Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Subject: [PATCH 08/50] drm/i915/dp: Use the effective data rate for DP BW calculation
Date: Thu, 27 Nov 2025 19:49:41 +0200	[thread overview]
Message-ID: <20251127175023.1522538-9-imre.deak@intel.com> (raw)
In-Reply-To: <20251127175023.1522538-1-imre.deak@intel.com>

Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.

This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).

Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c       | 40 +++++++++++--------
 drivers/gpu/drm/i915/display/intel_dp.h       |  4 +-
 .../drm/i915/display/intel_dp_link_training.c |  4 +-
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |  4 +-
 4 files changed, 33 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4556a57db7c02..aa55a81a9a9bf 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -453,15 +453,15 @@ int intel_dp_link_bw_overhead(int link_clock, int lane_count, int hdisplay,
 /*
  * The required data bandwidth for a mode with given pixel clock and bpp. This
  * is the required net bandwidth independent of the data bandwidth efficiency.
- *
- * TODO: check if callers of this functions should use
- * intel_dp_effective_data_rate() instead.
  */
-int
-intel_dp_link_required(int pixel_clock, int bpp)
+int intel_dp_link_required(int link_clock, int lane_count,
+			   int mode_clock, int mode_hdisplay,
+			   int link_bpp_x16, unsigned long bw_overhead_flags)
 {
-	/* pixel_clock is in kHz, divide bpp by 8 for bit to Byte conversion */
-	return DIV_ROUND_UP(pixel_clock * bpp, 8);
+	int bw_overhead = intel_dp_link_bw_overhead(link_clock, lane_count, mode_hdisplay,
+						    0, link_bpp_x16, bw_overhead_flags);
+
+	return intel_dp_effective_data_rate(mode_clock, link_bpp_x16, bw_overhead);
 }
 
 /**
@@ -1531,7 +1531,9 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 	max_rate = intel_dp_max_link_data_rate(intel_dp, max_link_clock, max_lanes);
 
 	link_bpp_x16 = intel_dp_mode_min_link_bpp_x16(connector, mode);
-	mode_rate = intel_dp_link_required(target_clock, fxp_q4_to_int_roundup(link_bpp_x16));
+	mode_rate = intel_dp_link_required(max_link_clock, max_lanes,
+					   target_clock, mode->hdisplay,
+					   link_bpp_x16, 0);
 
 	if (intel_dp_has_dsc(connector)) {
 		int pipe_bpp;
@@ -1838,7 +1840,7 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
 				  const struct link_config_limits *limits)
 {
 	int bpp, i, lane_count, clock = intel_dp_mode_clock(pipe_config, conn_state);
-	int mode_rate, link_rate, link_avail;
+	int link_rate, link_avail;
 
 	for (bpp = fxp_q4_to_int(limits->link.max_bpp_x16);
 	     bpp >= fxp_q4_to_int(limits->link.min_bpp_x16);
@@ -1846,8 +1848,6 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
 		int link_bpp_x16 =
 			intel_dp_output_format_link_bpp_x16(pipe_config->output_format, bpp);
 
-		mode_rate = intel_dp_link_required(clock, fxp_q4_to_int_roundup(link_bpp_x16));
-
 		for (i = 0; i < intel_dp->num_common_rates; i++) {
 			link_rate = intel_dp_common_rate(intel_dp, i);
 			if (link_rate < limits->min_rate ||
@@ -1857,11 +1857,17 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
 			for (lane_count = limits->min_lane_count;
 			     lane_count <= limits->max_lane_count;
 			     lane_count <<= 1) {
+				const struct drm_display_mode *adjusted_mode =
+					&pipe_config->hw.adjusted_mode;
+				int mode_rate =
+					intel_dp_link_required(link_rate, lane_count,
+							       clock, adjusted_mode->hdisplay,
+							       link_bpp_x16, 0);
+
 				link_avail = intel_dp_max_link_data_rate(intel_dp,
 									 link_rate,
 									 lane_count);
 
-
 				if (mode_rate <= link_avail) {
 					pipe_config->lane_count = lane_count;
 					pipe_config->pipe_bpp = bpp;
@@ -2724,11 +2730,13 @@ int intel_dp_config_required_rate(const struct intel_crtc_state *crtc_state)
 {
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->hw.adjusted_mode;
-	int bpp = crtc_state->dsc.compression_enable ?
-		fxp_q4_to_int_roundup(crtc_state->dsc.compressed_bpp_x16) :
-		crtc_state->pipe_bpp;
+	int link_bpp_x16 = crtc_state->dsc.compression_enable ?
+		crtc_state->dsc.compressed_bpp_x16 :
+		fxp_q4_from_int(crtc_state->pipe_bpp);
 
-	return intel_dp_link_required(adjusted_mode->crtc_clock, bpp);
+	return intel_dp_link_required(crtc_state->port_clock, crtc_state->lane_count,
+				      adjusted_mode->crtc_clock, adjusted_mode->hdisplay,
+				      link_bpp_x16, 0);
 }
 
 bool intel_dp_joiner_needs_dsc(struct intel_display *display,
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index d7f9410129f49..30eebb8cad6d2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -119,7 +119,9 @@ bool intel_dp_source_supports_tps4(struct intel_display *display);
 
 int intel_dp_link_bw_overhead(int link_clock, int lane_count, int hdisplay,
 			      int dsc_slice_count, int bpp_x16, unsigned long flags);
-int intel_dp_link_required(int pixel_clock, int bpp);
+int intel_dp_link_required(int link_clock, int lane_count,
+			   int mode_clock, int mode_hdisplay,
+			   int link_bpp_x16, unsigned long bw_overhead_flags);
 int intel_dp_effective_data_rate(int pixel_clock, int bpp_x16,
 				 int bw_overhead);
 int intel_dp_max_link_data_rate(struct intel_dp *intel_dp,
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index aad5fe14962f9..54c585c59b900 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -1195,7 +1195,9 @@ static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
 		intel_panel_preferred_fixed_mode(intel_dp->attached_connector);
 	int mode_rate, max_rate;
 
-	mode_rate = intel_dp_link_required(fixed_mode->clock, 18);
+	mode_rate = intel_dp_link_required(link_rate, lane_count,
+					   fixed_mode->clock, fixed_mode->hdisplay,
+					   fxp_q4_from_int(18), 0);
 	max_rate = intel_dp_max_link_data_rate(intel_dp, link_rate, lane_count);
 	if (mode_rate > max_rate)
 		return false;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index c1058b4a85d02..e4dd6b4ca0512 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -1489,7 +1489,9 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 
 	max_rate = intel_dp_max_link_data_rate(intel_dp,
 					       max_link_clock, max_lanes);
-	mode_rate = intel_dp_link_required(mode->clock, min_bpp);
+	mode_rate = intel_dp_link_required(max_link_clock, max_lanes,
+					   mode->clock, mode->hdisplay,
+					   fxp_q4_from_int(min_bpp), 0);
 
 	/*
 	 * TODO:
-- 
2.49.1


  parent reply	other threads:[~2025-11-27 17:51 UTC|newest]

Thread overview: 141+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-27 17:49 [PATCH 00/50] drm/i915/dp: Clean up link BW/DSC slice config computation Imre Deak
2025-11-27 17:49 ` [PATCH 01/50] drm/dp: Parse all DSC slice count caps for eDP 1.5 Imre Deak
2025-12-08 11:24   ` Luca Coelho
2025-12-08 12:36     ` Imre Deak
2025-11-27 17:49 ` [PATCH 02/50] drm/dp: Add drm_dp_dsc_sink_slice_count_mask() Imre Deak
2025-12-09  8:48   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 03/50] drm/i915/dp: Fix DSC sink's slice count capability check Imre Deak
2025-12-09  8:51   ` Luca Coelho
2025-12-09  9:53     ` Imre Deak
2025-12-09 11:14       ` Luca Coelho
2025-11-27 17:49 ` [PATCH 04/50] drm/i915/dp: Return a fixed point BPP value from intel_dp_output_bpp() Imre Deak
2025-12-09  9:10   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 05/50] drm/i915/dp: Use a mode's crtc_clock vs. clock during state computation Imre Deak
2025-12-09 12:51   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 06/50] drm/i915/dp: Factor out intel_dp_link_bw_overhead() Imre Deak
2025-12-09 12:52   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 07/50] drm/i915/dp: Fix BW check in is_bw_sufficient_for_dsc_config() Imre Deak
2025-12-09 12:53   ` Luca Coelho
2025-11-27 17:49 ` Imre Deak [this message]
2025-12-10 12:48   ` [PATCH 08/50] drm/i915/dp: Use the effective data rate for DP BW calculation Luca Coelho
2025-11-27 17:49 ` [PATCH 09/50] drm/i915/dp: Use the effective data rate for DP compressed " Imre Deak
2025-12-10 12:50   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 10/50] drm/i915/dp: Account with MST, SSC BW overhead for uncompressed DP-MST stream BW Imre Deak
2025-12-10 13:08   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 11/50] drm/i915/dp: Account with DSC BW overhead for compressed DP-SST " Imre Deak
2025-12-10 13:39   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 12/50] drm/i915/dp: Account with pipe joiner max compressed BPP limit for DP-MST and eDP Imre Deak
2025-12-10 14:29   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 13/50] drm/i915/dp: Drop unused timeslots param from dsc_compute_link_config() Imre Deak
2025-12-10 14:31   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 14/50] drm/i915/dp: Factor out align_max_sink_dsc_input_bpp() Imre Deak
2025-12-12 15:41   ` Govindapillai, Vinod
2025-12-15  7:46   ` Luca Coelho
2025-12-15 11:53     ` Imre Deak
2025-12-15 12:02       ` Luca Coelho
2025-12-15 12:33         ` Imre Deak
2025-11-27 17:49 ` [PATCH 15/50] drm/i915/dp: Factor out align_max_vesa_compressed_bpp_x16() Imre Deak
2025-12-12 15:46   ` Govindapillai, Vinod
2025-12-15  7:49   ` Luca Coelho
2025-12-15 12:00     ` Imre Deak
2025-12-15 12:08       ` Luca Coelho
2025-12-15 12:24         ` Imre Deak
2025-11-27 17:49 ` [PATCH 16/50] drm/i915/dp: Fail state computation for invalid min/max link BPP values Imre Deak
2025-12-12 15:48   ` Govindapillai, Vinod
2025-12-15  7:51   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 17/50] drm/i915/dp: Fail state computation for invalid max throughput BPP value Imre Deak
2025-12-12 15:51   ` Govindapillai, Vinod
2025-12-15  7:51   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 18/50] drm/i915/dp: Fail state computation for invalid max sink compressed " Imre Deak
2025-12-12 15:52   ` Govindapillai, Vinod
2025-12-15  7:52   ` Luca Coelho
2025-11-27 17:49 ` [PATCH 19/50] drm/i915/dp: Fail state computation for invalid DSC source input BPP values Imre Deak
2025-12-11  8:29   ` Govindapillai, Vinod
2025-11-27 17:49 ` [PATCH 20/50] drm/i915/dp: Align min/max DSC input BPPs to sink caps Imre Deak
2025-12-11  8:51   ` Govindapillai, Vinod
2025-11-27 17:49 ` [PATCH 21/50] drm/i915/dp: Align min/max compressed BPPs when calculating BPP limits Imre Deak
2025-12-12  9:17   ` Govindapillai, Vinod
2025-12-12 11:09     ` Imre Deak
2025-11-27 17:49 ` [PATCH 22/50] drm/i915/dp: Drop intel_dp parameter from intel_dp_compute_config_link_bpp_limits() Imre Deak
2025-12-12  9:23   ` Govindapillai, Vinod
2025-11-27 17:49 ` [PATCH 23/50] drm/i915/dp: Pass intel_output_format to intel_dp_dsc_sink_{min_max}_compressed_bpp() Imre Deak
2025-12-12  9:27   ` Govindapillai, Vinod
2025-11-27 17:49 ` [PATCH 24/50] drm/i915/dp: Pass mode clock to dsc_throughput_quirk_max_bpp_x16() Imre Deak
2025-12-12  9:31   ` Govindapillai, Vinod
2025-11-27 17:49 ` [PATCH 25/50] drm/i915/dp: Factor out compute_min_compressed_bpp_x16() Imre Deak
2025-12-12  9:39   ` Govindapillai, Vinod
2025-12-12 11:01     ` Imre Deak
2025-12-12 11:41       ` Govindapillai, Vinod
2025-11-27 17:49 ` [PATCH 26/50] drm/i915/dp: Factor out compute_max_compressed_bpp_x16() Imre Deak
2025-12-12  9:50   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 27/50] drm/i915/dp: Add intel_dp_mode_valid_with_dsc() Imre Deak
2025-12-12 11:43   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 28/50] drm/i915/dp: Unify detect and compute time DSC mode BW validation Imre Deak
2025-12-12 14:29   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 29/50] drm/i915/dp: Use helpers to align min/max compressed BPPs Imre Deak
2025-12-12 14:34   ` Govindapillai, Vinod
2025-12-12 14:39   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 30/50] drm/i915/dp: Simplify computing DSC BPPs for eDP Imre Deak
2025-12-12 14:45   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 31/50] drm/i915/dp: Simplify computing DSC BPPs for DP-SST Imre Deak
2025-12-12 14:59   ` Govindapillai, Vinod
2025-12-12 18:41     ` Imre Deak
2025-11-27 17:50 ` [PATCH 32/50] drm/i915/dp: Simplify computing forced DSC BPP " Imre Deak
2025-12-12 15:21   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 33/50] drm/i915/dp: Unify computing compressed BPP for DP-SST and eDP Imre Deak
2025-12-12 15:38   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 34/50] drm/i915/dp: Simplify eDP vs. DP compressed BPP computation Imre Deak
2025-12-12 15:39   ` Govindapillai, Vinod
2025-11-27 17:50 ` [PATCH 35/50] drm/i915/dp: Simplify computing the DSC compressed BPP for DP-MST Imre Deak
2025-12-08 13:08   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 36/50] drm/i915/dsc: Track the detaild DSC slice configuration Imre Deak
2025-12-09  8:24   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 37/50] drm/i915/dsc: Track the DSC stream count in the DSC slice config state Imre Deak
2025-12-09  8:28   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 38/50] drm/i915/dsi: Move initialization of DSI DSC streams-per-pipe to fill_dsc() Imre Deak
2025-12-09  8:47   ` Hogander, Jouni
2025-12-09 10:38     ` Imre Deak
2025-12-09 11:37       ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 39/50] drm/i915/dsi: Track the detailed DSC slice configuration Imre Deak
2025-12-09 12:43   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 40/50] drm/i915/dp: " Imre Deak
2025-12-09 14:06   ` Hogander, Jouni
2025-12-09 14:30     ` Imre Deak
2025-12-09 17:50       ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 41/50] drm/i915/dsc: Switch to using intel_dsc_line_slice_count() Imre Deak
2025-12-09 17:14   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 42/50] drm/i915/dp: Factor out intel_dp_dsc_min_slice_count() Imre Deak
2025-12-09 17:26   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 43/50] drm/i915/dp: Use int for DSC slice count variables Imre Deak
2025-12-09 17:30   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 44/50] drm/i915/dp: Rename test_slice_count to slices_per_line Imre Deak
2025-12-09 17:34   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 45/50] drm/i915/dp: Simplify the DSC slice config loop's slices-per-pipe iteration Imre Deak
2025-12-10 12:38   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 46/50] drm/i915/dsc: Add intel_dsc_get_slice_config() Imre Deak
2025-12-10 14:06   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 47/50] drm/i915/dsi: Use intel_dsc_get_slice_config() Imre Deak
2025-12-10 14:44   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 48/50] drm/i915/dp: Unify DP and eDP slice count computation Imre Deak
2025-12-11  6:48   ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 49/50] drm/i915/dp: Add intel_dp_dsc_get_slice_config() Imre Deak
2025-12-11  6:55   ` Hogander, Jouni
2025-12-11  9:52     ` Imre Deak
2025-12-12 18:17   ` [PATCH v2 " Imre Deak
2025-12-15  6:06     ` Hogander, Jouni
2025-11-27 17:50 ` [PATCH 50/50] drm/i915/dp: Use intel_dp_dsc_get_slice_config() Imre Deak
2025-12-11  6:59   ` Hogander, Jouni
2025-12-11 10:23     ` Imre Deak
2025-12-12 18:03       ` Imre Deak
2025-12-12 18:17   ` [PATCH v2 " Imre Deak
2025-11-27 20:28 ` ✗ CI.checkpatch: warning for drm/i915/dp: Clean up link BW/DSC slice config computation Patchwork
2025-11-27 20:29 ` ✓ CI.KUnit: success " Patchwork
2025-11-27 20:44 ` ✗ CI.checksparse: warning " Patchwork
2025-11-27 21:47 ` ✓ Xe.CI.BAT: success " Patchwork
2025-11-27 23:11 ` ✗ Xe.CI.Full: failure " Patchwork
     [not found] ` <20251128162050.1600107-1-imre.deak@intel.com>
2025-12-12 13:23   ` [CI 09/50] drm/i915/dp: Use the effective data rate for DP compressed BW calculation Govindapillai, Vinod
2025-12-12 20:45 ` ✗ CI.checkpatch: warning for drm/i915/dp: Clean up link BW/DSC slice config computation (rev3) Patchwork
2025-12-12 20:46 ` ✓ CI.KUnit: success " Patchwork
2025-12-12 21:01 ` ✗ CI.checksparse: warning " Patchwork
2025-12-12 22:03 ` ✓ Xe.CI.BAT: success " Patchwork
2025-12-13 16:47 ` ✗ Xe.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251127175023.1522538-9-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox