From: Matt Roper <matthew.d.roper@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: matthew.d.roper@intel.com,
Lucas De Marchi <lucas.demarchi@intel.com>,
Gustavo Sousa <gustavo.sousa@intel.com>
Subject: [PATCH v4 04/23] drm/xe: Move 'vm_max_level' flag back to platform descriptor
Date: Tue, 7 Oct 2025 13:48:34 -0700 [thread overview]
Message-ID: <20251007204829.1468209-29-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20251007204829.1468209-25-matthew.d.roper@intel.com>
The number of page table levels for PPGTT virtual addresses is something
that should be tracked at the platform level rather than the IP level.
Even when mixing and matching various graphics, media, and display IP
blocks, the platform as a whole has to have consistent page table
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
v2:
- Drop default value of 4 and explicitly set the value in each platform
descriptor. (Lucas)
v3:
- Drop outdated code comment and commit message paragraph about default
value. (Gustavo)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/xe/xe_pci.c | 22 ++++++++++++++--------
drivers/gpu/drm/xe/xe_pci_types.h | 2 +-
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index 69ed987fef67..8688f40f55d8 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -51,13 +51,10 @@ __diag_ignore_all("-Woverride-init", "Allow field overrides in table");
static const struct xe_graphics_desc graphics_xelp = {
.hw_engine_mask = BIT(XE_HW_ENGINE_RCS0) | BIT(XE_HW_ENGINE_BCS0),
-
- .vm_max_level = 3,
};
#define XE_HP_FEATURES \
- .has_range_tlb_inval = true, \
- .vm_max_level = 3
+ .has_range_tlb_inval = true
static const struct xe_graphics_desc graphics_xehpg = {
.hw_engine_mask =
@@ -82,7 +79,6 @@ static const struct xe_graphics_desc graphics_xehpc = {
BIT(XE_HW_ENGINE_CCS2) | BIT(XE_HW_ENGINE_CCS3),
XE_HP_FEATURES,
- .vm_max_level = 4,
.vram_flags = XE_VRAM_FLAGS_NEED64K,
.has_asid = 1,
@@ -105,7 +101,6 @@ static const struct xe_graphics_desc graphics_xelpg = {
.has_range_tlb_inval = 1, \
.has_usm = 1, \
.has_64bit_timestamp = 1, \
- .vm_max_level = 4, \
.hw_engine_mask = \
BIT(XE_HW_ENGINE_RCS0) | \
BIT(XE_HW_ENGINE_BCS8) | BIT(XE_HW_ENGINE_BCS0) | \
@@ -183,6 +178,7 @@ static const struct xe_device_desc rkl_desc = {
.max_gt_per_tile = 1,
.require_force_probe = true,
.va_bits = 48,
+ .vm_max_level = 3,
};
static const u16 adls_rpls_ids[] = { INTEL_RPLS_IDS(NOP), 0 };
@@ -202,6 +198,7 @@ static const struct xe_device_desc adl_s_desc = {
{},
},
.va_bits = 48,
+ .vm_max_level = 3,
};
static const u16 adlp_rplu_ids[] = { INTEL_RPLU_IDS(NOP), 0 };
@@ -221,6 +218,7 @@ static const struct xe_device_desc adl_p_desc = {
{},
},
.va_bits = 48,
+ .vm_max_level = 3,
};
static const struct xe_device_desc adl_n_desc = {
@@ -234,6 +232,7 @@ static const struct xe_device_desc adl_n_desc = {
.max_gt_per_tile = 1,
.require_force_probe = true,
.va_bits = 48,
+ .vm_max_level = 3,
};
#define DGFX_FEATURES \
@@ -251,6 +250,7 @@ static const struct xe_device_desc dg1_desc = {
.max_gt_per_tile = 1,
.require_force_probe = true,
.va_bits = 48,
+ .vm_max_level = 3,
};
static const u16 dg2_g10_ids[] = { INTEL_DG2_G10_IDS(NOP), INTEL_ATS_M150_IDS(NOP), 0 };
@@ -268,7 +268,8 @@ static const u16 dg2_g12_ids[] = { INTEL_DG2_G12_IDS(NOP), 0 };
{ XE_SUBPLATFORM_DG2_G12, "G12", dg2_g12_ids }, \
{ } \
}, \
- .va_bits = 48
+ .va_bits = 48, \
+ .vm_max_level = 3
static const struct xe_device_desc ats_m_desc = {
.pre_gmdid_graphics_ip = &graphics_ip_xehpg,
@@ -307,6 +308,7 @@ static const __maybe_unused struct xe_device_desc pvc_desc = {
.max_remote_tiles = 1,
.require_force_probe = true,
.va_bits = 57,
+ .vm_max_level = 4,
.has_mbx_power_limits = false,
};
@@ -319,6 +321,7 @@ static const struct xe_device_desc mtl_desc = {
.has_pxp = true,
.max_gt_per_tile = 2,
.va_bits = 48,
+ .vm_max_level = 4,
};
static const struct xe_device_desc lnl_desc = {
@@ -329,6 +332,7 @@ static const struct xe_device_desc lnl_desc = {
.max_gt_per_tile = 2,
.needs_scratch = true,
.va_bits = 48,
+ .vm_max_level = 4,
};
static const struct xe_device_desc bmg_desc = {
@@ -345,6 +349,7 @@ static const struct xe_device_desc bmg_desc = {
.max_gt_per_tile = 2,
.needs_scratch = true,
.va_bits = 48,
+ .vm_max_level = 4,
};
static const struct xe_device_desc ptl_desc = {
@@ -355,6 +360,7 @@ static const struct xe_device_desc ptl_desc = {
.max_gt_per_tile = 2,
.needs_scratch = true,
.va_bits = 48,
+ .vm_max_level = 4,
};
#undef PLATFORM
@@ -593,6 +599,7 @@ static int xe_info_init_early(struct xe_device *xe,
xe->info.dma_mask_size = desc->dma_mask_size;
xe->info.va_bits = desc->va_bits;
+ xe->info.vm_max_level = desc->vm_max_level;
xe->info.is_dgfx = desc->is_dgfx;
xe->info.has_fan_control = desc->has_fan_control;
@@ -723,7 +730,6 @@ static int xe_info_init(struct xe_device *xe,
}
xe->info.vram_flags = graphics_desc->vram_flags;
- xe->info.vm_max_level = graphics_desc->vm_max_level;
xe->info.has_asid = graphics_desc->has_asid;
xe->info.has_atomic_enable_pte_bit = graphics_desc->has_atomic_enable_pte_bit;
if (xe->info.platform != XE_PVC)
diff --git a/drivers/gpu/drm/xe/xe_pci_types.h b/drivers/gpu/drm/xe/xe_pci_types.h
index 796439571abe..6354280584d9 100644
--- a/drivers/gpu/drm/xe/xe_pci_types.h
+++ b/drivers/gpu/drm/xe/xe_pci_types.h
@@ -31,6 +31,7 @@ struct xe_device_desc {
u8 max_remote_tiles:2;
u8 max_gt_per_tile:2;
u8 va_bits;
+ u8 vm_max_level;
u8 require_force_probe:1;
u8 is_dgfx:1;
@@ -52,7 +53,6 @@ struct xe_device_desc {
};
struct xe_graphics_desc {
- u8 vm_max_level;
u8 vram_flags;
u64 hw_engine_mask; /* hardware engines provided by graphics IP */
--
2.51.0
next prev parent reply other threads:[~2025-10-07 20:48 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-07 20:48 [PATCH v4 00/23] Allow configfs to disable specific GT type(s) Matt Roper
2025-10-07 20:48 ` [PATCH v4 01/23] drm/xe/huc: Adjust HuC check on primary GT Matt Roper
2025-10-07 20:48 ` [PATCH v4 02/23] drm/xe: Drop GT parameter to xe_display_irq_postinstall() Matt Roper
2025-10-07 20:48 ` [PATCH v4 03/23] drm/xe: Move 'va_bits' flag back to platform descriptor Matt Roper
2025-10-07 22:02 ` Lucas De Marchi
2025-10-07 22:44 ` Matt Roper
2025-10-07 20:48 ` Matt Roper [this message]
2025-10-07 21:54 ` [PATCH v4 04/23] drm/xe: Move 'vm_max_level' " Lucas De Marchi
2025-10-08 13:28 ` Gustavo Sousa
2025-10-07 20:48 ` [PATCH v4 05/23] drm/xe: Move 'vram_flags' " Matt Roper
2025-10-07 20:48 ` [PATCH v4 06/23] drm/xe: Move 'has_flatccs' " Matt Roper
2025-10-10 10:50 ` Jani Nikula
2025-10-13 16:42 ` Matt Roper
2025-10-07 20:48 ` [PATCH v4 07/23] drm/xe: Read VF GMD_ID with a specifically-allocated dummy GT Matt Roper
2025-10-08 3:06 ` Lucas De Marchi
2025-10-07 20:48 ` [PATCH v4 08/23] drm/xe: Move primary GT allocation from xe_tile_init_early to xe_tile_init Matt Roper
2025-10-07 20:48 ` [PATCH v4 09/23] drm/xe: Skip L2 / TDF cache flushes if primary GT is disabled Matt Roper
2025-10-07 20:48 ` [PATCH v4 10/23] drm/xe/query: Report hwconfig size as 0 " Matt Roper
2025-10-07 20:48 ` [PATCH v4 11/23] drm/xe/pmu: Initialize PMU event types based on first available GT Matt Roper
2025-10-07 20:48 ` [PATCH v4 12/23] drm/xe: Check for primary GT before looking up Wa_22019338487 Matt Roper
2025-10-08 13:30 ` Gustavo Sousa
2025-10-07 20:48 ` [PATCH v4 13/23] drm/xe: Make display part of Wa_22019338487 a device workaround Matt Roper
2025-10-07 20:48 ` [PATCH v4 14/23] drm/xe/irq: Don't try to lookup engine masks for non-existent primary GT Matt Roper
2025-10-07 20:48 ` [PATCH v4 15/23] drm/xe: Handle Wa_22010954014 and Wa_14022085890 as device workarounds Matt Roper
2025-10-07 20:48 ` [PATCH v4 16/23] drm/xe/rtp: Pass xe_device parameter to FUNC matches Matt Roper
2025-10-07 20:48 ` [PATCH v4 17/23] drm/xe: Bypass Wa_14018094691 when primary GT is disabled Matt Roper
2025-10-07 20:48 ` [PATCH v4 18/23] drm/xe: Correct lineage for Wa_22014953428 and only check with valid GT Matt Roper
2025-10-07 20:48 ` [PATCH v4 19/23] drm/xe: Check that GT is not NULL before testing Wa_16023588340 Matt Roper
2025-10-07 20:48 ` [PATCH v4 20/23] drm/xe: Don't check BIOS-disabled FlatCCS if primary GT is disabled Matt Roper
2025-10-07 20:48 ` [PATCH v4 21/23] drm/xe: Break GT setup out of xe_info_init() Matt Roper
2025-10-08 3:15 ` Lucas De Marchi
2025-10-08 13:39 ` Gustavo Sousa
2025-10-07 20:48 ` [PATCH v4 22/23] drm/xe/configfs: Add attribute to disable GT types Matt Roper
2025-10-08 3:37 ` Lucas De Marchi
2025-10-08 19:10 ` Matt Roper
2025-10-08 19:22 ` Lucas De Marchi
2025-10-08 10:12 ` Michal Wajdeczko
2025-10-08 20:08 ` Matt Roper
2025-10-08 21:10 ` Lucas De Marchi
2025-10-08 14:06 ` Gustavo Sousa
2025-10-07 20:48 ` [PATCH v4 23/23] drm/xe/sriov: Disable SR-IOV if primary GT is disabled via configfs Matt Roper
2025-10-07 20:56 ` ✗ CI.checkpatch: warning for Allow configfs to disable specific GT type(s) (rev4) Patchwork
2025-10-07 20:57 ` ✓ CI.KUnit: success " Patchwork
2025-10-07 21:49 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-07 23:22 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251007204829.1468209-29-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=gustavo.sousa@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=lucas.demarchi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox