Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Duyck <aduyck@mirantis.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [next PATCH v3 12/15] i40e: Fix ATR in relation to tunnels
Date: Sun, 24 Jan 2016 21:17:36 -0800	[thread overview]
Message-ID: <20160125051736.12004.13420.stgit@localhost.localdomain> (raw)
In-Reply-To: <20160125050602.12004.38884.stgit@localhost.localdomain>

This patch contains a number of fixes to make certain that we are using
the correct protocols when parsing both the inner and outer headers of a
frame that is mixed between IPv4 and IPv6 for inner and outer.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c |   28 +++++++++++----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 6a76c169c07e..ed8d13637c15 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2030,10 +2030,9 @@ tx_only:
  * @tx_ring:  ring to add programming descriptor to
  * @skb:      send buffer
  * @tx_flags: send tx flags
- * @protocol: wire protocol
  **/
 static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
-		     u32 tx_flags, __be16 protocol)
+		     u32 tx_flags)
 {
 	struct i40e_filter_program_desc *fdir_desc;
 	struct i40e_pf *pf = tx_ring->vsi->back;
@@ -2045,6 +2044,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	struct tcphdr *th;
 	unsigned int hlen;
 	u32 flex_ptype, dtype_cmd;
+	u8 l4_proto;
 	u16 i;
 
 	/* make sure ATR is enabled */
@@ -2058,6 +2058,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	if (!tx_ring->atr_sample_rate)
 		return;
 
+	/* Currently only IPv4/IPv6 with TCP is supported */
 	if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6)))
 		return;
 
@@ -2068,26 +2069,19 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 		/* snag network header to get L4 type and address */
 		hdr.network = skb_network_header(skb);
 
-		/* Currently only IPv4/IPv6 with TCP is supported
-		 * access ihl as u8 to avoid unaligned access on ia64
-		 */
+		/* access ihl as u8 to avoid unaligned access on ia64 */
 		if (tx_flags & I40E_TX_FLAGS_IPV4)
 			hlen = (hdr.network[0] & 0x0F) << 2;
-		else if (protocol == htons(ETH_P_IPV6))
-			hlen = sizeof(struct ipv6hdr);
 		else
-			return;
+			hlen = sizeof(struct ipv6hdr);
 	}
 
-	/* Currently only IPv4/IPv6 with TCP is supported
-	 * Note: tx_flags gets modified to reflect inner protocols in
+	/* Note: tx_flags gets modified to reflect inner protocols in
 	 * tx_enable_csum function if encap is enabled.
 	 */
-	if ((tx_flags & I40E_TX_FLAGS_IPV4) &&
-	    (hdr.ipv4->protocol != IPPROTO_TCP))
-		return;
-	else if ((tx_flags & I40E_TX_FLAGS_IPV6) &&
-		 (hdr.ipv6->nexthdr != IPPROTO_TCP))
+	l4_proto = (tx_flags & I40E_TX_FLAGS_IPV4) ? hdr.ipv4->protocol :
+						     hdr.ipv6->nexthdr;
+	if (l4_proto != IPPROTO_TCP)
 		return;
 
 	th = (struct tcphdr *)(hdr.network + hlen);
@@ -2124,7 +2118,7 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 
 	flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
 		      I40E_TXD_FLTR_QW0_QINDEX_MASK;
-	flex_ptype |= (protocol == htons(ETH_P_IP)) ?
+	flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ?
 		      (I40E_FILTER_PCTYPE_NONF_IPV4_TCP <<
 		       I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) :
 		      (I40E_FILTER_PCTYPE_NONF_IPV6_TCP <<
@@ -2992,7 +2986,7 @@ static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
 	 *
 	 * NOTE: this must always be directly before the data descriptor.
 	 */
-	i40e_atr(tx_ring, skb, tx_flags, protocol);
+	i40e_atr(tx_ring, skb, tx_flags);
 
 	i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len,
 		    td_cmd, td_offset);


  parent reply	other threads:[~2016-01-25  5:17 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-25  5:16 [Intel-wired-lan] [next PATCH v3 00/15] TSO and checksum fixes for i40e Alexander Duyck
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 01/15] i40e/i40evf: Drop outer checksum offload that was not requested Alexander Duyck
2016-01-27 16:00   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 02/15] i40e/i40evf: Use u64 values instead of casting them in TSO function Alexander Duyck
2016-01-27 16:03   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 03/15] i40e/i40evf: Factor out L4 header and checksum from L3 bits in TSO path Alexander Duyck
2016-01-27 16:09   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 04/15] i40e/i40evf: Consolidate all header changes into TSO function Alexander Duyck
2016-01-27 16:14   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 05/15] i40e/i40evf: Replace header pointers with unions of pointers in Tx checksum path Alexander Duyck
2016-01-27 16:27   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 06/15] i40e/i40evf: Add support for IPv4 encapsulated in IPv6 Alexander Duyck
2016-01-27 18:04   ` Bowers, AndrewX
2016-01-25  5:16 ` [Intel-wired-lan] [next PATCH v3 07/15] i40e/i40evf: Handle IPv6 extension headers in checksum offload Alexander Duyck
2016-01-27 18:05   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 08/15] i40e/i40evf: Do not write to descriptor unless we complete Alexander Duyck
2016-01-27 18:07   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 09/15] i40e/i40evf: Add exception handling for Tx checksum Alexander Duyck
2016-01-27 18:08   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 10/15] i40e/i40evf: Clean-up Rx packet checksum handling Alexander Duyck
2016-01-27 18:09   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 11/15] i40e/i40evf: Enable support for SKB_GSO_UDP_TUNNEL_CSUM Alexander Duyck
2016-01-27 18:17   ` Bowers, AndrewX
2016-02-02 22:49   ` Jesse Brandeburg
2016-02-02 23:10     ` Jesse Brandeburg
2016-02-02 23:18       ` Jesse Brandeburg
2016-02-03  0:06     ` Alexander Duyck
2016-01-25  5:17 ` Alexander Duyck [this message]
2016-01-25 19:27   ` [Intel-wired-lan] [next PATCH v3 12/15] i40e: Fix ATR in relation to tunnels Patil, Kiran
2016-01-25 22:21     ` Alexander Duyck
2016-01-26  0:16       ` Patil, Kiran
2016-01-27 18:18   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 13/15] i40e: Do not drop support for IPv6 VXLAN or GENEVE tunnels Alexander Duyck
2016-01-27 18:26   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 14/15] i40e: Update feature flags to reflect newly enabled features Alexander Duyck
2016-01-27 18:44   ` Bowers, AndrewX
2016-01-25  5:17 ` [Intel-wired-lan] [next PATCH v3 15/15] i40evf: " Alexander Duyck
2016-01-25 19:43   ` Singhai, Anjali
2016-01-27 18:45   ` Bowers, AndrewX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160125051736.12004.13420.stgit@localhost.localdomain \
    --to=aduyck@mirantis.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox