From: "Vivekanandan, Balasubramani" <balasubramani.vivekanandan@intel.com>
To: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>,
<intel-xe@lists.freedesktop.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Subject: Re: [PATCH v6 2/9] drm/xe/xe3: Add support for graphics IP version 30.03
Date: Mon, 16 Jun 2025 14:06:25 +0530 [thread overview]
Message-ID: <aE_Xif_MDeo_8s1A@bvivekan-mob1> (raw)
In-Reply-To: <20250613193146.3549862-3-dnyaneshwar.bhadane@intel.com>
On 14.06.2025 01:01, Dnyaneshwar Bhadane wrote:
> From: Matt Roper <matthew.d.roper@intel.com>
>
> Graphics version 30.03 should be treated the same as other Xe3 IP, but
> will have a slightly different set of workarounds.
>
> -v2: Merge and extend the WA onto existing entry (Bala)
This line is not necessary as it have been reverted.
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@inte.com>
Regards,
Bala
> -v3: Revert v2's feedback changes and keep entry saparate (Matt).
>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
> ---
> drivers/gpu/drm/xe/xe_pci.c | 1 +
> drivers/gpu/drm/xe/xe_wa.c | 4 ++++
> drivers/gpu/drm/xe/xe_wa_oob.rules | 4 ++++
> 3 files changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
> index 5d24cc320d72..8bb698786334 100644
> --- a/drivers/gpu/drm/xe/xe_pci.c
> +++ b/drivers/gpu/drm/xe/xe_pci.c
> @@ -184,6 +184,7 @@ static const struct xe_ip graphics_ips[] = {
> { 2004, "Xe2_LPG", &graphics_xe2 },
> { 3000, "Xe3_LPG", &graphics_xe2 },
> { 3001, "Xe3_LPG", &graphics_xe2 },
> + { 3003, "Xe3_LPG", &graphics_xe2 },
> };
>
> /* Pre-GMDID Media IPs */
> diff --git a/drivers/gpu/drm/xe/xe_wa.c b/drivers/gpu/drm/xe/xe_wa.c
> index 4a76de391abb..6baf369fb330 100644
> --- a/drivers/gpu/drm/xe/xe_wa.c
> +++ b/drivers/gpu/drm/xe/xe_wa.c
> @@ -644,6 +644,10 @@ static const struct xe_rtp_entry_sr engine_was[] = {
> XE_RTP_ACTIONS(SET(RING_PSMI_CTL(0), RC_SEMA_IDLE_MSG_DISABLE,
> XE_RTP_ACTION_FLAG(ENGINE_BASE)))
> },
> + { XE_RTP_NAME("14021402888"),
> + XE_RTP_RULES(GRAPHICS_VERSION(3003), FUNC(xe_rtp_match_first_render_or_compute)),
> + XE_RTP_ACTIONS(SET(HALF_SLICE_CHICKEN7, CLEAR_OPTIMIZATION_DISABLE))
> + },
> };
>
> static const struct xe_rtp_entry_sr lrc_was[] = {
> diff --git a/drivers/gpu/drm/xe/xe_wa_oob.rules b/drivers/gpu/drm/xe/xe_wa_oob.rules
> index b6ed8cfea938..9a691045831e 100644
> --- a/drivers/gpu/drm/xe/xe_wa_oob.rules
> +++ b/drivers/gpu/drm/xe/xe_wa_oob.rules
> @@ -33,9 +33,11 @@
> 14022293748 GRAPHICS_VERSION_RANGE(2001, 2002)
> GRAPHICS_VERSION(2004)
> GRAPHICS_VERSION_RANGE(3000, 3001)
> + GRAPHICS_VERSION(3003)
> 22019794406 GRAPHICS_VERSION_RANGE(2001, 2002)
> GRAPHICS_VERSION(2004)
> GRAPHICS_VERSION_RANGE(3000, 3001)
> + GRAPHICS_VERSION(3003)
> 22019338487 MEDIA_VERSION(2000)
> GRAPHICS_VERSION(2001)
> MEDIA_VERSION(3000), MEDIA_STEP(A0, B0), FUNC(xe_rtp_match_not_sriov_vf)
> @@ -57,8 +59,10 @@ no_media_l3 MEDIA_VERSION(3000)
> GRAPHICS_VERSION(1260), GRAPHICS_STEP(A0, B0)
> 16023105232 GRAPHICS_VERSION_RANGE(2001, 3001)
> MEDIA_VERSION_RANGE(1301, 3000)
> + GRAPHICS_VERSION(3003)
> 16026508708 GRAPHICS_VERSION_RANGE(1200, 3001)
> MEDIA_VERSION_RANGE(1300, 3000)
> + GRAPHICS_VERSION(3003)
>
> # SoC workaround - currently applies to all platforms with the following
> # primary GT GMDID
> --
> 2.34.1
>
next prev parent reply other threads:[~2025-06-16 8:37 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-13 19:31 [PATCH v6 0/9] Add WildCat Lake support Dnyaneshwar Bhadane
2025-06-13 19:31 ` [PATCH v6 1/9] drm/i915/xe3lpd: Add support for display version 30.02 Dnyaneshwar Bhadane
2025-06-13 19:31 ` [PATCH v6 2/9] drm/xe/xe3: Add support for graphics IP version 30.03 Dnyaneshwar Bhadane
2025-06-16 8:36 ` Vivekanandan, Balasubramani [this message]
2025-06-13 19:31 ` [PATCH v6 3/9] drm/xe/xe3: Add support for media IP version 30.02 Dnyaneshwar Bhadane
2025-06-16 9:47 ` Vivekanandan, Balasubramani
2025-06-13 19:31 ` [PATCH v6 4/9] drm/i915/xe3lpd: Update bandwidth parameters for display " Dnyaneshwar Bhadane
2025-06-13 19:31 ` [PATCH v6 5/9] drm/i915: Set max cdclk for display 30.02 Dnyaneshwar Bhadane
2025-06-13 19:31 ` [PATCH v6 6/9] drm/xe: Add Wildcat Lake device IDs to PTL list Dnyaneshwar Bhadane
2025-06-13 19:31 ` [PATCH v6 7/9] drm/i915/xe3lpd: Extend DMC load path for display Dnyaneshwar Bhadane
2025-06-13 19:31 ` [PATCH v6 8/9] drm/i915/wcl: C10 phy connected to port A and B Dnyaneshwar Bhadane
2025-06-16 8:38 ` Kandpal, Suraj
2025-06-16 16:01 ` Bhadane, Dnyaneshwar
2025-06-17 5:07 ` Kandpal, Suraj
2025-06-17 5:46 ` Bhadane, Dnyaneshwar
2025-06-17 5:58 ` Kandpal, Suraj
2025-06-13 19:31 ` [PATCH v6 9/9] drm/i915/xe3lpd: Extend WA 16023981245 for display 30.02 Dnyaneshwar Bhadane
2025-06-13 21:07 ` ✓ CI.KUnit: success for Add WildCat Lake support Patchwork
2025-06-13 21:22 ` ✗ CI.checksparse: warning " Patchwork
2025-06-13 21:47 ` ✓ Xe.CI.BAT: success " Patchwork
2025-06-15 20:06 ` ✗ Xe.CI.Full: failure " Patchwork
2025-06-18 6:47 ` Bhadane, Dnyaneshwar
2025-06-18 22:46 ` Matt Roper
-- strict thread matches above, loose matches on Subject: below --
2025-06-13 10:22 [PATCH v6 0/9] " Dnyaneshwar Bhadane
2025-06-13 10:22 ` [PATCH v6 2/9] drm/xe/xe3: Add support for graphics IP version 30.03 Dnyaneshwar Bhadane
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aE_Xif_MDeo_8s1A@bvivekan-mob1 \
--to=balasubramani.vivekanandan@intel.com \
--cc=dnyaneshwar.bhadane@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox