Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Stuart Summers <stuart.summers@intel.com>
Cc: intel-xe@lists.freedesktop.org, rodrigo.vivi@intel.com,
	matthew.brost@intel.com, matthew.d.roper@intel.com,
	fei.yang@intel.com, Stuart Summers <stuart.summers@intel.com>
Subject: [PATCH 02/11] drm/xe: Tolerate a missing graphics IP in xe_info_init()
Date: Tue, 10 Nov 2026 23:14:44 +0000	[thread overview]
Message-ID: <20261110231442.218721-15-stuart.summers@intel.com> (raw)
In-Reply-To: <20261110231442.218721-13-stuart.summers@intel.com>

A device without a graphics IP is still rejected a few lines further
down, but handle_gmdid() can already hand back a NULL graphics_ip, so
stop dereferencing it unconditionally and mirror what is done for media
instead. alloc_primary_gt() gets the same treatment, since it reads the
descriptor for every field it fills in.

No functional change: the graphics IP is still required.

Signed-off-by: Stuart Summers <stuart.summers@intel.com>
---
 drivers/gpu/drm/xe/xe_pci.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index a59bb1c9b478..34e8ffeeeb09 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -902,6 +902,9 @@ static struct xe_gt *alloc_primary_gt(struct xe_tile *tile,
 	struct xe_device *xe = tile_to_xe(tile);
 	struct xe_gt *gt;
 
+	if (!graphics_desc)
+		return NULL;
+
 	if (!xe_configfs_primary_gt_allowed(to_pci_dev(xe->drm.dev))) {
 		xe_tile_info(tile, "Primary GT disabled via configfs\n");
 		return NULL;
@@ -1054,9 +1057,14 @@ static int xe_info_init(struct xe_device *xe,
 	xe->info.step.graphics = probed_info->step.graphics;
 	xe->info.step.media = probed_info->step.media;
 
-	xe->info.graphics_verx100 = graphics_ip->verx100;
-	xe->info.graphics_name = graphics_ip->name;
-	graphics_desc = graphics_ip->desc;
+	if (graphics_ip) {
+		xe->info.graphics_verx100 = graphics_ip->verx100;
+		xe->info.graphics_name = graphics_ip->name;
+		graphics_desc = graphics_ip->desc;
+	} else {
+		xe->info.graphics_name = "none";
+		graphics_desc = NULL;
+	}
 
 	if (media_ip) {
 		xe->info.media_verx100 = media_ip->verx100;
@@ -1067,16 +1075,19 @@ static int xe_info_init(struct xe_device *xe,
 		media_desc = NULL;
 	}
 
-	xe->info.has_access_counter = graphics_desc->has_access_counter;
-	xe->info.has_asid = graphics_desc->has_asid;
-	xe->info.has_atomic_enable_pte_bit = graphics_desc->has_atomic_enable_pte_bit;
+	if (graphics_desc) {
+		xe->info.has_access_counter = graphics_desc->has_access_counter;
+		xe->info.has_asid = graphics_desc->has_asid;
+		xe->info.has_atomic_enable_pte_bit = graphics_desc->has_atomic_enable_pte_bit;
+		xe->info.has_range_tlb_inval = graphics_desc->has_range_tlb_inval;
+		xe->info.has_ctx_tlb_inval = graphics_desc->has_ctx_tlb_inval;
+		xe->info.has_usm = graphics_desc->has_usm;
+		xe->info.has_64bit_timestamp = graphics_desc->has_64bit_timestamp;
+	}
+
 	if (xe->info.platform != XE_PVC)
 		xe->info.has_device_atomics_on_smem = 1;
 
-	xe->info.has_range_tlb_inval = graphics_desc->has_range_tlb_inval;
-	xe->info.has_ctx_tlb_inval = graphics_desc->has_ctx_tlb_inval;
-	xe->info.has_usm = graphics_desc->has_usm;
-	xe->info.has_64bit_timestamp = graphics_desc->has_64bit_timestamp;
 	xe->info.has_mem_copy_instr = GRAPHICS_VER(xe) >= 20;
 
 	if (IS_SRIOV_VF(xe)) {
-- 
2.43.0


  parent reply	other threads:[~2026-11-10 23:15 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10 23:14 [PATCH 00/11] Allow boot with only media GT Stuart Summers
2026-11-10 23:14 ` [PATCH 01/11] drm/xe: Detect each GMD_ID IP in a loop Stuart Summers
2026-11-10 23:14 ` Stuart Summers [this message]
2026-11-10 23:14 ` [PATCH 03/11] drm/xe: Verify IP presence against GU_CNTL Stuart Summers
2026-11-10 23:14 ` [PATCH 04/11] drm/xe: Guard per-tile primary GT accesses Stuart Summers
2026-11-10 23:14 ` [PATCH 05/11] drm/xe: Stop assuming the root tile has a primary GT Stuart Summers
2026-11-11  2:59   ` sashiko-bot
2026-11-10 23:14 ` [PATCH 06/11] drm/xe: Do not claim flat CCS without a graphics IP Stuart Summers
2026-11-11  3:21   ` sashiko-bot
2026-11-10 23:14 ` [PATCH 07/11] drm/xe: Run page table updates on the media GT when there is no primary Stuart Summers
2026-11-11  3:53   ` sashiko-bot
2026-11-10 23:14 ` [PATCH 08/11] drm/xe: Document that gt_types_allowed=media now probes Stuart Summers
2026-11-10 23:14 ` [PATCH 09/11] drm/xe: Fall back to CPU copies when the tile cannot blit Stuart Summers
2026-11-11  4:25   ` sashiko-bot
2026-11-10 23:14 ` [PATCH 10/11] drm/xe: Require a fully visible VRAM BAR without a primary GT Stuart Summers
2026-11-11  4:38   ` sashiko-bot
2026-11-10 23:14 ` [PATCH 11/11] drm/xe: Allow probe " Stuart Summers
2026-11-11  4:57   ` sashiko-bot
2026-11-10 23:39 ` ✓ CI.KUnit: success for Allow boot with only media GT Patchwork
2026-11-11  0:14 ` ✓ Xe.CI.BAT: " Patchwork
2026-11-11  4:17 ` ✓ Xe.CI.FULL: " Patchwork
2026-11-12 12:21 ` [PATCH 00/11] " Piotr Piórkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261110231442.218721-15-stuart.summers@intel.com \
    --to=stuart.summers@intel.com \
    --cc=fei.yang@intel.com \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=matthew.brost@intel.com \
    --cc=matthew.d.roper@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox