From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org, suraj.kandpal@intel.com,
ville.syrjala@linux.intel.com
Subject: [PATCH 04/15] drm/i915/display: Modify debugfs for joiner to force n pipes
Date: Wed, 18 Sep 2024 20:13:32 +0530 [thread overview]
Message-ID: <20240918144343.2876184-5-ankit.k.nautiyal@intel.com> (raw)
In-Reply-To: <20240918144343.2876184-1-ankit.k.nautiyal@intel.com>
At the moment, the debugfs for joiner allows only to force enable/disable
pipe joiner for 2 pipes. Modify it to force join 'n' number of pipes,
where n is a valid pipe joiner configuration.
This will help in case of ultra joiner where 4 pipes are joined.
v2:
-Fix commit message to state that only valid joiner config can be
forced. (Suraj)
-Rename the identifiers to have INTEL_BIG/NONE_JOINER_PIPES. (Suraj)
v3:
-Avoid enum for joiner pipe counts, use bare numbers for better
readability. (Ville)
-Remove redundant prints from debugfs. (Ville)
v4:
-Return -EINVAL if joiner forced to an invalid value.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 63 ++++++++++++++++++-
.../drm/i915/display/intel_display_types.h | 2 +-
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
3 files changed, 63 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index cda3f6cf724d..5775413c6763 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -1504,6 +1504,65 @@ static int intel_crtc_pipe_show(struct seq_file *m, void *unused)
}
DEFINE_SHOW_ATTRIBUTE(intel_crtc_pipe);
+static int i915_joiner_show(struct seq_file *m, void *data)
+{
+ struct intel_connector *connector = m->private;
+
+ seq_printf(m, "%d\n", connector->force_joined_pipes);
+
+ return 0;
+}
+
+static ssize_t i915_joiner_write(struct file *file,
+ const char __user *ubuf,
+ size_t len, loff_t *offp)
+{
+ struct seq_file *m = file->private_data;
+ struct intel_connector *connector = m->private;
+ struct intel_display *display = to_intel_display(connector);
+ int force_join_pipes = 0;
+ int ret;
+
+ if (len == 0)
+ return 0;
+
+ ret = kstrtoint_from_user(ubuf, len, 0, &force_join_pipes);
+ if (ret < 0)
+ return ret;
+
+ switch (force_join_pipes) {
+ case 0:
+ fallthrough;
+ case 2:
+ connector->force_joined_pipes = force_join_pipes;
+ break;
+ default:
+ drm_dbg(display->drm, "Ignoring Invalid num of pipes %d for force joining\n",
+ force_join_pipes);
+ connector->force_joined_pipes = 0;
+
+ return -EINVAL;
+ }
+
+ *offp += len;
+
+ return len;
+}
+
+static int i915_joiner_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, i915_joiner_show, inode->i_private);
+}
+
+static const struct file_operations i915_joiner_fops = {
+ .owner = THIS_MODULE,
+ .open = i915_joiner_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = i915_joiner_write
+};
+
/**
* intel_connector_debugfs_add - add i915 specific connector debugfs files
* @connector: pointer to a registered intel_connector
@@ -1554,8 +1613,8 @@ void intel_connector_debugfs_add(struct intel_connector *connector)
if (HAS_BIGJOINER(i915) && intel_dp_has_joiner(intel_dp) &&
(connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
connector_type == DRM_MODE_CONNECTOR_eDP)) {
- debugfs_create_bool("i915_bigjoiner_force_enable", 0644, root,
- &connector->force_bigjoiner_enable);
+ debugfs_create_file("i915_joiner_force_enable", 0644, root,
+ connector, &i915_joiner_fops);
}
if (connector_type == DRM_MODE_CONNECTOR_DSI ||
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 000ab373c887..2ac2068aefa4 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -524,7 +524,7 @@ struct intel_connector {
struct intel_dp *mst_port;
- bool force_bigjoiner_enable;
+ int force_joined_pipes;
struct {
struct drm_dp_aux *dsc_decompression_aux;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 19f78432cc8f..2e35a81fa6d1 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1280,7 +1280,7 @@ bool intel_dp_need_joiner(struct intel_dp *intel_dp,
return false;
return clock > i915->display.cdclk.max_dotclk_freq || hdisplay > 5120 ||
- connector->force_bigjoiner_enable;
+ connector->force_joined_pipes == 2;
}
bool intel_dp_has_dsc(const struct intel_connector *connector)
--
2.45.2
next prev parent reply other threads:[~2024-09-18 14:42 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 14:43 [PATCH 00/15] Ultrajoiner basic functionality series Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 01/15] drm/i915: Add some essential functionality for joiners Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 02/15] drm/i915/display: Enhance iterators for modeset en/disable Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 03/15] drm/i915/display_debugfs: Allow force joiner only if supported Ankit Nautiyal
2024-09-19 15:04 ` Ville Syrjälä
2024-09-18 14:43 ` Ankit Nautiyal [this message]
2024-09-19 15:07 ` [PATCH 04/15] drm/i915/display: Modify debugfs for joiner to force n pipes Ville Syrjälä
2024-09-18 14:43 ` [PATCH 05/15] drm/i915/dp: Add helper to compute num pipes required Ankit Nautiyal
2024-09-19 15:12 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 06/15] drm/i915/display: Add debugfs support to avoid joiner Ankit Nautiyal
2024-09-19 15:15 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 07/15] drm/i915: Split current joiner hw state readout Ankit Nautiyal
2024-09-19 15:18 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 08/15] drm/i915: Add bigjoiner and uncompressed joiner hw readout sanity checks Ankit Nautiyal
2024-09-19 15:22 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 09/15] drm/i915/display: Add macro HAS_ULTRAJOINER() Ankit Nautiyal
2024-09-19 15:24 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 10/15] drm/i915: Implement hw state readout and checks for ultrajoiner Ankit Nautiyal
2024-09-19 15:33 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 11/15] drm/i915/display: Refactor enable_joiner_pipes Ankit Nautiyal
2024-09-19 18:02 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 12/15] drm/i915/display/vdsc: Add ultrajoiner support with DSC Ankit Nautiyal
2024-09-19 18:06 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 13/15] drm/i915: Compute config and mode valid changes for ultrajoiner Ankit Nautiyal
2024-09-19 18:30 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 14/15] drm/i915/display: Consider ultrajoiner for computing maxdotclock Ankit Nautiyal
2024-09-19 18:42 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 15/15] drm/i915/intel_dp: Add support for forcing ultrajoiner Ankit Nautiyal
2024-09-19 18:45 ` Ville Syrjälä
2024-09-18 16:28 ` ✓ CI.Patch_applied: success for Ultrajoiner basic functionality series Patchwork
2024-09-18 16:29 ` ✗ CI.checkpatch: warning " Patchwork
2024-09-18 16:30 ` ✓ CI.KUnit: success " Patchwork
2024-09-18 16:42 ` ✓ CI.Build: " Patchwork
2024-09-18 16:44 ` ✓ CI.Hooks: " Patchwork
2024-09-18 16:46 ` ✗ CI.checksparse: warning " Patchwork
2024-09-18 17:10 ` ✓ CI.BAT: success " Patchwork
2024-09-19 1:52 ` ✗ CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240918144343.2876184-5-ankit.k.nautiyal@intel.com \
--to=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=suraj.kandpal@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox