From: Andre Guedes <andre.guedes@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH 05/10] igc: Use netdev log helpers in igc_base.c
Date: Tue, 24 Mar 2020 17:38:19 -0700 [thread overview]
Message-ID: <20200325003824.5487-6-andre.guedes@intel.com> (raw)
In-Reply-To: <20200325003824.5487-1-andre.guedes@intel.com>
This patch coverts one pr_debug() call to hw_dbg() in order to keep log
output aligned with the rest of the driver. hw_dbg() is actually a macro
defined in igc_hw.h that expands to netdev_dbg().
It also takes this opportunity to remove the '\n' character at the end
of messages since it is automatically added to by netdev_dbg().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
---
drivers/net/ethernet/intel/igc/igc_base.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c
index f7fb18d8d8f5..9722db75064f 100644
--- a/drivers/net/ethernet/intel/igc/igc_base.c
+++ b/drivers/net/ethernet/intel/igc/igc_base.c
@@ -26,9 +26,9 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
*/
ret_val = igc_disable_pcie_master(hw);
if (ret_val)
- hw_dbg("PCI-E Master disable polling has failed.\n");
+ hw_dbg("PCI-E Master disable polling has failed");
- hw_dbg("Masking off all interrupts\n");
+ hw_dbg("Masking off all interrupts");
wr32(IGC_IMC, 0xffffffff);
wr32(IGC_RCTL, 0);
@@ -39,7 +39,7 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
ctrl = rd32(IGC_CTRL);
- hw_dbg("Issuing a global reset to MAC\n");
+ hw_dbg("Issuing a global reset to MAC");
wr32(IGC_CTRL, ctrl | IGC_CTRL_DEV_RST);
ret_val = igc_get_auto_rd_done(hw);
@@ -48,7 +48,7 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
* return with an error. This can happen in situations
* where there is no eeprom and prevents getting link.
*/
- hw_dbg("Auto Read Done did not complete\n");
+ hw_dbg("Auto Read Done did not complete");
}
/* Clear any pending interrupt events. */
@@ -177,7 +177,7 @@ static s32 igc_init_phy_params_base(struct igc_hw *hw)
*/
ret_val = hw->phy.ops.reset(hw);
if (ret_val) {
- hw_dbg("Error resetting the PHY.\n");
+ hw_dbg("Error resetting the PHY");
goto out;
}
@@ -292,12 +292,12 @@ static s32 igc_init_hw_base(struct igc_hw *hw)
igc_init_rx_addrs(hw, rar_count);
/* Zero out the Multicast HASH table */
- hw_dbg("Zeroing the MTA\n");
+ hw_dbg("Zeroing the MTA");
for (i = 0; i < mac->mta_reg_count; i++)
array_wr32(IGC_MTA, i, 0);
/* Zero out the Unicast HASH table */
- hw_dbg("Zeroing the UTA\n");
+ hw_dbg("Zeroing the UTA");
for (i = 0; i < mac->uta_reg_count; i++)
array_wr32(IGC_UTA, i, 0);
@@ -367,7 +367,7 @@ void igc_rx_fifo_flush_base(struct igc_hw *hw)
}
if (ms_wait == 10)
- pr_debug("Queue disable timed out after 10ms\n");
+ hw_dbg("Queue disable timed out after 10ms");
/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
* incoming packets are rejected. Set enable and wait 2ms so that
--
2.25.0
next prev parent reply other threads:[~2020-03-25 0:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 0:38 [Intel-wired-lan] [PATCH 00/10] igc: Align log messages Andre Guedes
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 01/10] igc: Use netdev log helpers in igc_main.c Andre Guedes
2020-04-02 3:33 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 02/10] igc: Use netdev log helpers in igc_ethtool.c Andre Guedes
2020-04-02 3:35 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 03/10] igc: Use netdev log helpers in igc_ptp.c Andre Guedes
2020-04-02 3:37 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 04/10] igc: Use netdev log helpers in igc_dump.c Andre Guedes
2020-04-02 3:39 ` Brown, Aaron F
2020-03-25 0:38 ` Andre Guedes [this message]
2020-04-02 3:41 ` [Intel-wired-lan] [PATCH 05/10] igc: Use netdev log helpers in igc_base.c Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 06/10] igc: Use netdev log helpers in igc_diag.c Andre Guedes
2020-04-02 3:42 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 07/10] igc: Remove '\n' from log strings in igc_i225.c Andre Guedes
2020-04-02 3:44 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 08/10] igc: Remove '\n' from log strings in igc_mac.c Andre Guedes
2020-04-02 3:46 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 09/10] igc: Remove '\n' from log messages in igc_nvm.c Andre Guedes
2020-04-02 3:48 ` Brown, Aaron F
2020-03-25 0:38 ` [Intel-wired-lan] [PATCH 10/10] igc: Remove '\n' from log strings in igc_phy.c Andre Guedes
2020-04-02 3:49 ` Brown, Aaron F
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325003824.5487-6-andre.guedes@intel.com \
--to=andre.guedes@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox