From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org,
"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: [PATCH v2 1/9] drm/i915/vblank: Add helper to get correct vblank length
Date: Tue, 14 Oct 2025 22:18:00 +0300 [thread overview]
Message-ID: <20251014191808.12326-2-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20251014191808.12326-1-ville.syrjala@linux.intel.com>
From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently crtc_vblank_start is assumed to be the vblank_start for the fixed
refresh rate case. That value can be different from the variable refresh
rate case whenever always_use_vrr_tg()==false. On icl/tgl it's always
different due to the extra vblank delay, and also on adl+ it could be
different if we were to use an optimized guardband.
So places where crtc_vblank_start is used to compute vblank length needs
change so as to account for cases where vrr is enabled. Specifically
with vrr.enable the effective vblank length is actually guardband.
Add a helper to get the correct vblank length for both vrr and fixed
refresh rate cases. Use this helper where vblank_start is used to
compute the vblank length.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_vblank.c | 10 ++++++++++
drivers/gpu/drm/i915/display/intel_vblank.h | 2 ++
drivers/gpu/drm/i915/display/skl_watermark.c | 3 ++-
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_vblank.c b/drivers/gpu/drm/i915/display/intel_vblank.c
index 0b7fcc05e64c..2fc0c1c0bb87 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.c
+++ b/drivers/gpu/drm/i915/display/intel_vblank.c
@@ -767,3 +767,13 @@ int intel_vblank_evade(struct intel_vblank_evade_ctx *evade)
return scanline;
}
+
+int intel_crtc_vblank_length(const struct intel_crtc_state *crtc_state)
+{
+ const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+
+ if (crtc_state->vrr.enable)
+ return crtc_state->vrr.guardband;
+ else
+ return adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vblank_start;
+}
diff --git a/drivers/gpu/drm/i915/display/intel_vblank.h b/drivers/gpu/drm/i915/display/intel_vblank.h
index 21fbb08d61d5..98d04cacd65f 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.h
+++ b/drivers/gpu/drm/i915/display/intel_vblank.h
@@ -48,4 +48,6 @@ const struct intel_crtc_state *
intel_pre_commit_crtc_state(struct intel_atomic_state *state,
struct intel_crtc *crtc);
+int intel_crtc_vblank_length(const struct intel_crtc_state *crtc_state);
+
#endif /* __INTEL_VBLANK_H__ */
diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
index 9df9ee137bf9..06e5e6c77d2e 100644
--- a/drivers/gpu/drm/i915/display/skl_watermark.c
+++ b/drivers/gpu/drm/i915/display/skl_watermark.c
@@ -28,6 +28,7 @@
#include "intel_flipq.h"
#include "intel_pcode.h"
#include "intel_plane.h"
+#include "intel_vblank.h"
#include "intel_wm.h"
#include "skl_universal_plane_regs.h"
#include "skl_watermark.h"
@@ -2241,7 +2242,7 @@ skl_is_vblank_too_short(const struct intel_crtc_state *crtc_state,
scaler_prefill_latency(crtc_state) +
dsc_prefill_latency(crtc_state) +
wm0_lines >
- adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vblank_start;
+ intel_crtc_vblank_length(crtc_state);
}
static int skl_max_wm0_lines(const struct intel_crtc_state *crtc_state)
--
2.49.1
next prev parent reply other threads:[~2025-10-14 19:18 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-14 19:17 [PATCH v2 0/9] drm/i915/prefill: Introduce helpers for prefill latency calculations Ville Syrjala
2025-10-14 19:18 ` Ville Syrjala [this message]
2025-10-14 19:18 ` [PATCH v2 2/9] drm/i915: Reject modes with linetime > 64 usec Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 3/9] drm/i915/cdclk: Add prefill helpers for CDCLK Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 4/9] drm/i915/cdclk: Add intel_cdclk_min_cdclk_for_prefill() Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 5/9] drm/i915/dsc: Add prefill helper for DSC Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 6/9] drm/i915/scaler: Add scaler prefill helpers Ville Syrjala
2025-10-15 11:23 ` Shankar, Uma
2025-10-15 12:51 ` Ville Syrjälä
2025-10-15 12:56 ` [PATCH v3 " Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 7/9] drm/i915/wm: Add WM0 " Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 8/9] drm/i915/prefill: Introduce skl_prefill.c Ville Syrjala
2025-10-14 19:18 ` [PATCH v2 9/9] drm/i915/wm: Use skl_prefill Ville Syrjala
2025-10-14 19:24 ` ✗ CI.checkpatch: warning for drm/i915/prefill: Introduce helpers for prefill latency calculations (rev2) Patchwork
2025-10-14 19:25 ` ✓ CI.KUnit: success " Patchwork
2025-10-14 19:43 ` ✗ CI.checksparse: warning " Patchwork
2025-10-14 20:05 ` ✓ Xe.CI.BAT: success " Patchwork
2025-10-15 6:42 ` ✗ Xe.CI.Full: failure " Patchwork
2025-10-15 20:58 ` ✗ CI.checkpatch: warning for drm/i915/prefill: Introduce helpers for prefill latency calculations (rev3) Patchwork
2025-10-15 21:00 ` ✓ CI.KUnit: success " Patchwork
2025-10-15 21:15 ` ✗ CI.checksparse: warning " Patchwork
2025-10-15 21:40 ` ✓ Xe.CI.BAT: success " Patchwork
2025-10-16 8:33 ` ✓ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251014191808.12326-2-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox