Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Duyck <aduyck@mirantis.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [next PATCH v3 11/15] i40e/i40evf: Enable support for SKB_GSO_UDP_TUNNEL_CSUM
Date: Sun, 24 Jan 2016 21:17:29 -0800	[thread overview]
Message-ID: <20160125051729.12004.54009.stgit@localhost.localdomain> (raw)
In-Reply-To: <20160125050602.12004.38884.stgit@localhost.localdomain>

The XL722 has support for providing the outer UDP tunnel checksum on
transmits.  Make use of this feature to support segmenting UDP tunnels with
outer checksums enabled.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   |   19 ++++++++++++++++++-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c |   19 ++++++++++++++++++-
 2 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 890d2f580434..6a76c169c07e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2272,6 +2272,7 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	} ip;
 	union {
 		struct tcphdr *tcp;
+		struct udphdr *udp;
 		unsigned char *hdr;
 	} l4;
 	u32 paylen, l4_offset;
@@ -2298,7 +2299,18 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
 		ip.v6->payload_len = 0;
 	}
 
-	if (skb_shinfo(skb)->gso_type & (SKB_GSO_UDP_TUNNEL | SKB_GSO_GRE)) {
+	if (skb_shinfo(skb)->gso_type & (SKB_GSO_UDP_TUNNEL | SKB_GSO_GRE |
+					 SKB_GSO_UDP_TUNNEL_CSUM)) {
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM) {
+			/* determine offset of outer transport header */
+			l4_offset = l4.hdr - skb->data;
+
+			/* remove payload length from outer checksum */
+			paylen = (__force u16)l4.udp->check;
+			paylen += ntohs(1) * (u16)~(skb->len - l4_offset);
+			l4.udp->check = ~csum_fold((__force __wsum)paylen);
+		}
+
 		/* reset pointers to inner headers */
 		ip.hdr = skb_inner_network_header(skb);
 		l4.hdr = skb_inner_transport_header(skb);
@@ -2460,6 +2472,11 @@ static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
 		tunnel |= ((ip.hdr - l4.hdr) / 2) <<
 			  I40E_TXD_CTX_QW0_NATLEN_SHIFT;
 
+		/* indicate if we need to offload outer UDP header */
+		if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
+		    (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
+			tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;
+
 		/* record tunnel offload values */
 		*cd_tunneling |= tunnel;
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 126b748c0ff1..a4f03f6752cc 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1532,6 +1532,7 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	} ip;
 	union {
 		struct tcphdr *tcp;
+		struct udphdr *udp;
 		unsigned char *hdr;
 	} l4;
 	u32 paylen, l4_offset;
@@ -1558,7 +1559,18 @@ static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
 		ip.v6->payload_len = 0;
 	}
 
-	if (skb_shinfo(skb)->gso_type & (SKB_GSO_UDP_TUNNEL | SKB_GSO_GRE)) {
+	if (skb_shinfo(skb)->gso_type & (SKB_GSO_UDP_TUNNEL | SKB_GSO_GRE |
+					 SKB_GSO_UDP_TUNNEL_CSUM)) {
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM) {
+			/* determine offset of outer transport header */
+			l4_offset = l4.hdr - skb->data;
+
+			/* remove payload length from outer checksum */
+			paylen = (__force u16)l4.udp->check;
+			paylen += ntohs(1) * (u16)~(skb->len - l4_offset);
+			l4.udp->check = ~csum_fold((__force __wsum)paylen);
+		}
+
 		/* reset pointers to inner headers */
 		ip.hdr = skb_inner_network_header(skb);
 		l4.hdr = skb_inner_transport_header(skb);
@@ -1678,6 +1690,11 @@ static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
 		tunnel |= ((ip.hdr - l4.hdr) / 2) <<
 			  I40E_TXD_CTX_QW0_NATLEN_SHIFT;
 
+		/* indicate if we need to offload outer UDP header */
+		if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
+		    (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
+			tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;
+
 		/* record tunnel offload values */
 		*cd_tunneling |= tunnel;
 


  parent reply	other threads:[~2016-01-25  5:17 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-25  5:16 [Intel-wired-lan] [next PATCH v3 00/15] TSO and checksum fixes for i40e Alexander Duyck
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 01/15] i40e/i40evf: Drop outer checksum offload that was not requested Alexander Duyck
2016-01-27 16:00   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 02/15] i40e/i40evf: Use u64 values instead of casting them in TSO function Alexander Duyck
2016-01-27 16:03   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 03/15] i40e/i40evf: Factor out L4 header and checksum from L3 bits in TSO path Alexander Duyck
2016-01-27 16:09   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 04/15] i40e/i40evf: Consolidate all header changes into TSO function Alexander Duyck
2016-01-27 16:14   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 05/15] i40e/i40evf: Replace header pointers with unions of pointers in Tx checksum path Alexander Duyck
2016-01-27 16:27   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 06/15] i40e/i40evf: Add support for IPv4 encapsulated in IPv6 Alexander Duyck
2016-01-27 18:04   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 07/15] i40e/i40evf: Handle IPv6 extension headers in checksum offload Alexander Duyck
2016-01-27 18:05   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 08/15] i40e/i40evf: Do not write to descriptor unless we complete Alexander Duyck
2016-01-27 18:07   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 09/15] i40e/i40evf: Add exception handling for Tx checksum Alexander Duyck
2016-01-27 18:08   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 10/15] i40e/i40evf: Clean-up Rx packet checksum handling Alexander Duyck
2016-01-27 18:09   ` Bowers, AndrewX
2016-01-25  5:17 ` Alexander Duyck [this message]
2016-01-27 18:17   ` [Intel-wired-lan] [next PATCH v3 11/15] i40e/i40evf: Enable support for SKB_GSO_UDP_TUNNEL_CSUM Bowers, AndrewX
2016-02-02 22:49   ` Jesse Brandeburg
2016-02-02 23:10     ` Jesse Brandeburg
2016-02-02 23:18       ` Jesse Brandeburg
2016-02-03  0:06     ` Alexander Duyck
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 12/15] i40e: Fix ATR in relation to tunnels Alexander Duyck
2016-01-25 19:27   ` Patil, Kiran
2016-01-25 22:21     ` Alexander Duyck
2016-01-26  0:16       ` Patil, Kiran
2016-01-27 18:18   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 13/15] i40e: Do not drop support for IPv6 VXLAN or GENEVE tunnels Alexander Duyck
2016-01-27 18:26   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 14/15] i40e: Update feature flags to reflect newly enabled features Alexander Duyck
2016-01-27 18:44   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 15/15] i40evf: " Alexander Duyck
2016-01-25 19:43   ` Singhai, Anjali
2016-01-27 18:45   ` Bowers, AndrewX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160125051729.12004.54009.stgit@localhost.localdomain \
    --to=aduyck@mirantis.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox