[PATCH 4/5] drm/i915/cx0: Read out power-down state of both TXs in PHY lane 0

[Imre Deak <imre.deak@intel.com>]

If the number of used lanes is 1 or 2 then the power-down state of both
TX lanes in PHY lane 0 should be read out. If 1 lane is used only 1 TX
lane will be checked, make sure both TXs are checked in this case.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Fixes: 230d4c748113 ("drm/i915/cx0: Track the Cx0 PHY enabled lane count in the PLL state")
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_cx0_phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index 96ab7f3b5539c..0d524735dcf95 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -2209,7 +2209,7 @@ static int readout_enabled_lane_count(struct intel_encoder *encoder)
 	 */
 	max_tx_lane_count = DDI_PORT_WIDTH_GET(intel_de_read(display, DDI_BUF_CTL(encoder->port)));
 	if (!drm_WARN_ON(display->drm, max_tx_lane_count == 0))
-		max_tx_lane_count = roundup_pow_of_two(max_tx_lane_count);
+		max_tx_lane_count = round_up(max_tx_lane_count, 2);
 
 	for (tx_lane = 0; tx_lane < max_tx_lane_count; tx_lane++) {
 		u8 phy_lane_mask = tx_lane < 2 ? INTEL_CX0_LANE0 : INTEL_CX0_LANE1;
-- 
2.49.1