html

  * igt@kms_psr@psr2_primary_mmap_cpu:
    - shard-iclb:         [SKIP][59] ([fdo#109441]) -> [PASS][60] +2 similar issues
   [59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-iclb5/igt@kms_psr@psr2_primary_mmap_cpu.html
   [60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-iclb2/igt@kms_psr@psr2_primary_mmap_cpu.html

  * igt@kms_setmode@basic:
    - shard-skl:          [FAIL][61] ([i915#31]) -> [PASS][62]
   [61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl6/igt@kms_setmode@basic.html
   [62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl5/igt@kms_setmode@basic.html

  * igt@kms_vblank@pipe-c-query-forked-hang:
    - shard-apl:          [DMESG-WARN][63] ([i915#1635] / [i915#1982]) -> [PASS][64]
   [63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-apl7/igt@kms_vblank@pipe-c-query-forked-hang.html
   [64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-apl7/igt@kms_vblank@pipe-c-query-forked-hang.html

  * igt@perf@polling-parameterized:
    - shard-kbl:          [FAIL][65] ([i915#1542]) -> [PASS][66]
   [65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-kbl2/igt@perf@polling-parameterized.html
   [66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-kbl6/igt@perf@polling-parameterized.html

  
#### Warnings ####

  * igt@i915_pm_dc@dc6-psr:
    - shard-skl:          [FAIL][67] ([i915#1899]) -> [FAIL][68] ([i915#454])
   [67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl1/igt@i915_pm_dc@dc6-psr.html
   [68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl4/igt@i915_pm_dc@dc6-psr.html

  * igt@kms_flip@plain-flip-ts-check@a-edp1:
    - shard-skl:          [FAIL][69] ([i915#2122]) -> [DMESG-WARN][70] ([i915#1982])
   [69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9023/shard-skl10/igt@kms_flip@plain-flip-ts-check@a-edp1.html
   [70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/shard-skl2/igt@kms_flip@plain-flip-ts-check@a-edp1.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [CI#80]: https://gitlab.freedesktop.org/gfx-ci/i915-infra/issues/80
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
  [i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1899]: https://gitlab.freedesktop.org/drm/intel/issues/1899
  [i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
  [i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
  [i915#2357]: https://gitlab.freedesktop.org/drm/intel/issues/2357
  [i915#2424]: https://gitlab.freedesktop.org/drm/intel/issues/2424
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
  [i915#409]: https://gitlab.freedesktop.org/drm/intel/issues/409
  [i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
  [i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
  [i915#96]: https://gitlab.freedesktop.org/drm/intel/issues/96


Participating hosts (11 -> 12)
------------------------------

  Additional (1): pig-snb-2600 


Build changes
-------------

  * Linux: CI_DRM_9023 -> Patchwork_18525

  CI-20190529: 20190529
  CI_DRM_9023: 5887fa2d8b9b7f6a278f9a1bc8642cb9d5d0279a @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5787: 0ec962017c8131de14e0cb038f7f76b1f17ed637 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_18525: 224cc64f164cdd7cddd175fa494c4cd7581859f1 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18525/index.html

[-- Attachment #1.2: Type: text/html, Size: 19201 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch (rev2)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 7879 bytes --]

== Series Details ==

Series: series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch (rev2)
URL   : https://patchwork.freedesktop.org/series/81824/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9025 -> Patchwork_18533
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/index.html

Known issues
------------

  Here are the changes found in Patchwork_18533 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_pm_rpm@basic-pci-d3-state:
    - fi-bsw-kefka:       [PASS][1] -> [DMESG-WARN][2] ([i915#1982])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-bsw-kefka/igt@i915_pm_rpm@basic-pci-d3-state.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-bsw-kefka/igt@i915_pm_rpm@basic-pci-d3-state.html

  * igt@vgem_basic@sysfs:
    - fi-tgl-y:           [PASS][3] -> [DMESG-WARN][4] ([i915#402]) +1 similar issue
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-tgl-y/igt@vgem_basic@sysfs.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-tgl-y/igt@vgem_basic@sysfs.html

  * igt@vgem_basic@unload:
    - fi-kbl-x1275:       [PASS][5] -> [DMESG-WARN][6] ([i915#62] / [i915#92])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-x1275/igt@vgem_basic@unload.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-x1275/igt@vgem_basic@unload.html

  
#### Possible fixes ####

  * {igt@core_hotunplug@unbind-rebind}:
    - fi-kbl-x1275:       [DMESG-WARN][7] ([i915#62] / [i915#92]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-x1275/igt@core_hotunplug@unbind-rebind.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-x1275/igt@core_hotunplug@unbind-rebind.html

  * igt@i915_module_load@reload:
    - fi-apl-guc:         [DMESG-WARN][9] ([i915#1635] / [i915#1982]) -> [PASS][10]
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-apl-guc/igt@i915_module_load@reload.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-apl-guc/igt@i915_module_load@reload.html

  * igt@kms_busy@basic@flip:
    - fi-kbl-x1275:       [DMESG-WARN][11] ([i915#62] / [i915#92] / [i915#95]) -> [PASS][12]
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-x1275/igt@kms_busy@basic@flip.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-x1275/igt@kms_busy@basic@flip.html

  * igt@kms_chamelium@common-hpd-after-suspend:
    - fi-kbl-7500u:       [DMESG-WARN][13] ([i915#2203]) -> [PASS][14]
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-7500u/igt@kms_chamelium@common-hpd-after-suspend.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-7500u/igt@kms_chamelium@common-hpd-after-suspend.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
    - fi-icl-u2:          [DMESG-WARN][15] ([i915#1982]) -> [PASS][16] +2 similar issues
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-icl-u2/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-icl-u2/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy.html

  * igt@kms_flip@basic-flip-vs-dpms@d-dsi1:
    - {fi-tgl-dsi}:       [DMESG-WARN][17] ([i915#1982]) -> [PASS][18]
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-tgl-dsi/igt@kms_flip@basic-flip-vs-dpms@d-dsi1.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-tgl-dsi/igt@kms_flip@basic-flip-vs-dpms@d-dsi1.html

  * igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2:
    - fi-skl-guc:         [DMESG-WARN][19] ([i915#2203]) -> [PASS][20]
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-skl-guc/igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-skl-guc/igt@kms_flip@basic-flip-vs-wf_vblank@c-hdmi-a2.html

  * igt@prime_vgem@basic-read:
    - fi-tgl-y:           [DMESG-WARN][21] ([i915#402]) -> [PASS][22] +1 similar issue
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-tgl-y/igt@prime_vgem@basic-read.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-tgl-y/igt@prime_vgem@basic-read.html

  
#### Warnings ####

  * igt@gem_exec_suspend@basic-s0:
    - fi-kbl-x1275:       [DMESG-WARN][23] ([i915#1982] / [i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][24] ([i915#62] / [i915#92] / [i915#95])
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-x1275/igt@gem_exec_suspend@basic-s0.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-x1275/igt@gem_exec_suspend@basic-s0.html

  * igt@i915_pm_rpm@module-reload:
    - fi-tgl-y:           [DMESG-WARN][25] ([i915#1982] / [i915#2411]) -> [DMESG-WARN][26] ([i915#2411]) +1 similar issue
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-tgl-y/igt@i915_pm_rpm@module-reload.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-tgl-y/igt@i915_pm_rpm@module-reload.html

  * igt@kms_cursor_legacy@basic-flip-after-cursor-legacy:
    - fi-kbl-x1275:       [DMESG-WARN][27] ([i915#62] / [i915#92]) -> [DMESG-WARN][28] ([i915#62] / [i915#92] / [i915#95]) +3 similar issues
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-x1275/igt@kms_cursor_legacy@basic-flip-after-cursor-legacy.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-x1275/igt@kms_cursor_legacy@basic-flip-after-cursor-legacy.html

  * igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-c:
    - fi-kbl-x1275:       [DMESG-WARN][29] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][30] ([i915#62] / [i915#92]) +3 similar issues
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/fi-kbl-x1275/igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-c.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/fi-kbl-x1275/igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-c.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
  [i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
  [i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
  [i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
  [i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95


Participating hosts (45 -> 40)
------------------------------

  Missing    (5): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_9025 -> Patchwork_18533

  CI-20190529: 20190529
  CI_DRM_9025: 955d04e2ed0cf4bb4679f594a852cc2eebe8266b @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5787: 0ec962017c8131de14e0cb038f7f76b1f17ed637 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_18533: a6cca781d1311a096982b5f92e569c8f6f7ff973 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

a6cca781d131 drm/i915/display: Program PSR2 selective fetch registers
94456d671376 drm/i915/display: Check PSR parameter and flag only in state compute phase
a62e4234fd43 drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/index.html

[-- Attachment #1.2: Type: text/html, Size: 10685 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch (rev2)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 15438 bytes --]

== Series Details ==

Series: series starting with [v3,1/3] drm/i915/display: Ignore IGNORE_PSR2_HW_TRACKING for platforms without sel fetch (rev2)
URL   : https://patchwork.freedesktop.org/series/81824/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_9025_full -> Patchwork_18533_full
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_18533_full absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_18533_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_18533_full:

### IGT changes ###

#### Possible regressions ####

  * igt@i915_pm_backlight@fade_with_suspend:
    - shard-skl:          [PASS][1] -> [INCOMPLETE][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl1/igt@i915_pm_backlight@fade_with_suspend.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl7/igt@i915_pm_backlight@fade_with_suspend.html

  
Known issues
------------

  Here are the changes found in Patchwork_18533_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_exec_reloc@basic-many-active@rcs0:
    - shard-glk:          [PASS][3] -> [FAIL][4] ([i915#2389]) +3 similar issues
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-glk2/igt@gem_exec_reloc@basic-many-active@rcs0.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-glk7/igt@gem_exec_reloc@basic-many-active@rcs0.html

  * igt@gem_huc_copy@huc-copy:
    - shard-tglb:         [PASS][5] -> [SKIP][6] ([i915#2190])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-tglb7/igt@gem_huc_copy@huc-copy.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-tglb6/igt@gem_huc_copy@huc-copy.html

  * igt@gen9_exec_parse@allowed-all:
    - shard-kbl:          [PASS][7] -> [DMESG-WARN][8] ([i915#1436] / [i915#716])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-kbl2/igt@gen9_exec_parse@allowed-all.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-kbl6/igt@gen9_exec_parse@allowed-all.html

  * igt@i915_selftest@mock@requests:
    - shard-skl:          [PASS][9] -> [INCOMPLETE][10] ([i915#198] / [i915#2278])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl1/igt@i915_selftest@mock@requests.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl3/igt@i915_selftest@mock@requests.html

  * igt@i915_suspend@sysfs-reader:
    - shard-kbl:          [PASS][11] -> [DMESG-WARN][12] ([i915#180])
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-kbl7/igt@i915_suspend@sysfs-reader.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-kbl3/igt@i915_suspend@sysfs-reader.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
    - shard-skl:          [PASS][13] -> [DMESG-WARN][14] ([i915#1982]) +6 similar issues
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl7/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl1/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html

  * igt@kms_draw_crc@draw-method-rgb565-pwrite-untiled:
    - shard-skl:          [PASS][15] -> [FAIL][16] ([i915#177] / [i915#52] / [i915#54])
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl5/igt@kms_draw_crc@draw-method-rgb565-pwrite-untiled.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl5/igt@kms_draw_crc@draw-method-rgb565-pwrite-untiled.html

  * igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1:
    - shard-hsw:          [PASS][17] -> [INCOMPLETE][18] ([i915#2055])
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-hsw8/igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-hsw6/igt@kms_flip@flip-vs-suspend-interruptible@c-hdmi-a1.html

  * igt@kms_flip@plain-flip-fb-recreate@c-edp1:
    - shard-skl:          [PASS][19] -> [FAIL][20] ([i915#2122]) +1 similar issue
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl3/igt@kms_flip@plain-flip-fb-recreate@c-edp1.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl7/igt@kms_flip@plain-flip-fb-recreate@c-edp1.html

  * igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc:
    - shard-skl:          [PASS][21] -> [FAIL][22] ([i915#49])
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl5/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl5/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc.html

  * igt@kms_hdr@bpc-switch:
    - shard-skl:          [PASS][23] -> [FAIL][24] ([i915#1188])
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl8/igt@kms_hdr@bpc-switch.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl5/igt@kms_hdr@bpc-switch.html

  * igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
    - shard-skl:          [PASS][25] -> [FAIL][26] ([fdo#108145] / [i915#265]) +1 similar issue
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl5/igt@kms_plane_alpha_blend@pipe-a-coverage-7efc.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl5/igt@kms_plane_alpha_blend@pipe-a-coverage-7efc.html

  * igt@kms_psr@psr2_cursor_render:
    - shard-iclb:         [PASS][27] -> [SKIP][28] ([fdo#109441]) +3 similar issues
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb7/igt@kms_psr@psr2_cursor_render.html

  * igt@perf@polling-small-buf:
    - shard-iclb:         [PASS][29] -> [FAIL][30] ([i915#1722])
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb6/igt@perf@polling-small-buf.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb3/igt@perf@polling-small-buf.html

  * igt@perf_pmu@module-unload:
    - shard-tglb:         [PASS][31] -> [DMESG-WARN][32] ([i915#1982]) +5 similar issues
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-tglb2/igt@perf_pmu@module-unload.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-tglb5/igt@perf_pmu@module-unload.html

  
#### Possible fixes ####

  * igt@gem_eio@suspend:
    - shard-iclb:         [INCOMPLETE][33] -> [PASS][34]
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb3/igt@gem_eio@suspend.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb8/igt@gem_eio@suspend.html

  * igt@i915_pm_dc@dc6-psr:
    - shard-iclb:         [FAIL][35] ([i915#1899]) -> [PASS][36]
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb6/igt@i915_pm_dc@dc6-psr.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb3/igt@i915_pm_dc@dc6-psr.html

  * igt@i915_selftest@mock@contexts:
    - shard-apl:          [INCOMPLETE][37] ([i915#1635] / [i915#2278]) -> [PASS][38]
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-apl2/igt@i915_selftest@mock@contexts.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-apl7/igt@i915_selftest@mock@contexts.html

  * igt@kms_cursor_crc@pipe-c-cursor-suspend:
    - shard-kbl:          [DMESG-WARN][39] ([i915#180]) -> [PASS][40]
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-kbl3/igt@kms_cursor_crc@pipe-c-cursor-suspend.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-kbl1/igt@kms_cursor_crc@pipe-c-cursor-suspend.html

  * igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
    - shard-glk:          [FAIL][41] ([i915#72]) -> [PASS][42]
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-glk5/igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-glk2/igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy.html

  * igt@kms_flip@2x-dpms-vs-vblank-race@ab-vga1-hdmi-a1:
    - shard-hsw:          [DMESG-WARN][43] ([i915#1982]) -> [PASS][44]
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-hsw6/igt@kms_flip@2x-dpms-vs-vblank-race@ab-vga1-hdmi-a1.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-hsw7/igt@kms_flip@2x-dpms-vs-vblank-race@ab-vga1-hdmi-a1.html

  * igt@kms_flip@2x-flip-vs-suspend-interruptible@bc-vga1-hdmi-a1:
    - shard-hsw:          [INCOMPLETE][45] ([i915#2055]) -> [PASS][46]
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-hsw8/igt@kms_flip@2x-flip-vs-suspend-interruptible@bc-vga1-hdmi-a1.html
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-hsw8/igt@kms_flip@2x-flip-vs-suspend-interruptible@bc-vga1-hdmi-a1.html

  * igt@kms_flip@plain-flip-ts-check-interruptible@c-edp1:
    - shard-skl:          [FAIL][47] ([i915#2122]) -> [PASS][48] +1 similar issue
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl1/igt@kms_flip@plain-flip-ts-check-interruptible@c-edp1.html
   [48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl3/igt@kms_flip@plain-flip-ts-check-interruptible@c-edp1.html

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-pri-indfb-multidraw:
    - shard-iclb:         [DMESG-WARN][49] ([i915#1982]) -> [PASS][50]
   [49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb7/igt@kms_frontbuffer_tracking@fbcpsr-1p-pri-indfb-multidraw.html
   [50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb4/igt@kms_frontbuffer_tracking@fbcpsr-1p-pri-indfb-multidraw.html

  * igt@kms_hdr@bpc-switch-dpms:
    - shard-skl:          [FAIL][51] ([i915#1188]) -> [PASS][52]
   [51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl10/igt@kms_hdr@bpc-switch-dpms.html
   [52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl8/igt@kms_hdr@bpc-switch-dpms.html

  * igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
    - shard-skl:          [DMESG-WARN][53] ([i915#1982]) -> [PASS][54] +4 similar issues
   [53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl8/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html
   [54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl6/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html

  * igt@kms_psr2_su@page_flip:
    - shard-iclb:         [SKIP][55] ([fdo#109642] / [fdo#111068]) -> [PASS][56]
   [55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb6/igt@kms_psr2_su@page_flip.html
   [56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb2/igt@kms_psr2_su@page_flip.html

  * igt@kms_psr@psr2_sprite_plane_move:
    - shard-iclb:         [SKIP][57] ([fdo#109441]) -> [PASS][58] +2 similar issues
   [57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-iclb6/igt@kms_psr@psr2_sprite_plane_move.html
   [58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html

  * igt@kms_vblank@pipe-b-query-busy:
    - shard-apl:          [DMESG-WARN][59] ([i915#1635] / [i915#1982]) -> [PASS][60] +2 similar issues
   [59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-apl7/igt@kms_vblank@pipe-b-query-busy.html
   [60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-apl3/igt@kms_vblank@pipe-b-query-busy.html

  
#### Warnings ####

  * igt@i915_pm_dc@dc6-psr:
    - shard-skl:          [FAIL][61] ([i915#1899]) -> [FAIL][62] ([i915#454])
   [61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl3/igt@i915_pm_dc@dc6-psr.html
   [62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl10/igt@i915_pm_dc@dc6-psr.html

  * igt@kms_flip@flip-vs-suspend@a-edp1:
    - shard-skl:          [INCOMPLETE][63] ([i915#198] / [i915#1982]) -> [DMESG-WARN][64] ([i915#1982])
   [63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl2/igt@kms_flip@flip-vs-suspend@a-edp1.html
   [64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl7/igt@kms_flip@flip-vs-suspend@a-edp1.html

  * igt@runner@aborted:
    - shard-skl:          [FAIL][65] ([i915#1436]) -> [FAIL][66] ([i915#1436] / [i915#2439])
   [65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9025/shard-skl1/igt@runner@aborted.html
   [66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/shard-skl3/igt@runner@aborted.html

  
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
  [fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
  [i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
  [i915#1722]: https://gitlab.freedesktop.org/drm/intel/issues/1722
  [i915#177]: https://gitlab.freedesktop.org/drm/intel/issues/177
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1899]: https://gitlab.freedesktop.org/drm/intel/issues/1899
  [i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2055]: https://gitlab.freedesktop.org/drm/intel/issues/2055
  [i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
  [i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
  [i915#2278]: https://gitlab.freedesktop.org/drm/intel/issues/2278
  [i915#2389]: https://gitlab.freedesktop.org/drm/intel/issues/2389
  [i915#2439]: https://gitlab.freedesktop.org/drm/intel/issues/2439
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
  [i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
  [i915#52]: https://gitlab.freedesktop.org/drm/intel/issues/52
  [i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
  [i915#716]: https://gitlab.freedesktop.org/drm/intel/issues/716
  [i915#72]: https://gitlab.freedesktop.org/drm/intel/issues/72


Participating hosts (11 -> 10)
------------------------------

  Missing    (1): pig-icl-1065g7 


Build changes
-------------

  * Linux: CI_DRM_9025 -> Patchwork_18533

  CI-20190529: 20190529
  CI_DRM_9025: 955d04e2ed0cf4bb4679f594a852cc2eebe8266b @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5787: 0ec962017c8131de14e0cb038f7f76b1f17ed637 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_18533: a6cca781d1311a096982b5f92e569c8f6f7ff973 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18533/index.html

[-- Attachment #1.2: Type: text/html, Size: 18059 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx