From: Takashi Iwai <tiwai@suse.de>
To: "Wang, Xingchao" <xingchao.wang@intel.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"Li, Jocelyn" <jocelyn.li@intel.com>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
Wang Xingchao <xingchao.wang@linux.intel.com>,
"Girdwood, Liam R" <liam.r.girdwood@intel.com>,
"david.henningsson@canonical.com"
<david.henningsson@canonical.com>
Subject: Re: [PATCH 3/4] ALSA: hda - Fix runtime PM check
Date: Thu, 23 May 2013 10:09:37 +0200 [thread overview]
Message-ID: <s5h61ya86da.wl%tiwai@suse.de> (raw)
In-Reply-To: <46B810F6945F7C4788E11DCE57EC4890118165D2@SHSMSX104.ccr.corp.intel.com>
At Thu, 23 May 2013 07:53:00 +0000,
Wang, Xingchao wrote:
>
> Hi Takashi,
>
> > -----Original Message-----
> > From: Takashi Iwai [mailto:tiwai@suse.de]
> > Sent: Thursday, May 23, 2013 2:03 PM
> > To: Wang Xingchao
> > Cc: daniel@ffwll.ch; alsa-devel@alsa-project.org;
> > intel-gfx@lists.freedesktop.org; david.henningsson@canonical.com; Girdwood,
> > Liam R; Li, Jocelyn; Wang, Xingchao
> > Subject: Re: [PATCH 3/4] ALSA: hda - Fix runtime PM check
> >
> > At Thu, 23 May 2013 01:04:15 +0800,
> > Wang Xingchao wrote:
> > >
> > > The device can support runtime PM no matter whether it support signal
> > > wakeup or not. For some chips like Haswell which doesnot support PME
> > > by default, this patch let haswell Display HD-A controller enter
> > > runtime suspend, and bring more power saving whith power-well feature
> > > enabled.
> > > Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com>
> >
> > This change has nothing to do with the power well fix, thus no reason to put in
> > the series.
>
> But power-well feature depends on HD-A controller's power-save enabling, without this patch,
> Power-well would not be shutdown automatically, thus cause more
> power.
Then the fix order is wrong. Fix this first, then the rest.
Takashi
> So I thought it should
> be part of the patchset. Anyway it's a more general fix not only for Haswell, so better to leave it alone.
> I will split it from the patchset in next version.
>
> Thanks
> --xingchao
> >
> >
> > Takashi
> >
> > > ---
> > > sound/pci/hda/hda_intel.c | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> > > index 54c7c22..f20a88c 100644
> > > --- a/sound/pci/hda/hda_intel.c
> > > +++ b/sound/pci/hda/hda_intel.c
> > > @@ -3755,7 +3755,7 @@ static int azx_probe(struct pci_dev *pci,
> > > goto out_free_power;
> > > }
> > >
> > > - if (pci_dev_run_wake(pci))
> > > + if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
> > > pm_runtime_put_noidle(&pci->dev);
> > >
> > > dev++;
> > > @@ -3834,7 +3834,7 @@ static void azx_remove(struct pci_dev *pci)
> > > struct snd_card *card = pci_get_drvdata(pci);
> > > struct azx *chip = card->private_data;
> > >
> > > - if (pci_dev_run_wake(pci))
> > > + if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
> > > pm_runtime_get_noresume(&pci->dev);
> > >
> > > if (card)
> > > --
> > > 1.8.1.2
> > >
>
next prev parent reply other threads:[~2013-05-23 8:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-22 17:04 [PATCH 0/4 V5] Power-well API implementation for Haswell Wang Xingchao
2013-05-22 17:04 ` [PATCH 1/4 V5] i915/drm: Add private api for power well usage Wang Xingchao
2013-05-23 15:14 ` Takashi Iwai
2013-05-22 17:04 ` [PATCH 2/4 V5] ALSA: hda - Add power-welll support for haswell HDA Wang Xingchao
2013-05-22 17:04 ` [PATCH 3/4] ALSA: hda - Fix runtime PM check Wang Xingchao
2013-05-23 6:02 ` Takashi Iwai
2013-05-23 7:53 ` Wang, Xingchao
2013-05-23 8:09 ` Takashi Iwai [this message]
2013-05-23 10:20 ` Wang, Xingchao
2013-05-23 12:34 ` David Henningsson
2013-05-23 12:39 ` [alsa-devel] " Takashi Iwai
2013-05-22 17:04 ` [PATCH 4/4] ALSA: hda - Continue probe in work context to avoid request_module deadlock Wang Xingchao
2013-05-23 6:47 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h61ya86da.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=david.henningsson@canonical.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jocelyn.li@intel.com \
--cc=liam.r.girdwood@intel.com \
--cc=xingchao.wang@intel.com \
--cc=xingchao.wang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox