Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org,
	mitulkumar.ajitkumar.golani@intel.com,
	ankit.k.nautiyal@intel.com, uma.shankar@intel.com,
	ville.syrjala@linux.intel.com
Subject: [PATCH v8 02/22] drm/i915/dmc: Add pipe dmc registers and bits for DC Balance
Date: Mon, 27 Oct 2025 21:59:07 +0530	[thread overview]
Message-ID: <20251027162927.2655581-3-mitulkumar.ajitkumar.golani@intel.com> (raw)
In-Reply-To: <20251027162927.2655581-1-mitulkumar.ajitkumar.golani@intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Add pipe dmc registers and  access bits for DC Balance params
configuration and enablement.

--v2:
- Separate register definitions for transcoder and
pipe dmc. (Ankit)
- Use MMIO pipe macros instead of transcoder ones. (Ankit)
- Remove dev_priv use. (Jani, Nikula)

--v3:
- Add all register address, from capital alphabet to small. (Ankit)
- Add EVT CTL registers.
- Add co-author tag.
- Add event flag for Triggering DC Balance.

--v4:
- Add DCB Flip count and balance reset registers.

Co-authored-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dmc_regs.h | 61 ++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dmc_regs.h b/drivers/gpu/drm/i915/display/intel_dmc_regs.h
index c5aa49921cb9..225dbe3ac137 100644
--- a/drivers/gpu/drm/i915/display/intel_dmc_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_dmc_regs.h
@@ -583,5 +583,64 @@ enum pipedmc_event_id {
 /* undocumented magic DMC variables */
 #define PTL_PIPEDMC_EXEC_TIME_LINES(start_mmioaddr) _MMIO((start_mmioaddr) + 0x6b8)
 #define PTL_PIPEDMC_END_OF_EXEC_GB(start_mmioaddr) _MMIO((start_mmioaddr) + 0x6c0)
-
+#define _PIPEDMC_DCB_CTL_A			0x5f1a0
+#define _PIPEDMC_DCB_CTL_B			0x5f5a0
+#define PIPEDMC_DCB_CTL(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_CTL_A,\
+							   _PIPEDMC_DCB_CTL_B)
+#define PIPEDMC_ADAPTIVE_DCB_ENABLE		REG_BIT(31)
+
+#define _PIPEDMC_DCB_VBLANK_A			0x5f1bc
+#define _PIPEDMC_DCB_VBLANK_B			0x5f5bc
+#define PIPEDMC_DCB_VBLANK(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_VBLANK_A,\
+							   _PIPEDMC_DCB_VBLANK_B)
+
+#define _PIPEDMC_DCB_SLOPE_A			0x5f1b8
+#define _PIPEDMC_DCB_SLOPE_B			0x5f5b8
+#define PIPEDMC_DCB_SLOPE(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_SLOPE_A,\
+							   _PIPEDMC_DCB_SLOPE_B)
+
+#define _PIPEDMC_DCB_GUARDBAND_A		0x5f1b4
+#define _PIPEDMC_DCB_GUARDBAND_B		0x5f5b4
+#define PIPEDMC_DCB_GUARDBAND(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_GUARDBAND_A,\
+							   _PIPEDMC_DCB_GUARDBAND_B)
+
+#define _PIPEDMC_DCB_MAX_INCREASE_A		0x5f1ac
+#define _PIPEDMC_DCB_MAX_INCREASE_B		0x5f5ac
+#define PIPEDMC_DCB_MAX_INCREASE(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_MAX_INCREASE_A,\
+							   _PIPEDMC_DCB_MAX_INCREASE_B)
+
+#define _PIPEDMC_DCB_MAX_DECREASE_A		0x5f1b0
+#define _PIPEDMC_DCB_MAX_DECREASE_B		0x5f5b0
+#define PIPEDMC_DCB_MAX_DECREASE(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_MAX_DECREASE_A,\
+							   _PIPEDMC_DCB_MAX_DECREASE_B)
+
+#define _PIPEDMC_DCB_VMIN_A			0x5f1a4
+#define _PIPEDMC_DCB_VMIN_B			0x5f5a4
+#define PIPEDMC_DCB_VMIN(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_VMIN_A,\
+							   _PIPEDMC_DCB_VMIN_B)
+
+#define _PIPEDMC_DCB_VMAX_A			0x5f1a8
+#define _PIPEDMC_DCB_VMAX_B			0x5f5a8
+#define PIPEDMC_DCB_VMAX(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_VMAX_A,\
+							   _PIPEDMC_DCB_VMAX_B)
+
+#define _PIPEDMC_DCB_DEBUG_A			0x5f1c0
+#define _PIPEDMC_DCB_DEBUG_B			0x5f5c0
+#define PIPEDMC_DCB_DEBUG(pipe)			_MMIO_PIPE(pipe, _PIPEDMC_DCB_DEBUG_A,\
+							   _PIPEDMC_DCB_DEBUG_B)
+
+#define _PIPEDMC_EVT_CTL_3_A			0x5f040
+#define _PIPEDMC_EVT_CTL_3_B			0x5f440
+#define PIPEDMC_EVT_CTL_3(pipe)			_MMIO_PIPE(pipe, _PIPEDMC_EVT_CTL_3_A,\
+							   _PIPEDMC_EVT_CTL_3_B)
+
+#define _PIPEDMC_DCB_FLIP_COUNT_A		0x906A4
+#define _PIPEDMC_DCB_FLIP_COUNT_B		0x986A4
+#define PIPEDMC_DCB_FLIP_COUNT(pipe)		_MMIO_PIPE(pipe, _PIPEDMC_EVT_CTL_3_A,\
+							   _PIPEDMC_DCB_FLIP_COUNT_B)
+
+#define _PIPEDMC_DCB_BALANCE_RESET_A		0x906A8
+#define _PIPEDMC_DCB_BALANCE_RESET_B		0x986A8
+#define PIPEDMC_DCB_BALANCE_RESET(pipe)		_MMIO_PIPE(pipe, _PIPEDMC_DCB_BALANCE_RESET_A,\
+							   _PIPEDMC_DCB_BALANCE_RESET_B)
 #endif /* __INTEL_DMC_REGS_H__ */
-- 
2.48.1


  parent reply	other threads:[~2025-10-27 16:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-27 16:29 [PATCH v8 00/22] Enable/Disable DC balance along with VRR DSB Mitul Golani
2025-10-27 16:29 ` [PATCH v8 01/22] drm/i915/display: Add source param for dc balance Mitul Golani
2025-10-27 16:29 ` Mitul Golani [this message]
2025-10-27 16:29 ` [PATCH v8 03/22] drm/i915/vrr: Add VRR DC balance registers Mitul Golani
2025-10-27 16:29 ` [PATCH v8 04/22] drm/i915/vrr: Add functions to read out vmin/vmax stuff Mitul Golani
2025-10-27 16:29 ` [PATCH v8 05/22] drm/i915/vrr: Add DC Balance params to crtc_state Mitul Golani
2025-10-27 16:29 ` [PATCH v8 06/22] drm/i915/vrr: Add state dump for DC Balance params Mitul Golani
2025-10-27 16:29 ` [PATCH v8 07/22] drm/i915/vrr: Add compute config " Mitul Golani
2025-10-27 16:29 ` [PATCH v8 08/22] drm/i915/display: Add DC Balance flip counter in crtc Mitul Golani
2025-10-27 16:29 ` [PATCH v8 09/22] drm/i915/vrr: Increment DC balance flip count on every flip Mitul Golani
2025-10-27 16:29 ` [PATCH v8 10/22] drm/i915/vrr: Add function to reset DC Balance flip count Mitul Golani
2025-10-27 16:29 ` [PATCH v8 11/22] drm/i915/vrr: Add function reset DC balance accumulated params Mitul Golani
2025-10-27 16:29 ` [PATCH v8 12/22] drm/i915/vrr: Write DC balance params to hw registers Mitul Golani
2025-10-27 16:29 ` [PATCH v8 13/22] drm/i915/vrr: Configure DC balance flipline adjustment Mitul Golani
2025-10-27 16:29 ` [PATCH v8 14/22] drm/i915/vblank: Extract vrr_vblank_start() Mitul Golani
2025-10-27 16:29 ` [PATCH v8 15/22] drm/i915/vrr: Implement vblank evasion with DC balancing Mitul Golani
2025-10-27 16:29 ` [PATCH v8 16/22] drm/i915/display: Wait for VRR PUSH status update Mitul Golani
2025-10-27 16:29 ` [PATCH v8 17/22] drm/i915/dsb: Add pipedmc dc balance enable/disable Mitul Golani
2025-10-27 16:29 ` [PATCH v8 18/22] drm/i915/vrr: Pause DC Balancing for DSB commits Mitul Golani
2025-10-27 16:29 ` [PATCH v8 19/22] drm/i915/display: Add function to configure event for dc balance Mitul Golani
2025-10-27 16:29 ` [PATCH v8 20/22] drm/i915/vrr: Enable Adaptive sync counter bit Mitul Golani
2025-10-27 16:29 ` [PATCH v8 21/22] drm/i915/vrr: Enable DC Balance Mitul Golani
2025-10-27 16:29 ` [PATCH v8 22/22] drm/i915/vrr: Add function to check if DC Balance Possible Mitul Golani
2025-10-27 19:51   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251027162927.2655581-3-mitulkumar.ajitkumar.golani@intel.com \
    --to=mitulkumar.ajitkumar.golani@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=uma.shankar@intel.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox