From: Gustavo Sousa <gustavo.sousa@intel.com>
To: Michal Wajdeczko <michal.wajdeczko@intel.com>,
<intel-xe@lists.freedesktop.org>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Subject: Re: [PATCH v2 3/6] drm/xe: Move xe->info.devid|revid initialization
Date: Mon, 25 May 2026 17:01:53 -0300 [thread overview]
Message-ID: <87mrxngswe.fsf@intel.com> (raw)
In-Reply-To: <20260525194109.16076-1-michal.wajdeczko@intel.com>
Michal Wajdeczko <michal.wajdeczko@intel.com> writes:
> The xe_info_init_early() is a place where we initialize those of
> the xe->info fields that do not require any additional hardware
> probes. Move the initialization of the devid/revid also there, but
> to avoid breaking the kunit helper, which also calls this function,
> keep their initialization separate in sub-function so we can easily
> stub it when running the kunit test.
>
> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
> Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
> ---
> v2: don't add devid/revid to xe_pci_fake_data (Gustavo)
> ---
> drivers/gpu/drm/xe/tests/xe_pci.c | 6 ++++++
> drivers/gpu/drm/xe/xe_device.c | 2 --
> drivers/gpu/drm/xe/xe_pci.c | 12 ++++++++++++
> 3 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/tests/xe_pci.c b/drivers/gpu/drm/xe/tests/xe_pci.c
> index 860409c579f8..9240aff779da 100644
> --- a/drivers/gpu/drm/xe/tests/xe_pci.c
> +++ b/drivers/gpu/drm/xe/tests/xe_pci.c
> @@ -311,6 +311,11 @@ const void *xe_pci_id_gen_param(struct kunit *test, const void *prev, char *desc
> }
> EXPORT_SYMBOL_IF_KUNIT(xe_pci_id_gen_param);
>
> +static void fake_init_devid(struct xe_device *xe)
> +{
> + /* Nothing to do, just keep zero. */
> +}
> +
> static int fake_read_gmdid(struct xe_device *xe, enum xe_gmdid_type type,
> u32 *ver, u32 *revid)
> {
> @@ -369,6 +374,7 @@ int xe_pci_fake_device_init(struct xe_device *xe)
> xe->sriov.__mode = data && data->sriov_mode ?
> data->sriov_mode : XE_SRIOV_MODE_NONE;
>
> + kunit_activate_static_stub(test, init_devid, fake_init_devid);
> kunit_activate_static_stub(test, read_gmdid, fake_read_gmdid);
> kunit_activate_static_stub(test, xe_info_probe_tile_count,
> fake_xe_info_probe_tile_count);
> diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
> index cdc7e0935c13..b498147dcf61 100644
> --- a/drivers/gpu/drm/xe/xe_device.c
> +++ b/drivers/gpu/drm/xe/xe_device.c
> @@ -521,8 +521,6 @@ struct xe_device *xe_device_create(struct pci_dev *pdev)
> if (err)
> return ERR_PTR(err);
>
> - xe->info.devid = pdev->device;
> - xe->info.revid = pdev->revision;
> xe->atomic_svm_timeslice_ms = 5;
> xe->min_run_period_lr_ms = 5;
>
> diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
> index b1f5f0098f26..6b1a4cb7ccb0 100644
> --- a/drivers/gpu/drm/xe/xe_pci.c
> +++ b/drivers/gpu/drm/xe/xe_pci.c
> @@ -727,6 +727,16 @@ static int handle_gmdid(struct xe_device *xe,
> return 0;
> }
>
> +static void init_devid(struct xe_device *xe)
> +{
> + struct pci_dev *pdev = to_pci_dev(xe->drm.dev);
> +
> + KUNIT_STATIC_STUB_REDIRECT(init_devid, xe);
> +
> + xe->info.devid = pdev->device;
> + xe->info.revid = pdev->revision;
> +}
> +
> /*
> * Initialize device info content that only depends on static driver_data
> * passed to the driver at probe time from PCI ID table.
> @@ -742,6 +752,8 @@ static int xe_info_init_early(struct xe_device *xe,
> xe->info.subplatform = subplatform_desc ?
> subplatform_desc->subplatform : XE_SUBPLATFORM_NONE;
>
> + init_devid(xe);
> +
> xe->info.dma_mask_size = desc->dma_mask_size;
> xe->info.va_bits = desc->va_bits;
> xe->info.vm_max_level = desc->vm_max_level;
> --
> 2.47.1
next prev parent reply other threads:[~2026-05-25 20:02 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-25 16:05 [PATCH 0/6] drm/xe: Misc initialization improvements Michal Wajdeczko
2026-05-25 16:05 ` [PATCH 1/6] drm/xe: Drop unused param from xe_device_create() Michal Wajdeczko
2026-05-25 18:13 ` Raag Jadav
2026-05-25 18:45 ` Gustavo Sousa
2026-05-25 16:05 ` [PATCH 2/6] drm/xe: Move xe->info.force_execlist initialization Michal Wajdeczko
2026-05-25 18:46 ` Gustavo Sousa
2026-05-25 16:05 ` [PATCH 3/6] drm/xe: Move xe->info.devid|revid initialization Michal Wajdeczko
2026-05-25 17:47 ` Gustavo Sousa
2026-05-25 18:25 ` Michal Wajdeczko
2026-05-25 19:12 ` Gustavo Sousa
2026-05-25 19:41 ` [PATCH v2 " Michal Wajdeczko
2026-05-25 20:01 ` Gustavo Sousa [this message]
2026-05-25 16:05 ` [PATCH 4/6] drm/xe: Separate early xe_device initialization Michal Wajdeczko
2026-05-25 18:21 ` Gustavo Sousa
2026-05-25 18:57 ` Michal Wajdeczko
2026-05-25 19:05 ` Gustavo Sousa
2026-05-25 19:00 ` Gustavo Sousa
2026-05-25 19:14 ` Michal Wajdeczko
2026-05-25 18:22 ` Raag Jadav
2026-05-25 16:05 ` [PATCH 5/6] drm/xe/pm: Don't access device in init_early() Michal Wajdeczko
2026-05-25 18:30 ` Raag Jadav
2026-05-25 18:47 ` Gustavo Sousa
2026-05-27 15:46 ` Rodrigo Vivi
2026-05-25 16:05 ` [PATCH 6/6] drm/xe/pm: Do early initialization " Michal Wajdeczko
2026-05-25 18:47 ` Gustavo Sousa
2026-05-25 16:36 ` ✓ CI.KUnit: success for drm/xe: Misc initialization improvements Patchwork
2026-05-25 17:42 ` ✓ Xe.CI.BAT: " Patchwork
2026-05-25 19:48 ` ✓ CI.KUnit: success for drm/xe: Misc initialization improvements (rev2) Patchwork
2026-05-25 20:49 ` ✓ Xe.CI.BAT: " Patchwork
2026-05-26 1:59 ` ✓ Xe.CI.FULL: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mrxngswe.fsf@intel.com \
--to=gustavo.sousa@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=michal.wajdeczko@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox