From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
To: netdev@vger.kernel.org
Cc: jiri@resnulli.us, corbet@lwn.net,
intel-wired-lan@lists.osuosl.org, linux-doc@vger.kernel.org,
jesse.brandeburg@intel.com,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
anthony.l.nguyen@intel.com, kuba@kernel.org,
vadim.fedorenko@linux.dev, pabeni@redhat.com,
davem@davemloft.net
Subject: [Intel-wired-lan] [PATCH net-next v3 2/5] dpll: spec: add support for pin-dpll signal phase offset/adjust
Date: Fri, 6 Oct 2023 13:40:58 +0200 [thread overview]
Message-ID: <20231006114101.1608796-3-arkadiusz.kubalewski@intel.com> (raw)
In-Reply-To: <20231006114101.1608796-1-arkadiusz.kubalewski@intel.com>
Add attributes for providing the user with:
- measurement of signals phase offset between pin and dpll
- ability to adjust the phase of pin signal
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
---
Documentation/netlink/specs/dpll.yaml | 33 ++++++++++++++++++++++++++-
drivers/dpll/dpll_nl.c | 8 ++++---
drivers/dpll/dpll_nl.h | 2 +-
include/uapi/linux/dpll.h | 8 ++++++-
4 files changed, 45 insertions(+), 6 deletions(-)
diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml
index 8b86b28b47a6..dc057494101f 100644
--- a/Documentation/netlink/specs/dpll.yaml
+++ b/Documentation/netlink/specs/dpll.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
name: dpll
-
+version: 2
doc: DPLL subsystem.
definitions:
@@ -164,6 +164,18 @@ definitions:
-
name: state-can-change
doc: pin state can be changed
+ -
+ type: const
+ name: phase-offset-divider
+ value: 1000
+ doc: |
+ phase offset divider allows userspace to calculate a value of
+ measured signal phase difference between a pin and dpll device
+ as a fractional value with three digit decimal precision.
+ Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an
+ integer part of a measured phase offest value.
+ Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
+ fractional part of a measured phase offest value.
attribute-sets:
-
@@ -272,6 +284,18 @@ attribute-sets:
type: nest
multi-attr: true
nested-attributes: pin-parent-pin
+ -
+ name: phase-adjust-min
+ type: s32
+ -
+ name: phase-adjust-max
+ type: s32
+ -
+ name: phase-adjust
+ type: s32
+ -
+ name: phase-offset
+ type: s64
-
name: pin-parent-device
subset-of: pin
@@ -288,6 +312,9 @@ attribute-sets:
-
name: state
type: u32
+ -
+ name: phase-offset
+ type: s64
-
name: pin-parent-pin
subset-of: pin
@@ -439,6 +466,9 @@ operations:
- capabilities
- parent-device
- parent-pin
+ - phase-adjust-min
+ - phase-adjust-max
+ - phase-adjust
dump:
pre: dpll-lock-dumpit
@@ -466,6 +496,7 @@ operations:
- state
- parent-device
- parent-pin
+ - phase-adjust
-
name: pin-create-ntf
doc: Notification about pin appearing
diff --git a/drivers/dpll/dpll_nl.c b/drivers/dpll/dpll_nl.c
index 14064c8c783b..eaee5be7aa64 100644
--- a/drivers/dpll/dpll_nl.c
+++ b/drivers/dpll/dpll_nl.c
@@ -11,11 +11,12 @@
#include <uapi/linux/dpll.h>
/* Common nested types */
-const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_STATE + 1] = {
+const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1] = {
[DPLL_A_PIN_PARENT_ID] = { .type = NLA_U32, },
[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
[DPLL_A_PIN_PRIO] = { .type = NLA_U32, },
[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
+ [DPLL_A_PIN_PHASE_OFFSET] = { .type = NLA_S64, },
};
const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1] = {
@@ -61,7 +62,7 @@ static const struct nla_policy dpll_pin_get_dump_nl_policy[DPLL_A_PIN_ID + 1] =
};
/* DPLL_CMD_PIN_SET - do */
-static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_PIN + 1] = {
+static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PHASE_ADJUST + 1] = {
[DPLL_A_PIN_ID] = { .type = NLA_U32, },
[DPLL_A_PIN_FREQUENCY] = { .type = NLA_U64, },
[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
@@ -69,6 +70,7 @@ static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_PIN + 1]
[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
[DPLL_A_PIN_PARENT_DEVICE] = NLA_POLICY_NESTED(dpll_pin_parent_device_nl_policy),
[DPLL_A_PIN_PARENT_PIN] = NLA_POLICY_NESTED(dpll_pin_parent_pin_nl_policy),
+ [DPLL_A_PIN_PHASE_ADJUST] = { .type = NLA_S32, },
};
/* Ops table for dpll */
@@ -140,7 +142,7 @@ static const struct genl_split_ops dpll_nl_ops[] = {
.doit = dpll_nl_pin_set_doit,
.post_doit = dpll_pin_post_doit,
.policy = dpll_pin_set_nl_policy,
- .maxattr = DPLL_A_PIN_PARENT_PIN,
+ .maxattr = DPLL_A_PIN_PHASE_ADJUST,
.flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
},
};
diff --git a/drivers/dpll/dpll_nl.h b/drivers/dpll/dpll_nl.h
index 1f67aaed4742..92d4c9c4f788 100644
--- a/drivers/dpll/dpll_nl.h
+++ b/drivers/dpll/dpll_nl.h
@@ -12,7 +12,7 @@
#include <uapi/linux/dpll.h>
/* Common nested types */
-extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_STATE + 1];
+extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1];
extern const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1];
int dpll_lock_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index 20ef0718f8dc..050f51b48ef8 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -7,7 +7,7 @@
#define _UAPI_LINUX_DPLL_H
#define DPLL_FAMILY_NAME "dpll"
-#define DPLL_FAMILY_VERSION 1
+#define DPLL_FAMILY_VERSION 2
/**
* enum dpll_mode - working modes a dpll can support, differentiates if and how
@@ -138,6 +138,8 @@ enum dpll_pin_capabilities {
DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE = 4,
};
+#define DPLL_PHASE_OFFSET_DIVIDER 1000
+
enum dpll_a {
DPLL_A_ID = 1,
DPLL_A_MODULE_NAME,
@@ -173,6 +175,10 @@ enum dpll_a_pin {
DPLL_A_PIN_CAPABILITIES,
DPLL_A_PIN_PARENT_DEVICE,
DPLL_A_PIN_PARENT_PIN,
+ DPLL_A_PIN_PHASE_ADJUST_MIN,
+ DPLL_A_PIN_PHASE_ADJUST_MAX,
+ DPLL_A_PIN_PHASE_ADJUST,
+ DPLL_A_PIN_PHASE_OFFSET,
__DPLL_A_PIN_MAX,
DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
--
2.38.1
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
next prev parent reply other threads:[~2023-10-06 11:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-06 11:40 [Intel-wired-lan] [PATCH net-next v3 0/5] dpll: add phase-offset and phase-adjust Arkadiusz Kubalewski
2023-10-06 11:40 ` [Intel-wired-lan] [PATCH net-next v3 1/5] dpll: docs: add support for pin signal phase offset/adjust Arkadiusz Kubalewski
2023-10-06 11:40 ` Arkadiusz Kubalewski [this message]
2023-10-06 12:30 ` [Intel-wired-lan] [PATCH net-next v3 2/5] dpll: spec: add support for pin-dpll " Jiri Pirko
2023-10-06 14:55 ` Jakub Kicinski
2023-10-06 16:53 ` Jiri Pirko
2023-10-06 19:44 ` Kuba Kicinski
2023-10-07 10:29 ` Jiri Pirko
2023-10-09 15:22 ` Jakub Kicinski
2023-10-09 22:55 ` Kubalewski, Arkadiusz
2023-10-06 11:40 ` [Intel-wired-lan] [PATCH net-next v3 3/5] dpll: netlink/core: " Arkadiusz Kubalewski
2023-10-06 12:38 ` Jiri Pirko
2023-10-09 22:49 ` Kubalewski, Arkadiusz
2023-10-06 11:41 ` [Intel-wired-lan] [PATCH net-next v3 4/5] ice: dpll: implement phase related callbacks Arkadiusz Kubalewski
2023-10-06 12:33 ` Simon Horman
2023-10-06 12:41 ` Jiri Pirko
2023-10-06 11:41 ` [Intel-wired-lan] [PATCH net-next v3 5/5] dpll: netlink/core: change pin frequency set behavior Arkadiusz Kubalewski
2023-10-06 12:35 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231006114101.1608796-3-arkadiusz.kubalewski@intel.com \
--to=arkadiusz.kubalewski@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jesse.brandeburg@intel.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox