From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-xe@lists.freedesktop.org
Subject: Re: [PATCH 2/4] drm/xe: Extract xe_gu_misc_irq_{postinstall,reset}()
Date: Mon, 09 Nov 2026 14:00:16 +0200 [thread overview]
Message-ID: <724fccfff0c8aa0f4b2146a9a3ef25656f10ca4c@intel.com> (raw)
In-Reply-To: <20261109114554.19597-3-ville.syrjala@linux.intel.com>
On Mon, 09 Nov 2026, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Make the GU_MISC interrupt setup a bit nicer by extracting
> it to its own functions.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/xe/xe_irq.c | 27 ++++++++++++++++++---------
> 1 file changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_irq.c b/drivers/gpu/drm/xe/xe_irq.c
> index 320fc64e7d4f..7c39d7a3cf8a 100644
> --- a/drivers/gpu/drm/xe/xe_irq.c
> +++ b/drivers/gpu/drm/xe/xe_irq.c
> @@ -645,6 +645,12 @@ static void vf_irq_reset(struct xe_device *xe)
> }
> }
>
> +static void xe_gu_misc_irq_reset(struct xe_device *xe)
> +{
> + mask_and_disable(xe_device_get_root_tile(xe),
> + GU_MISC_IRQ_OFFSET);
> +}
> +
> static void xe_irq_reset(struct xe_device *xe)
> {
> struct xe_tile *tile;
> @@ -665,8 +671,7 @@ static void xe_irq_reset(struct xe_device *xe)
> xelp_irq_reset(tile);
> }
>
> - tile = xe_device_get_root_tile(xe);
> - mask_and_disable(tile, GU_MISC_IRQ_OFFSET);
> + xe_gu_misc_irq_reset(xe);
> xe_display_irq_reset(xe);
> xe_i2c_irq_reset(xe);
>
> @@ -696,6 +701,16 @@ static void vf_irq_postinstall(struct xe_device *xe)
> xe_assert(xe, xe_device_has_memirq(xe));
> }
>
> +static void xe_gu_misc_irq_postinstall(struct xe_device *xe)
> +{
> + /*
> + * ASLE backlight operations are reported via GUnit GSE interrupts
> + * on the root tile.
> + */
> + unmask_and_enable(xe_device_get_root_tile(xe),
> + GU_MISC_IRQ_OFFSET, GU_MISC_GSE);
> +}
> +
> static void xe_irq_postinstall(struct xe_device *xe)
> {
> if (IS_SRIOV_VF(xe))
> @@ -711,13 +726,7 @@ static void xe_irq_postinstall(struct xe_device *xe)
>
> xe_display_irq_postinstall(xe);
> xe_i2c_irq_postinstall(xe);
> -
> - /*
> - * ASLE backlight operations are reported via GUnit GSE interrupts
> - * on the root tile.
> - */
> - unmask_and_enable(xe_device_get_root_tile(xe),
> - GU_MISC_IRQ_OFFSET, GU_MISC_GSE);
> + xe_gu_misc_irq_postinstall(xe);
>
> /* Enable top-level interrupts */
> if (GRAPHICS_VERx100(xe) >= 1210)
--
Jani Nikula, Intel
next prev parent reply other threads:[~2026-11-09 12:00 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 11:45 [PATCH 0/4] drm/xe: Clean up the GU_MISC irq handling Ville Syrjala
2026-11-09 11:45 ` [PATCH 1/4] drm/xe: s/xe_display_irq_enable()/xe_display_gse_irq_handler()/ Ville Syrjala
2026-11-09 11:59 ` Jani Nikula
2026-11-09 11:45 ` [PATCH 2/4] drm/xe: Extract xe_gu_misc_irq_{postinstall,reset}() Ville Syrjala
2026-11-09 12:00 ` Jani Nikula [this message]
2026-11-09 11:45 ` [PATCH 3/4] drm/xe: Only enable the GSE interrupt when display needs it Ville Syrjala
2026-11-09 12:03 ` Jani Nikula
2026-11-09 11:45 ` [PATCH 4/4] drm/xe: Use intel_display_gse_irq_handler() Ville Syrjala
2026-11-09 11:51 ` sashiko-bot
2026-11-09 12:28 ` Ville Syrjälä
2026-11-09 12:05 ` Jani Nikula
2026-11-09 12:15 ` Ville Syrjälä
2026-11-09 12:22 ` Jani Nikula
2026-11-09 12:34 ` Ville Syrjälä
2026-11-09 14:10 ` ✓ CI.KUnit: success for drm/xe: Clean up the GU_MISC irq handling Patchwork
2026-11-09 14:59 ` ✓ Xe.CI.BAT: " Patchwork
2026-11-09 16:28 ` ✗ Xe.CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=724fccfff0c8aa0f4b2146a9a3ef25656f10ca4c@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox