Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Hogander, Jouni" <jouni.hogander@intel.com>
To: "intel-xe@lists.freedesktop.org" <intel-xe@lists.freedesktop.org>,
	"Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Cc: "ville.syrjala@linux.intel.com" <ville.syrjala@linux.intel.com>
Subject: Re: [PATCH 2/5] drm/i915/dp: Add helper to get min sdp guardband
Date: Fri, 17 Oct 2025 13:03:40 +0000	[thread overview]
Message-ID: <f1dd5a8642614e0ed412f4ec1fe3fe460299161b.camel@intel.com> (raw)
In-Reply-To: <20251017123504.2247954-3-ankit.k.nautiyal@intel.com>

On Fri, 2025-10-17 at 18:05 +0530, Ankit Nautiyal wrote:
> Add a helper to compute vblank time needed for transmitting specific
> DisplayPort SDPs like PPS, GAMUT_METADATA, and VSC_EXT. Latency is
> based on line count per packet type.
> 
> This will be used to ensure adequate guardband when features like
> DSC/HDR
> are enabled.
> 
> v2: Correct the lines required for PPS SDP. (Jouni)
> 
> Bspec: 70151
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 36
> +++++++++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_dp.h |  2 ++
>  2 files changed, 38 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 7059d55687cf..acbb4d476543 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -6990,3 +6990,39 @@ int intel_dp_compute_config_late(struct
> intel_encoder *encoder,
>  
>  	return 0;
>  }
> +
> +static
> +int intel_dp_get_lines_for_sdp(u32 type)
> +{
> +	switch (type) {
> +	case DP_SDP_VSC_EXT_VESA:
> +	case DP_SDP_VSC_EXT_CEA:
> +		return 10;
> +	case HDMI_PACKET_TYPE_GAMUT_METADATA:
> +		return 8;
> +	case DP_SDP_PPS:
> +		return 7;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +int intel_dp_sdp_min_guardband(const struct intel_crtc_state
> *crtc_state,
> +			       bool assume_all_enabled)
> +{
> +	int sdp_guardband = 0;
> +
> +	if (assume_all_enabled ||
> +	    crtc_state->infoframes.enable &
> +	   
> intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA))
> +		sdp_guardband = max(sdp_guardband,
> +				   
> intel_dp_get_lines_for_sdp(HDMI_PACKET_TYPE_GAMUT_METADATA));
> +
> +	if (assume_all_enabled ||
> +	    crtc_state->dsc.compression_enable)
> +		sdp_guardband = max(sdp_guardband,
> intel_dp_get_lines_for_sdp(DP_SDP_PPS));
> +
> +	return sdp_guardband;
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h
> b/drivers/gpu/drm/i915/display/intel_dp.h
> index 281ced3a3b39..7ee5aeb28fe2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -221,5 +221,7 @@ bool intel_dp_in_hdr_mode(const struct
> drm_connector_state *conn_state);
>  int intel_dp_compute_config_late(struct intel_encoder *encoder,
>  				 struct intel_crtc_state
> *crtc_state,
>  				 struct drm_connector_state
> *conn_state);
> +int intel_dp_sdp_min_guardband(const struct intel_crtc_state
> *crtc_state,
> +			       bool assume_all_enabled);
>  
>  #endif /* __INTEL_DP_H__ */


  reply	other threads:[~2025-10-17 13:03 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-17 12:34 [PATCH 0/5] Optimize vrr.guardband Ankit Nautiyal
2025-10-17 12:35 ` [PATCH 1/5] drm/i915/psr: Add helper to get min psr guardband Ankit Nautiyal
2025-10-17 13:02   ` Hogander, Jouni
2025-10-17 12:35 ` [PATCH 2/5] drm/i915/dp: Add helper to get min sdp guardband Ankit Nautiyal
2025-10-17 13:03   ` Hogander, Jouni [this message]
2025-10-17 12:35 ` [PATCH 3/5] drm/i915/dp: Check if guardband can accommodate sdp latencies Ankit Nautiyal
2025-10-17 12:35 ` [PATCH 4/5] drm/i915/vrr: Use the min static optimized guardband Ankit Nautiyal
2025-10-17 12:35 ` [PATCH 5/5] drm/i915/vrr: Use optimized guardband whenever VRR TG is active Ankit Nautiyal
2025-10-17 13:26   ` Ville Syrjälä
2025-10-17 13:35 ` ✓ i915.CI.BAT: success for Optimize vrr.guardband (rev4) Patchwork
2025-10-17 21:29 ` ✗ i915.CI.Full: failure " Patchwork
2025-10-18  2:31   ` Nautiyal, Ankit K
2025-10-22  3:34 ` ✓ i915.CI.Full: success " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2025-10-17  5:01 [PATCH 0/5] Optimize vrr.guardband Ankit Nautiyal
2025-10-17  5:01 ` [PATCH 2/5] drm/i915/dp: Add helper to get min sdp guardband Ankit Nautiyal
2025-10-17 10:50   ` Hogander, Jouni
2025-10-17 11:07     ` Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f1dd5a8642614e0ed412f4ec1fe3fe460299161b.camel@intel.com \
    --to=jouni.hogander@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox