From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org, suraj.kandpal@intel.com,
jani.nikula@linux.intel.com
Subject: [PATCH 7/7] drm/i915/dp: Set the DSC link limits intel_dp_compute_config_link_bpp_limits
Date: Thu, 3 Oct 2024 16:13:43 +0530 [thread overview]
Message-ID: <20241003104343.984060-8-ankit.k.nautiyal@intel.com> (raw)
In-Reply-To: <20241003104343.984060-1-ankit.k.nautiyal@intel.com>
The helper intel_dp_compute_config_link_bpp_limits is the correct place
to set the DSC link limits. Move the code to this function and remove
the #TODO item.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 64 +++++++++++++------------
drivers/gpu/drm/i915/display/intel_dp.h | 4 +-
2 files changed, 35 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 02009ae03840..bfc31b3af864 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1958,7 +1958,7 @@ static int dsc_compute_link_config(struct intel_dp *intel_dp,
static
u16 intel_dp_dsc_max_sink_compressed_bppx16(const struct intel_connector *connector,
- struct intel_crtc_state *pipe_config,
+ const struct intel_crtc_state *pipe_config,
int bpc)
{
u16 max_bppx16 = drm_edp_dsc_sink_output_bpp(connector->dp.dsc_dpcd);
@@ -1983,7 +1983,7 @@ u16 intel_dp_dsc_max_sink_compressed_bppx16(const struct intel_connector *connec
return 0;
}
-int intel_dp_dsc_sink_min_compressed_bpp(struct intel_crtc_state *pipe_config)
+int intel_dp_dsc_sink_min_compressed_bpp(const struct intel_crtc_state *pipe_config)
{
/* From Mandatory bit rate range Support Table 2-157 (DP v2.0) */
switch (pipe_config->output_format) {
@@ -2001,7 +2001,7 @@ int intel_dp_dsc_sink_min_compressed_bpp(struct intel_crtc_state *pipe_config)
}
int intel_dp_dsc_sink_max_compressed_bpp(const struct intel_connector *connector,
- struct intel_crtc_state *pipe_config,
+ const struct intel_crtc_state *pipe_config,
int bpc)
{
return intel_dp_dsc_max_sink_compressed_bppx16(connector,
@@ -2130,21 +2130,16 @@ static int dsc_compute_compressed_bpp(struct intel_dp *intel_dp,
{
const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
- int dsc_src_min_bpp, dsc_sink_min_bpp, dsc_min_bpp;
- int dsc_src_max_bpp, dsc_sink_max_bpp, dsc_max_bpp;
+ int dsc_min_bpp;
+ int dsc_max_bpp;
int dsc_joiner_max_bpp;
int num_joined_pipes = intel_crtc_num_joined_pipes(pipe_config);
- dsc_src_min_bpp = dsc_src_min_compressed_bpp();
- dsc_sink_min_bpp = intel_dp_dsc_sink_min_compressed_bpp(pipe_config);
- dsc_min_bpp = max(dsc_src_min_bpp, dsc_sink_min_bpp);
- dsc_min_bpp = max(dsc_min_bpp, fxp_q4_to_int_roundup(limits->link.min_bpp_x16));
+ dsc_min_bpp = fxp_q4_to_int_roundup(limits->link.min_bpp_x16);
- dsc_src_max_bpp = dsc_src_max_compressed_bpp(intel_dp);
- dsc_sink_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector,
- pipe_config,
- pipe_bpp / 3);
- dsc_max_bpp = dsc_sink_max_bpp ? min(dsc_sink_max_bpp, dsc_src_max_bpp) : dsc_src_max_bpp;
+ dsc_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector,
+ pipe_config,
+ pipe_bpp / 3);
dsc_joiner_max_bpp = get_max_compressed_bpp_with_joiner(i915, adjusted_mode->clock,
adjusted_mode->hdisplay,
@@ -2255,8 +2250,8 @@ static int intel_edp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp,
struct intel_connector *connector =
to_intel_connector(conn_state->connector);
int pipe_bpp, forced_bpp;
- int dsc_src_min_bpp, dsc_sink_min_bpp, dsc_min_bpp;
- int dsc_src_max_bpp, dsc_sink_max_bpp, dsc_max_bpp;
+ int dsc_min_bpp;
+ int dsc_max_bpp;
forced_bpp = intel_dp_force_dsc_pipe_bpp(intel_dp, limits);
@@ -2276,16 +2271,12 @@ static int intel_edp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp,
pipe_config->port_clock = limits->max_rate;
pipe_config->lane_count = limits->max_lane_count;
- dsc_src_min_bpp = dsc_src_min_compressed_bpp();
- dsc_sink_min_bpp = intel_dp_dsc_sink_min_compressed_bpp(pipe_config);
- dsc_min_bpp = max(dsc_src_min_bpp, dsc_sink_min_bpp);
- dsc_min_bpp = max(dsc_min_bpp, fxp_q4_to_int_roundup(limits->link.min_bpp_x16));
+ dsc_min_bpp = fxp_q4_to_int_roundup(limits->link.min_bpp_x16);
+
+ dsc_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector,
+ pipe_config,
+ pipe_bpp / 3);
- dsc_src_max_bpp = dsc_src_max_compressed_bpp(intel_dp);
- dsc_sink_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector,
- pipe_config,
- pipe_bpp / 3);
- dsc_max_bpp = dsc_sink_max_bpp ? min(dsc_sink_max_bpp, dsc_src_max_bpp) : dsc_src_max_bpp;
dsc_max_bpp = min(dsc_max_bpp, fxp_q4_to_int(limits->link.max_bpp_x16));
/* Compressed BPP should be less than the Input DSC bpp */
@@ -2428,6 +2419,7 @@ intel_dp_compute_config_link_bpp_limits(struct intel_dp *intel_dp,
&crtc_state->hw.adjusted_mode;
const struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
const struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+ struct intel_connector *connector = intel_dp->attached_connector;
int max_link_bpp_x16;
max_link_bpp_x16 = min(crtc_state->max_link_bpp_x16,
@@ -2441,12 +2433,22 @@ intel_dp_compute_config_link_bpp_limits(struct intel_dp *intel_dp,
limits->link.min_bpp_x16 = fxp_q4_from_int(limits->pipe.min_bpp);
} else {
- /*
- * TODO: set the DSC link limits already here, atm these are
- * initialized only later in intel_edp_dsc_compute_pipe_bpp() /
- * intel_dp_dsc_compute_pipe_bpp()
- */
- limits->link.min_bpp_x16 = 0;
+ int dsc_src_min_bpp, dsc_sink_min_bpp, dsc_min_bpp;
+ int dsc_src_max_bpp, dsc_sink_max_bpp, dsc_max_bpp;
+
+ dsc_src_min_bpp = dsc_src_min_compressed_bpp();
+ dsc_sink_min_bpp = intel_dp_dsc_sink_min_compressed_bpp(crtc_state);
+ dsc_min_bpp = max(dsc_src_min_bpp, dsc_sink_min_bpp);
+ limits->link.min_bpp_x16 = fxp_q4_from_int(dsc_min_bpp);
+
+ dsc_src_max_bpp = dsc_src_max_compressed_bpp(intel_dp);
+ dsc_sink_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector,
+ crtc_state,
+ limits->pipe.max_bpp / 3);
+ dsc_max_bpp = dsc_sink_max_bpp ?
+ min(dsc_sink_max_bpp, dsc_src_max_bpp) : dsc_src_max_bpp;
+
+ max_link_bpp_x16 = min(max_link_bpp_x16, fxp_q4_from_int(dsc_max_bpp));
}
limits->link.max_bpp_x16 = max_link_bpp_x16;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index 8bd0bb4ec0e1..d4ca00ba49b4 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -145,9 +145,9 @@ u16 intel_dp_dsc_get_max_compressed_bpp(struct drm_i915_private *i915,
enum intel_output_format output_format,
u32 pipe_bpp,
u32 timeslots);
-int intel_dp_dsc_sink_min_compressed_bpp(struct intel_crtc_state *pipe_config);
+int intel_dp_dsc_sink_min_compressed_bpp(const struct intel_crtc_state *pipe_config);
int intel_dp_dsc_sink_max_compressed_bpp(const struct intel_connector *connector,
- struct intel_crtc_state *pipe_config,
+ const struct intel_crtc_state *pipe_config,
int bpc);
u8 intel_dp_dsc_get_slice_count(const struct intel_connector *connector,
int mode_clock, int mode_hdisplay,
--
2.45.2
next prev parent reply other threads:[~2024-10-03 10:42 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 10:43 [PATCH 0/7] DP DSC min/max src bpc fixes Ankit Nautiyal
2024-10-03 10:43 ` [PATCH 1/7] drm/i915/dp: Use HAS_DSC macro in intel_dp_dsc_max_src_input_bpc Ankit Nautiyal
2024-10-03 11:04 ` Kandpal, Suraj
2024-10-17 12:13 ` Imre Deak
2024-11-15 8:10 ` Nautiyal, Ankit K
2024-10-03 10:43 ` [PATCH 2/7] drm/i915/dp: Return int from dsc_max/min_src_input_bpc helpers Ankit Nautiyal
2024-10-03 10:43 ` [PATCH 3/7] drm/i915/dp_mst: Use helpers to get dsc min/max input bpc Ankit Nautiyal
2024-10-03 10:43 ` [PATCH 4/7] drm/i915/dp: Drop max_requested_bpc for dsc pipe_min/max bpp Ankit Nautiyal
2024-10-13 15:35 ` Kandpal, Suraj
2024-10-03 10:43 ` [PATCH 5/7] drm/i915/dp: Refactor pipe_bpp limits with dsc Ankit Nautiyal
2024-10-13 15:37 ` Kandpal, Suraj
2024-10-17 12:20 ` Imre Deak
2024-11-15 8:13 ` Nautiyal, Ankit K
2024-11-15 8:25 ` Nautiyal, Ankit K
2024-10-03 10:43 ` [PATCH 6/7] drm/i915/dp: Use clamp for pipe_bpp limits with DSC Ankit Nautiyal
2024-10-13 15:39 ` Kandpal, Suraj
2024-10-03 10:43 ` Ankit Nautiyal [this message]
2024-10-13 15:46 ` [PATCH 7/7] drm/i915/dp: Set the DSC link limits intel_dp_compute_config_link_bpp_limits Kandpal, Suraj
2024-10-15 6:15 ` Kandpal, Suraj
2024-10-17 12:42 ` Imre Deak
2024-11-15 8:28 ` Nautiyal, Ankit K
2024-10-03 10:49 ` ✓ CI.Patch_applied: success for DP DSC min/max src bpc fixes Patchwork
2024-10-03 10:49 ` ✓ CI.checkpatch: " Patchwork
2024-10-03 10:50 ` ✓ CI.KUnit: " Patchwork
2024-10-03 11:03 ` ✓ CI.Build: " Patchwork
2024-10-03 11:05 ` ✓ CI.Hooks: " Patchwork
2024-10-03 11:07 ` ✗ CI.checksparse: warning " Patchwork
2024-10-03 11:31 ` ✓ CI.BAT: success " Patchwork
2024-10-03 12:30 ` ✗ CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241003104343.984060-8-ankit.k.nautiyal@intel.com \
--to=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox