Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: ankit.k.nautiyal@intel.com, ville.syrjala@intel.com
Subject: [PATCH v5 16/17] drm/i915/display: Add function to configure PIPEDMC_EVT_CTL
Date: Tue, 13 May 2025 10:46:59 +0530	[thread overview]
Message-ID: <20250513051700.507389-17-mitulkumar.ajitkumar.golani@intel.com> (raw)
In-Reply-To: <20250513051700.507389-1-mitulkumar.ajitkumar.golani@intel.com>

Configure PIPEDMC_EVT_CTL_3 register with required event flags.

Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dmc.c | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dmc.h |  2 ++
 drivers/gpu/drm/i915/display/intel_vrr.c | 11 +++++++++--
 3 files changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c b/drivers/gpu/drm/i915/display/intel_dmc.c
index 593f5140475b..077bb6bb0bb4 100644
--- a/drivers/gpu/drm/i915/display/intel_dmc.c
+++ b/drivers/gpu/drm/i915/display/intel_dmc.c
@@ -534,6 +534,26 @@ void intel_dmc_block_pkgc(struct intel_display *display, enum pipe pipe,
 		     PIPEDMC_BLOCK_PKGC_SW_BLOCK_PKGC_ALWAYS : 0);
 }
 
+void intel_dmc_configure_dc_balance_ctl_regs(struct intel_display *display,
+					     enum pipe pipe, bool enable)
+{
+	u32 val;
+
+	if (enable)
+		val = DMC_EVT_CTL_ENABLE | DMC_EVT_CTL_RECURRING |
+			REG_FIELD_PREP(DMC_EVT_CTL_TYPE_MASK,
+				       DMC_EVT_CTL_TYPE_EDGE_0_1) |
+			REG_FIELD_PREP(DMC_EVT_CTL_EVENT_ID_MASK,
+				       DMC_EVT_CTL_EVENT_ID_ADAPTIVE_DC_BALANCE_TRIGGER);
+	else
+		val = REG_FIELD_PREP(DMC_EVT_CTL_EVENT_ID_MASK,
+				     DMC_EVT_CTL_EVENT_ID_FALSE) |
+		      REG_FIELD_PREP(DMC_EVT_CTL_TYPE_MASK,
+				     DMC_EVT_CTL_TYPE_EDGE_0_1);
+
+	intel_de_write(display, PIPEDMC_EVT_CTL_3(pipe), val);
+}
+
 /**
  * intel_dmc_start_pkgc_exit_at_start_of_undelayed_vblank() - start of PKG
  * C-state exit
diff --git a/drivers/gpu/drm/i915/display/intel_dmc.h b/drivers/gpu/drm/i915/display/intel_dmc.h
index 48869f19079a..a998c3614e1c 100644
--- a/drivers/gpu/drm/i915/display/intel_dmc.h
+++ b/drivers/gpu/drm/i915/display/intel_dmc.h
@@ -22,6 +22,8 @@ void intel_dmc_enable_pipe(struct intel_display *display, enum pipe pipe);
 void intel_dmc_disable_pipe(struct intel_display *display, enum pipe pipe);
 void intel_dmc_block_pkgc(struct intel_display *display, enum pipe pipe,
 			  bool block);
+void intel_dmc_configure_dc_balance_ctl_regs(struct intel_display *display,
+					     enum pipe pipe, bool enable);
 void intel_dmc_start_pkgc_exit_at_start_of_undelayed_vblank(struct intel_display *display,
 							    enum pipe pipe, bool enable);
 void intel_dmc_fini(struct intel_display *display);
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index cd14d7efb863..5ca71df79430 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -620,7 +620,9 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	enum pipe pipe = crtc->pipe;
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
 	u32 ctl;
 
 	if (!crtc_state->vrr.enable)
@@ -659,22 +661,27 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
 
 	intel_de_write(display, TRANS_VRR_CTL(display, cpu_transcoder), ctl);
 
-	if (crtc_state->vrr.dc_balance.enable)
+	if (crtc_state->vrr.dc_balance.enable) {
+		intel_dmc_configure_dc_balance_ctl_regs(display, pipe, true);
 		intel_pipedmc_dcb_enable(NULL, crtc);
+	}
 }
 
 void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
 {
 	struct intel_display *display = to_intel_display(old_crtc_state);
 	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
+	enum pipe pipe = crtc->pipe;
 	enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
 	u32 ctl;
 
 	if (!old_crtc_state->vrr.enable)
 		return;
 
-	if (old_crtc_state->vrr.dc_balance.enable)
+	if (old_crtc_state->vrr.dc_balance.enable) {
 		intel_pipedmc_dcb_disable(NULL, crtc);
+		intel_dmc_configure_dc_balance_ctl_regs(display, pipe, false);
+	}
 
 	ctl = trans_vrr_ctl(old_crtc_state);
 	if (intel_vrr_always_use_vrr_tg(display))
-- 
2.48.1


  parent reply	other threads:[~2025-05-13  5:19 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-13  5:16 [PATCH v5 00/17] Enable/Disable DC balance along with VRR DSB Mitul Golani
2025-05-13  5:16 ` [PATCH v5 01/17] drm/i915/vrr: Refactor vmin/vmax stuff Mitul Golani
2025-05-13  5:16 ` [PATCH v5 02/17] drm/i915/display: Add source param for dc balance Mitul Golani
2025-05-13  5:16 ` [PATCH v5 03/17] drm/i915/display: Add pipe dmc registers and bits for DC Balance Mitul Golani
2025-05-30  6:22   ` Nautiyal, Ankit K
2025-05-13  5:16 ` [PATCH v5 04/17] drm/i915/display: Add VRR DC balance registers Mitul Golani
2025-05-13  7:15   ` Jani Nikula
2025-05-13  5:16 ` [PATCH v5 05/17] drm/i915/vrr: Add functions to read out vmin/vmax stuff Mitul Golani
2025-05-13  5:16 ` [PATCH v5 06/17] drm/i915/vrr: Add DC Balance params to crtc_state Mitul Golani
2025-05-13  5:16 ` [PATCH v5 07/17] drm/i915/vrr: Add state dump for DC Balance params Mitul Golani
2025-05-13  5:16 ` [PATCH v5 08/17] drm/i915/vrr: Add compute config " Mitul Golani
2025-05-13  5:16 ` [PATCH v5 09/17] drm/i915/vrr: Write DC balance params to hw registers Mitul Golani
2025-05-27  6:17   ` Nautiyal, Ankit K
2025-05-13  5:16 ` [PATCH v5 10/17] drm/i915: Extract vrr_vblank_start() Mitul Golani
2025-05-13  5:16 ` [PATCH v5 11/17] drm/i915/vrr: Implement vblank evasion with DC balancing Mitul Golani
2025-05-13  5:16 ` [PATCH v5 12/17] drm/i915/dsb: Add pipedmc dc balance enable/disable Mitul Golani
2025-05-13  5:16 ` [PATCH v5 13/17] drm/i915/vrr: Restructure VRR enablement bit Mitul Golani
2025-05-13  5:16 ` [PATCH v5 14/17] drm/i915/vrr: Pause DC Balancing for DSB commits Mitul Golani
2025-05-13  5:16 ` [PATCH v5 15/17] drm/i915/vrr: Add function to check if DC Balance Possible Mitul Golani
2025-05-13  5:16 ` Mitul Golani [this message]
2025-05-13  5:17 ` [PATCH v5 17/17] drm/i915/vrr: Enable DC Balance bit Mitul Golani
2025-05-13  5:24 ` ✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev5) Patchwork
2025-05-13  5:25 ` ✗ CI.checkpatch: warning " Patchwork
2025-05-13  5:26 ` ✓ CI.KUnit: success " Patchwork
2025-05-13  5:36 ` ✗ CI.Build: failure " Patchwork
2025-05-13 15:51 ` ✓ CI.Patch_applied: success " Patchwork
2025-05-13 15:51 ` ✗ CI.checkpatch: warning " Patchwork
2025-05-13 15:52 ` ✓ CI.KUnit: success " Patchwork
2025-05-13 16:10 ` ✓ CI.Build: " Patchwork
2025-05-14 17:24 ` ✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev6) Patchwork
2025-05-14 17:24 ` ✗ CI.checkpatch: warning " Patchwork
2025-05-14 17:25 ` ✓ CI.KUnit: success " Patchwork
2025-05-14 17:36 ` ✓ CI.Build: " Patchwork
2025-05-14 17:38 ` ✓ CI.Hooks: " Patchwork
2025-05-14 17:40 ` ✗ CI.checksparse: warning " Patchwork
2025-05-14 18:02 ` ✓ Xe.CI.BAT: success " Patchwork
2025-05-15  1:36 ` ✓ Xe.CI.Full: " Patchwork
2025-05-27  0:39 ` ✗ CI.Patch_applied: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250513051700.507389-17-mitulkumar.ajitkumar.golani@intel.com \
    --to=mitulkumar.ajitkumar.golani@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox