Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: ankit.k.nautiyal@intel.com, ville.syrjala@intel.com
Subject: [PATCH v5 14/17] drm/i915/vrr: Pause DC Balancing for DSB commits
Date: Tue, 13 May 2025 10:46:57 +0530	[thread overview]
Message-ID: <20250513051700.507389-15-mitulkumar.ajitkumar.golani@intel.com> (raw)
In-Reply-To: <20250513051700.507389-1-mitulkumar.ajitkumar.golani@intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Pause the DMC DC Balancing for the remainder of the
commit so that vmin/vmax won't change after we've baked
them into the DSB vblank evasion commands.

--v2:
- Remove typo. (Ankit)
- Separate vrr enable structuring. (Ankit)

--v3:
- Add gaurd before accessing DC balance bits.
- Remove redundancy checks.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 17 +++++++++++++++++
 drivers/gpu/drm/i915/display/intel_vrr.c     |  9 +++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index c06047a8bf1b..d1a2e694b6a1 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7217,6 +7217,21 @@ static void intel_atomic_dsb_finish(struct intel_atomic_state *state,
 	}
 
 	if (new_crtc_state->use_dsb) {
+		if (new_crtc_state->vrr.dc_balance.enable) {
+			/*
+			 * Pause the DMC DC balancing for the remainder of
+			 * the commit so that vmin/vmax won't change after
+			 * we've baked them into the DSB vblank evasion
+			 * commands.
+			 *
+			 * FIXME maybe need a small delay here to make sure
+			 * DMC has finished updating the values? Or we need
+			 * a better DMC<->driver protocol that gives is real
+			 * guarantees about that...
+			 */
+			intel_pipedmc_dcb_disable(NULL, crtc);
+		}
+
 		if (intel_crtc_needs_color_update(new_crtc_state))
 			intel_color_commit_noarm(new_crtc_state->dsb_commit,
 						 new_crtc_state);
@@ -7253,6 +7268,8 @@ static void intel_atomic_dsb_finish(struct intel_atomic_state *state,
 			intel_vrr_send_push(new_crtc_state->dsb_commit, new_crtc_state);
 			intel_dsb_wait_vblank_delay(state, new_crtc_state->dsb_commit);
 			intel_vrr_check_push_sent(new_crtc_state->dsb_commit, new_crtc_state);
+			if (new_crtc_state->vrr.dc_balance.enable)
+				intel_pipedmc_dcb_enable(new_crtc_state->dsb_commit, crtc);
 			intel_dsb_interrupt(new_crtc_state->dsb_commit);
 		}
 	}
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index 88ac4d93586b..3a5d29327d4d 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -9,6 +9,7 @@
 #include "i915_reg.h"
 #include "intel_de.h"
 #include "intel_display_types.h"
+#include "intel_dmc.h"
 #include "intel_dp.h"
 #include "intel_dmc_regs.h"
 #include "intel_vrr.h"
@@ -602,6 +603,7 @@ bool intel_vrr_always_use_vrr_tg(struct intel_display *display)
 void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 	u32 ctl;
 
@@ -640,17 +642,24 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
 		ctl |= VRR_CTL_CMRR_ENABLE;
 
 	intel_de_write(display, TRANS_VRR_CTL(display, cpu_transcoder), ctl);
+
+	if (crtc_state->vrr.dc_balance.enable)
+		intel_pipedmc_dcb_enable(NULL, crtc);
 }
 
 void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
 {
 	struct intel_display *display = to_intel_display(old_crtc_state);
+	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
 	enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
 	u32 ctl;
 
 	if (!old_crtc_state->vrr.enable)
 		return;
 
+	if (old_crtc_state->vrr.dc_balance.enable)
+		intel_pipedmc_dcb_disable(NULL, crtc);
+
 	ctl = trans_vrr_ctl(old_crtc_state);
 	if (intel_vrr_always_use_vrr_tg(display))
 		ctl |= VRR_CTL_VRR_ENABLE;
-- 
2.48.1


  parent reply	other threads:[~2025-05-13  5:19 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-13  5:16 [PATCH v5 00/17] Enable/Disable DC balance along with VRR DSB Mitul Golani
2025-05-13  5:16 ` [PATCH v5 01/17] drm/i915/vrr: Refactor vmin/vmax stuff Mitul Golani
2025-05-13  5:16 ` [PATCH v5 02/17] drm/i915/display: Add source param for dc balance Mitul Golani
2025-05-13  5:16 ` [PATCH v5 03/17] drm/i915/display: Add pipe dmc registers and bits for DC Balance Mitul Golani
2025-05-30  6:22   ` Nautiyal, Ankit K
2025-05-13  5:16 ` [PATCH v5 04/17] drm/i915/display: Add VRR DC balance registers Mitul Golani
2025-05-13  7:15   ` Jani Nikula
2025-05-13  5:16 ` [PATCH v5 05/17] drm/i915/vrr: Add functions to read out vmin/vmax stuff Mitul Golani
2025-05-13  5:16 ` [PATCH v5 06/17] drm/i915/vrr: Add DC Balance params to crtc_state Mitul Golani
2025-05-13  5:16 ` [PATCH v5 07/17] drm/i915/vrr: Add state dump for DC Balance params Mitul Golani
2025-05-13  5:16 ` [PATCH v5 08/17] drm/i915/vrr: Add compute config " Mitul Golani
2025-05-13  5:16 ` [PATCH v5 09/17] drm/i915/vrr: Write DC balance params to hw registers Mitul Golani
2025-05-27  6:17   ` Nautiyal, Ankit K
2025-05-13  5:16 ` [PATCH v5 10/17] drm/i915: Extract vrr_vblank_start() Mitul Golani
2025-05-13  5:16 ` [PATCH v5 11/17] drm/i915/vrr: Implement vblank evasion with DC balancing Mitul Golani
2025-05-13  5:16 ` [PATCH v5 12/17] drm/i915/dsb: Add pipedmc dc balance enable/disable Mitul Golani
2025-05-13  5:16 ` [PATCH v5 13/17] drm/i915/vrr: Restructure VRR enablement bit Mitul Golani
2025-05-13  5:16 ` Mitul Golani [this message]
2025-05-13  5:16 ` [PATCH v5 15/17] drm/i915/vrr: Add function to check if DC Balance Possible Mitul Golani
2025-05-13  5:16 ` [PATCH v5 16/17] drm/i915/display: Add function to configure PIPEDMC_EVT_CTL Mitul Golani
2025-05-13  5:17 ` [PATCH v5 17/17] drm/i915/vrr: Enable DC Balance bit Mitul Golani
2025-05-13  5:24 ` ✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev5) Patchwork
2025-05-13  5:25 ` ✗ CI.checkpatch: warning " Patchwork
2025-05-13  5:26 ` ✓ CI.KUnit: success " Patchwork
2025-05-13  5:36 ` ✗ CI.Build: failure " Patchwork
2025-05-13 15:51 ` ✓ CI.Patch_applied: success " Patchwork
2025-05-13 15:51 ` ✗ CI.checkpatch: warning " Patchwork
2025-05-13 15:52 ` ✓ CI.KUnit: success " Patchwork
2025-05-13 16:10 ` ✓ CI.Build: " Patchwork
2025-05-14 17:24 ` ✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev6) Patchwork
2025-05-14 17:24 ` ✗ CI.checkpatch: warning " Patchwork
2025-05-14 17:25 ` ✓ CI.KUnit: success " Patchwork
2025-05-14 17:36 ` ✓ CI.Build: " Patchwork
2025-05-14 17:38 ` ✓ CI.Hooks: " Patchwork
2025-05-14 17:40 ` ✗ CI.checksparse: warning " Patchwork
2025-05-14 18:02 ` ✓ Xe.CI.BAT: success " Patchwork
2025-05-15  1:36 ` ✓ Xe.CI.Full: " Patchwork
2025-05-27  0:39 ` ✗ CI.Patch_applied: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250513051700.507389-15-mitulkumar.ajitkumar.golani@intel.com \
    --to=mitulkumar.ajitkumar.golani@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox