From: Matthew Brost <matthew.brost@intel.com>
To: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: <intel-xe@lists.freedesktop.org>
Subject: Re: [PATCH v6 11/30] drm/xe/vf: Close multi-GT GGTT shift race
Date: Mon, 6 Oct 2025 07:56:09 -0700 [thread overview]
Message-ID: <aOPYic7n1QVY2TJl@lstrano-desk.jf.intel.com> (raw)
In-Reply-To: <790758a6-3697-444c-95bc-1ce62d9cef6d@intel.com>
On Mon, Oct 06, 2025 at 04:27:36PM +0200, Michal Wajdeczko wrote:
>
>
> On 10/6/2025 1:10 PM, Matthew Brost wrote:
> > As multi-GT VF post-migration recovery can run in parallel on different
> > workqueues, but both GTs point to the same GGTT, only one GT needs to
> > shift the GGTT. However, both GTs need to know when this step has
> > completed. To coordinate this, perform the GGTT shift under the GGTT
> > lock. With shift being done under the lock, storing the shift value
> > becomes unnecessary.
> >
> > v3:
> > - Update commmit message (Tomasz)
> > v4:
> > - Move GGTT values to tile state (Michal)
> > - Use GGTT lock (Michal)
> > v5:
> > - Only take GGTT lock during recovery (CI)
> > - Drop goto in vf_get_submission_cfg (Michal)
> > - Add kernel doc around recovery in xe_gt_sriov_vf_query_config (Michal)
> >
> > Signed-off-by: Matthew Brost <matthew.brost@intel.com>
> > ---
> > drivers/gpu/drm/xe/xe_device_types.h | 3 +
> > drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 153 +++++++-------------
> > drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 5 +-
> > drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h | 7 +-
> > drivers/gpu/drm/xe/xe_guc.c | 2 +-
> > drivers/gpu/drm/xe/xe_tile_sriov_vf.c | 30 +++-
> > drivers/gpu/drm/xe/xe_tile_sriov_vf.h | 2 +-
> > drivers/gpu/drm/xe/xe_tile_sriov_vf_types.h | 23 +++
> > drivers/gpu/drm/xe/xe_vram.c | 6 +-
> > 9 files changed, 112 insertions(+), 119 deletions(-)
> > create mode 100644 drivers/gpu/drm/xe/xe_tile_sriov_vf_types.h
> >
> > diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
> > index 1d2718b70a5c..c66523bf4bf0 100644
> > --- a/drivers/gpu/drm/xe/xe_device_types.h
> > +++ b/drivers/gpu/drm/xe/xe_device_types.h
> > @@ -27,6 +27,7 @@
> > #include "xe_sriov_vf_ccs_types.h"
> > #include "xe_step_types.h"
> > #include "xe_survivability_mode_types.h"
> > +#include "xe_tile_sriov_vf_types.h"
> > #include "xe_validation.h"
> >
> > #if IS_ENABLED(CONFIG_DRM_XE_DEBUG)
> > @@ -193,6 +194,8 @@ struct xe_tile {
> > struct {
> > /** @sriov.vf.ggtt_balloon: GGTT regions excluded from use. */
> > struct xe_ggtt_node *ggtt_balloon[2];
> > + /** @sriov.vf.self_config: VF configuration data */
> > + struct xe_tile_sriov_vf_selfconfig self_config;
> > } vf;
> > } sriov;
> >
> > diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_vf.c b/drivers/gpu/drm/xe/xe_gt_sriov_vf.c
> > index 55a1ebbbf47f..d227c8a3ec81 100644
> > --- a/drivers/gpu/drm/xe/xe_gt_sriov_vf.c
> > +++ b/drivers/gpu/drm/xe/xe_gt_sriov_vf.c
> > @@ -436,42 +436,65 @@ u32 xe_gt_sriov_vf_gmdid(struct xe_gt *gt)
> > return value;
> > }
> >
> > -static int vf_get_ggtt_info(struct xe_gt *gt)
> > +static int vf_get_ggtt_info(struct xe_gt *gt, bool recovery)
> > {
> > - struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;
> > + struct xe_tile_sriov_vf_selfconfig *config =
> > + >_to_tile(gt)->sriov.vf.self_config;
>
> maybe
> xe_tile *tile = gt_to_tile(gt);
> struct xe_tile_sriov_vf_selfconfig *config = tile->sriov.vf.self_config;
>
> to avoid line split
>
> > + struct xe_ggtt *ggtt = gt_to_tile(gt)->mem.ggtt;
>
> then
> struct xe_ggtt *ggtt = tile->mem.ggtt;
>
Ok.
> > struct xe_guc *guc = >->uc.guc;
> > u64 start, size;
> > + s64 shift;
> > int err;
> >
> > xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> >
> > + /*
> > + * We only only take the GGTT lock when potentially shifting GGTTs to
> > + * make this step visable to all GTs which share a GGTT. Also the GGTT
> > + * lock is not initialized during xe_gt_init_early when this function
> > + * can also be called.
>
> hmm, the real fix should be that GGTT lock is initialized right after GGTT was allocated
> it looks that just split between GGTT alloc() and __init_early() was not ideal
>
> note that while almost similar pattern was done for tile, in xe_tile_init_early() the pcode mutex is initialized
>
> alternatively we can change VF to do not perform full query when doing early bootstrap as it is looking just for the GMDID
>
I looked at that but the GGTT init early relies on GT W/A being applied here:
286 if (GRAPHICS_VERx100(xe) >= 1270)
287 ggtt->pt_ops = (ggtt->tile->media_gt &&
288 XE_GT_WA(ggtt->tile->media_gt, 22019338487)) ||
289 XE_GT_WA(ggtt->tile->primary_gt, 22019338487) ?
290 &xelpg_pt_wa_ops : &xelpg_pt_ops;
291 else
292 ggtt->pt_ops = &xelp_pt_ops;
GT W/A are applied in GT init early, thus we have circular dependency.
But I think moving the lock init to xe_gt_alloc() should work.
> > + */
> > + if (recovery)
> > + mutex_lock(&ggtt->lock);
>
> then we could use
>
> guard(mutex)(&ggtt->lock)
>
> > +
> > err = guc_action_query_single_klv64(guc, GUC_KLV_VF_CFG_GGTT_START_KEY, &start);
> > if (unlikely(err))
> > - return err;
> > + goto out;
> >
> > err = guc_action_query_single_klv64(guc, GUC_KLV_VF_CFG_GGTT_SIZE_KEY, &size);
> > if (unlikely(err))
> > - return err;
> > + goto out;
> >
> > if (config->ggtt_size && config->ggtt_size != size) {
> > xe_gt_sriov_err(gt, "Unexpected GGTT reassignment: %lluK != %lluK\n",
> > size / SZ_1K, config->ggtt_size / SZ_1K);
> > - return -EREMCHG;
> > + err = -EREMCHG;
> > + goto out;
> > }
> >
> > xe_gt_sriov_dbg_verbose(gt, "GGTT %#llx-%#llx = %lluK\n",
> > start, start + size - 1, size / SZ_1K);
> >
> > - config->ggtt_shift = start - (s64)config->ggtt_base;
> > + shift = start - (s64)config->ggtt_base;
> > config->ggtt_base = start;
> > config->ggtt_size = size;
> > + err = config->ggtt_size ? 0 : -ENODATA;
> >
> > - return config->ggtt_size ? 0 : -ENODATA;
> > + if (!err && shift && recovery) {
>
> maybe "recovery" is not needed:
>
> if (!err && shift && shift != start)
>
Do you mean remove the recovery argument all together?
That might work...
> > + xe_gt_sriov_info(gt, "Shifting GGTT base by %lld to 0x%016llx\n",
> > + shift, config->ggtt_base);
> > + xe_tile_sriov_vf_fixup_ggtt_nodes(gt_to_tile(gt), shift);
> > + }
> > +out:
> > + if (recovery)
> > + mutex_unlock(&ggtt->lock);
> > + return err;
> > }
> >
> > static int vf_get_lmem_info(struct xe_gt *gt)
> > {
> > - struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;
> > + struct xe_tile_sriov_vf_selfconfig *config =
> > + >_to_tile(gt)->sriov.vf.self_config;
> > struct xe_guc *guc = >->uc.guc;
> > char size_str[10];
> > u64 size;
> > @@ -544,17 +567,20 @@ static void vf_cache_gmdid(struct xe_gt *gt)
> > /**
> > * xe_gt_sriov_vf_query_config - Query SR-IOV config data over MMIO.
> > * @gt: the &xe_gt
> > + * @recovery: VF post migration recovery path
> > *
> > - * This function is for VF use only.
> > + * This function is for VF use only. If recovery is set, the GGTT shift will be
> > + * performed under GGTT lock making this step visable to all GTs which share a
> > + * GGTT.
>
> hmm, the question is: why GGTT query can't be done under lock even without 'recovery' ?
>
See above, I think we can fix that one.
> > *
> > * Return: 0 on success or a negative error code on failure.
> > */
> > -int xe_gt_sriov_vf_query_config(struct xe_gt *gt)
> > +int xe_gt_sriov_vf_query_config(struct xe_gt *gt, bool recovery)
> > {
> > struct xe_device *xe = gt_to_xe(gt);
> > int err;
> >
> > - err = vf_get_ggtt_info(gt);
> > + err = vf_get_ggtt_info(gt, recovery);
> > if (unlikely(err))
> > return err;
> >
> > @@ -584,80 +610,16 @@ int xe_gt_sriov_vf_query_config(struct xe_gt *gt)
> > */
> > u16 xe_gt_sriov_vf_guc_ids(struct xe_gt *gt)
> > {
> > - xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> > - xe_gt_assert(gt, gt->sriov.vf.guc_version.major);
> > - xe_gt_assert(gt, gt->sriov.vf.self_config.num_ctxs);
> > -
> > - return gt->sriov.vf.self_config.num_ctxs;
> > -}
> > -
> > -/**
> > - * xe_gt_sriov_vf_lmem - VF LMEM configuration.
> > - * @gt: the &xe_gt
> > - *
> > - * This function is for VF use only.
> > - *
> > - * Return: size of the LMEM assigned to VF.
> > - */
> > -u64 xe_gt_sriov_vf_lmem(struct xe_gt *gt)
> > -{
> > - xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> > - xe_gt_assert(gt, gt->sriov.vf.guc_version.major);
> > - xe_gt_assert(gt, gt->sriov.vf.self_config.lmem_size);
> > -
> > - return gt->sriov.vf.self_config.lmem_size;
> > -}
> > -
> > -/**
> > - * xe_gt_sriov_vf_ggtt - VF GGTT configuration.
> > - * @gt: the &xe_gt
> > - *
> > - * This function is for VF use only.
> > - *
> > - * Return: size of the GGTT assigned to VF.
> > - */
> > -u64 xe_gt_sriov_vf_ggtt(struct xe_gt *gt)
> > -{
> > - xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> > - xe_gt_assert(gt, gt->sriov.vf.guc_version.major);
> > - xe_gt_assert(gt, gt->sriov.vf.self_config.ggtt_size);
> > -
> > - return gt->sriov.vf.self_config.ggtt_size;
> > -}
> > + struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;
> > + u16 val;
> >
> > -/**
> > - * xe_gt_sriov_vf_ggtt_base - VF GGTT base offset.
> > - * @gt: the &xe_gt
> > - *
> > - * This function is for VF use only.
> > - *
> > - * Return: base offset of the GGTT assigned to VF.
> > - */
> > -u64 xe_gt_sriov_vf_ggtt_base(struct xe_gt *gt)
> > -{
> > xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> > xe_gt_assert(gt, gt->sriov.vf.guc_version.major);
> > - xe_gt_assert(gt, gt->sriov.vf.self_config.ggtt_size);
> > -
> > - return gt->sriov.vf.self_config.ggtt_base;
> > -}
> >
> > -/**
> > - * xe_gt_sriov_vf_ggtt_shift - Return shift in GGTT range due to VF migration
> > - * @gt: the &xe_gt struct instance
> > - *
> > - * This function is for VF use only.
> > - *
> > - * Return: The shift value; could be negative
> > - */
> > -s64 xe_gt_sriov_vf_ggtt_shift(struct xe_gt *gt)
> > -{
> > - struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;
> > + xe_gt_assert(gt, config->num_ctxs);
> > + val = config->num_ctxs;
> >
> > - xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> > - xe_gt_assert(gt, xe_gt_is_main_type(gt));
> > -
> > - return config->ggtt_shift;
> > + return val;
> > }
> >
> > static int relay_action_handshake(struct xe_gt *gt, u32 *major, u32 *minor)
> > @@ -1057,6 +1019,8 @@ void xe_gt_sriov_vf_write32(struct xe_gt *gt, struct xe_reg reg, u32 val)
> > */
> > void xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p)
> > {
> > + struct xe_tile_sriov_vf_selfconfig *tconfig =
> > + >_to_tile(gt)->sriov.vf.self_config;
> > struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config;
> > struct xe_device *xe = gt_to_xe(gt);
> > char buf[10];
> > @@ -1064,17 +1028,15 @@ void xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p)
> > xe_gt_assert(gt, IS_SRIOV_VF(gt_to_xe(gt)));
> >
> > drm_printf(p, "GGTT range:\t%#llx-%#llx\n",
> > - config->ggtt_base,
> > - config->ggtt_base + config->ggtt_size - 1);
> > -
> > - string_get_size(config->ggtt_size, 1, STRING_UNITS_2, buf, sizeof(buf));
> > - drm_printf(p, "GGTT size:\t%llu (%s)\n", config->ggtt_size, buf);
> > + tconfig->ggtt_base,
> > + tconfig->ggtt_base + tconfig->ggtt_size - 1);
> >
> > - drm_printf(p, "GGTT shift on last restore:\t%lld\n", config->ggtt_shift);
> > + string_get_size(tconfig->ggtt_size, 1, STRING_UNITS_2, buf, sizeof(buf));
> > + drm_printf(p, "GGTT size:\t%llu (%s)\n", tconfig->ggtt_size, buf);
> >
> > if (IS_DGFX(xe) && xe_gt_is_main_type(gt)) {
> > - string_get_size(config->lmem_size, 1, STRING_UNITS_2, buf, sizeof(buf));
> > - drm_printf(p, "LMEM size:\t%llu (%s)\n", config->lmem_size, buf);
> > + string_get_size(tconfig->lmem_size, 1, STRING_UNITS_2, buf, sizeof(buf));
> > + drm_printf(p, "LMEM size:\t%llu (%s)\n", tconfig->lmem_size, buf);
> > }
> >
> > drm_printf(p, "GuC contexts:\t%u\n", config->num_ctxs);
> > @@ -1161,21 +1123,16 @@ static size_t post_migration_scratch_size(struct xe_device *xe)
> > static int vf_post_migration_fixups(struct xe_gt *gt)
> > {
> > void *buf = gt->sriov.vf.migration.scratch;
> > - s64 shift;
> > int err;
> >
> > - err = xe_gt_sriov_vf_query_config(gt);
> > + err = xe_gt_sriov_vf_query_config(gt, true);
> > if (err)
> > return err;
> >
> > - shift = xe_gt_sriov_vf_ggtt_shift(gt);
> > - if (shift) {
> > - xe_tile_sriov_vf_fixup_ggtt_nodes(gt_to_tile(gt), shift);
> > - xe_gt_sriov_vf_default_lrcs_hwsp_rebase(gt);
> > - err = xe_guc_contexts_hwsp_rebase(>->uc.guc, buf);
> > - if (err)
> > - return err;
> > - }
> > + xe_gt_sriov_vf_default_lrcs_hwsp_rebase(gt);
> > + err = xe_guc_contexts_hwsp_rebase(>->uc.guc, buf);
> > + if (err)
> > + return err;
> >
> > return 0;
> > }
> > diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_vf.h b/drivers/gpu/drm/xe/xe_gt_sriov_vf.h
> > index 0adebf8aa419..47ed8d513571 100644
> > --- a/drivers/gpu/drm/xe/xe_gt_sriov_vf.h
> > +++ b/drivers/gpu/drm/xe/xe_gt_sriov_vf.h
> > @@ -18,7 +18,7 @@ int xe_gt_sriov_vf_bootstrap(struct xe_gt *gt);
> > void xe_gt_sriov_vf_guc_versions(struct xe_gt *gt,
> > struct xe_uc_fw_version *wanted,
> > struct xe_uc_fw_version *found);
> > -int xe_gt_sriov_vf_query_config(struct xe_gt *gt);
> > +int xe_gt_sriov_vf_query_config(struct xe_gt *gt, bool recovery);
> > int xe_gt_sriov_vf_connect(struct xe_gt *gt);
> > int xe_gt_sriov_vf_query_runtime(struct xe_gt *gt);
> > void xe_gt_sriov_vf_migrated_event_handler(struct xe_gt *gt);
> > @@ -29,9 +29,6 @@ bool xe_gt_sriov_vf_recovery_pending(struct xe_gt *gt);
> > u32 xe_gt_sriov_vf_gmdid(struct xe_gt *gt);
> > u16 xe_gt_sriov_vf_guc_ids(struct xe_gt *gt);
> > u64 xe_gt_sriov_vf_lmem(struct xe_gt *gt);
> > -u64 xe_gt_sriov_vf_ggtt(struct xe_gt *gt);
> > -u64 xe_gt_sriov_vf_ggtt_base(struct xe_gt *gt);
> > -s64 xe_gt_sriov_vf_ggtt_shift(struct xe_gt *gt);
> >
> > u32 xe_gt_sriov_vf_read32(struct xe_gt *gt, struct xe_reg reg);
> > void xe_gt_sriov_vf_write32(struct xe_gt *gt, struct xe_reg reg, u32 val);
> > diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h b/drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h
> > index e753646debc4..1796d4caf62f 100644
> > --- a/drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h
> > +++ b/drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h
> > @@ -6,6 +6,7 @@
> > #ifndef _XE_GT_SRIOV_VF_TYPES_H_
> > #define _XE_GT_SRIOV_VF_TYPES_H_
> >
> > +#include <linux/rwsem.h>
> > #include <linux/types.h>
> > #include <linux/workqueue.h>
> > #include "xe_uc_fw_types.h"
> > @@ -14,12 +15,6 @@
> > * struct xe_gt_sriov_vf_selfconfig - VF configuration data.
> > */
> > struct xe_gt_sriov_vf_selfconfig {
> > - /** @ggtt_base: assigned base offset of the GGTT region. */
> > - u64 ggtt_base;
> > - /** @ggtt_size: assigned size of the GGTT region. */
> > - u64 ggtt_size;
> > - /** @ggtt_shift: difference in ggtt_base on last migration */
> > - s64 ggtt_shift;
> > /** @lmem_size: assigned size of the LMEM. */
> > u64 lmem_size;
> > /** @num_ctxs: assigned number of GuC submission context IDs. */
> > diff --git a/drivers/gpu/drm/xe/xe_guc.c b/drivers/gpu/drm/xe/xe_guc.c
> > index d5adbbb013ec..c016a11b6ab1 100644
> > --- a/drivers/gpu/drm/xe/xe_guc.c
> > +++ b/drivers/gpu/drm/xe/xe_guc.c
> > @@ -713,7 +713,7 @@ static int vf_guc_init_noalloc(struct xe_guc *guc)
> > if (err)
> > return err;
> >
> > - err = xe_gt_sriov_vf_query_config(gt);
> > + err = xe_gt_sriov_vf_query_config(gt, false);
> > if (err)
> > return err;
> >
> > diff --git a/drivers/gpu/drm/xe/xe_tile_sriov_vf.c b/drivers/gpu/drm/xe/xe_tile_sriov_vf.c
> > index f221dbed16f0..074981e2ef07 100644
> > --- a/drivers/gpu/drm/xe/xe_tile_sriov_vf.c
> > +++ b/drivers/gpu/drm/xe/xe_tile_sriov_vf.c
> > @@ -9,7 +9,6 @@
> >
> > #include "xe_assert.h"
> > #include "xe_ggtt.h"
> > -#include "xe_gt_sriov_vf.h"
> > #include "xe_sriov.h"
> > #include "xe_sriov_printk.h"
> > #include "xe_tile_sriov_vf.h"
> > @@ -40,10 +39,10 @@ static int vf_init_ggtt_balloons(struct xe_tile *tile)
> > *
> > * Return: 0 on success or a negative error code on failure.
> > */
> > -int xe_tile_sriov_vf_balloon_ggtt_locked(struct xe_tile *tile)
> > +static int xe_tile_sriov_vf_balloon_ggtt_locked(struct xe_tile *tile)
> > {
> > - u64 ggtt_base = xe_gt_sriov_vf_ggtt_base(tile->primary_gt);
> > - u64 ggtt_size = xe_gt_sriov_vf_ggtt(tile->primary_gt);
> > + u64 ggtt_base = tile->sriov.vf.self_config.ggtt_base;
> > + u64 ggtt_size = tile->sriov.vf.self_config.ggtt_size;
> > struct xe_device *xe = tile_to_xe(tile);
> > u64 wopcm = xe_wopcm_size(xe);
> > u64 start, end;
> > @@ -244,11 +243,30 @@ void xe_tile_sriov_vf_fixup_ggtt_nodes(struct xe_tile *tile, s64 shift)
>
> what about naming style to use _locked suffix in function name if it expects to be already protected ?
Sure.
Matt
> > {
> > struct xe_ggtt *ggtt = tile->mem.ggtt;
> >
> > - mutex_lock(&ggtt->lock);
> > + lockdep_assert_held(&ggtt->lock);
> >
> > xe_tile_sriov_vf_deballoon_ggtt_locked(tile);
> > xe_ggtt_shift_nodes_locked(ggtt, shift);
> > xe_tile_sriov_vf_balloon_ggtt_locked(tile);
> > +}
> >
> > - mutex_unlock(&ggtt->lock);
> > +/**
> > + * xe_tile_sriov_vf_lmem - VF LMEM configuration.
> > + * @tile: the &xe_tile
> > + *
> > + * This function is for VF use only.
> > + *
> > + * Return: size of the LMEM assigned to VF.
> > + */
> > +u64 xe_tile_sriov_vf_lmem(struct xe_tile *tile)
> > +{
> > + struct xe_tile_sriov_vf_selfconfig *config = &tile->sriov.vf.self_config;
> > + u64 val;
> > +
> > + xe_tile_assert(tile, IS_SRIOV_VF(tile_to_xe(tile)));
> > +
> > + xe_tile_assert(tile, config->lmem_size);
> > + val = config->lmem_size;
> > +
> > + return val;
> > }
> > diff --git a/drivers/gpu/drm/xe/xe_tile_sriov_vf.h b/drivers/gpu/drm/xe/xe_tile_sriov_vf.h
> > index 93eb043171e8..54e7f2a5c4e4 100644
> > --- a/drivers/gpu/drm/xe/xe_tile_sriov_vf.h
> > +++ b/drivers/gpu/drm/xe/xe_tile_sriov_vf.h
> > @@ -11,8 +11,8 @@
> > struct xe_tile;
> >
> > int xe_tile_sriov_vf_prepare_ggtt(struct xe_tile *tile);
> > -int xe_tile_sriov_vf_balloon_ggtt_locked(struct xe_tile *tile);
> > void xe_tile_sriov_vf_deballoon_ggtt_locked(struct xe_tile *tile);
> > void xe_tile_sriov_vf_fixup_ggtt_nodes(struct xe_tile *tile, s64 shift);
> > +u64 xe_tile_sriov_vf_lmem(struct xe_tile *tile);
> >
> > #endif
> > diff --git a/drivers/gpu/drm/xe/xe_tile_sriov_vf_types.h b/drivers/gpu/drm/xe/xe_tile_sriov_vf_types.h
> > new file mode 100644
> > index 000000000000..140717f81d8f
> > --- /dev/null
> > +++ b/drivers/gpu/drm/xe/xe_tile_sriov_vf_types.h
> > @@ -0,0 +1,23 @@
> > +/* SPDX-License-Identifier: MIT */
> > +/*
> > + * Copyright © 2025 Intel Corporation
> > + */
> > +
> > +#ifndef _XE_TILE_SRIOV_VF_TYPES_H_
> > +#define _XE_TILE_SRIOV_VF_TYPES_H_
> > +
> > +#include <linux/mutex.h>
> > +
> > +/**
> > + * struct xe_tile_sriov_vf_selfconfig - VF configuration data.
> > + */
> > +struct xe_tile_sriov_vf_selfconfig {
> > + /** @ggtt_base: assigned base offset of the GGTT region. */
> > + u64 ggtt_base;
> > + /** @ggtt_size: assigned size of the GGTT region. */
> > + u64 ggtt_size;
> > + /** @lmem_size: assigned size of the LMEM. */
> > + u64 lmem_size;
> > +};
> > +
> > +#endif
> > diff --git a/drivers/gpu/drm/xe/xe_vram.c b/drivers/gpu/drm/xe/xe_vram.c
> > index 7adfccf68e4c..70bcbb188867 100644
> > --- a/drivers/gpu/drm/xe/xe_vram.c
> > +++ b/drivers/gpu/drm/xe/xe_vram.c
> > @@ -17,10 +17,10 @@
> > #include "xe_device.h"
> > #include "xe_force_wake.h"
> > #include "xe_gt_mcr.h"
> > -#include "xe_gt_sriov_vf.h"
> > #include "xe_mmio.h"
> > #include "xe_module.h"
> > #include "xe_sriov.h"
> > +#include "xe_tile_sriov_vf.h"
> > #include "xe_ttm_vram_mgr.h"
> > #include "xe_vram.h"
> > #include "xe_vram_types.h"
> > @@ -238,9 +238,9 @@ static int tile_vram_size(struct xe_tile *tile, u64 *vram_size,
> > offset = 0;
> > for_each_tile(t, xe, id)
> > for_each_if(t->id < tile->id)
> > - offset += xe_gt_sriov_vf_lmem(t->primary_gt);
> > + offset += xe_tile_sriov_vf_lmem(t);
> >
> > - *tile_size = xe_gt_sriov_vf_lmem(gt);
> > + *tile_size = xe_tile_sriov_vf_lmem(tile);
> > *vram_size = *tile_size;
> > *tile_offset = offset;
> >
>
next prev parent reply other threads:[~2025-10-06 14:56 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-06 11:10 [PATCH v6 00/30] VF migration redesign Matthew Brost
2025-10-06 11:10 ` [PATCH v6 01/30] drm/xe: Add NULL checks to scratch LRC allocation Matthew Brost
2025-10-06 21:51 ` Lis, Tomasz
2025-10-06 11:10 ` [PATCH v6 02/30] drm/xe: Save off position in ring in which a job was programmed Matthew Brost
2025-10-06 11:10 ` [PATCH v6 03/30] drm/xe/guc: Track pending-enable source in submission state Matthew Brost
2025-10-06 11:10 ` [PATCH v6 04/30] drm/xe: Track LR jobs in DRM scheduler pending list Matthew Brost
2025-10-06 11:10 ` [PATCH v6 05/30] drm/xe: Don't change LRC ring head on job resubmission Matthew Brost
2025-10-06 11:10 ` [PATCH v6 06/30] drm/xe: Make LRC W/A scratch buffer usage consistent Matthew Brost
2025-10-06 11:10 ` [PATCH v6 07/30] drm/xe/vf: Add xe_gt_recovery_pending helper Matthew Brost
2025-10-06 13:10 ` Michal Wajdeczko
2025-10-06 11:10 ` [PATCH v6 08/30] drm/xe/vf: Make VF recovery run on per-GT worker Matthew Brost
2025-10-06 11:10 ` [PATCH v6 09/30] drm/xe/vf: Abort H2G sends during VF post-migration recovery Matthew Brost
2025-10-06 11:10 ` [PATCH v6 10/30] drm/xe/vf: Remove memory allocations from VF post migration recovery Matthew Brost
2025-10-06 11:10 ` [PATCH v6 11/30] drm/xe/vf: Close multi-GT GGTT shift race Matthew Brost
2025-10-06 14:27 ` Michal Wajdeczko
2025-10-06 14:56 ` Matthew Brost [this message]
2025-10-06 11:10 ` [PATCH v6 12/30] drm/xe/vf: Teardown VF post migration worker on driver unload Matthew Brost
2025-10-06 11:10 ` [PATCH v6 13/30] drm/xe/vf: Don't allow GT reset to be queued during VF post migration recovery Matthew Brost
2025-10-06 11:10 ` [PATCH v6 14/30] drm/xe/vf: Wakeup in GuC backend on " Matthew Brost
2025-10-06 14:35 ` Michal Wajdeczko
2025-10-06 15:54 ` Matthew Brost
2025-10-06 22:27 ` Lis, Tomasz
2025-10-06 23:07 ` Matthew Brost
2025-10-06 11:10 ` [PATCH v6 15/30] drm/xe/vf: Avoid indefinite blocking in preempt rebind worker for VFs supporting migration Matthew Brost
2025-10-06 11:10 ` [PATCH v6 16/30] drm/xe/vf: Use GUC_HXG_TYPE_EVENT for GuC context register Matthew Brost
2025-10-06 14:51 ` Michal Wajdeczko
2025-10-06 16:02 ` Matthew Brost
2025-10-06 22:21 ` Lis, Tomasz
2025-10-06 22:57 ` Matthew Brost
2025-10-06 11:10 ` [PATCH v6 17/30] drm/xe/vf: Flush and stop CTs in VF post migration recovery Matthew Brost
2025-10-06 11:10 ` [PATCH v6 18/30] drm/xe/vf: Reset TLB invalidations during " Matthew Brost
2025-10-06 11:10 ` [PATCH v6 19/30] drm/xe/vf: Kickstart after resfix in " Matthew Brost
2025-10-06 11:10 ` [PATCH v6 20/30] drm/xe/vf: Start CTs before resfix " Matthew Brost
2025-10-06 21:50 ` Lis, Tomasz
2025-10-06 11:10 ` [PATCH v6 21/30] drm/xe/vf: Abort VF post migration recovery on failure Matthew Brost
2025-10-06 11:10 ` [PATCH v6 22/30] drm/xe/vf: Replay GuC submission state on pause / unpause Matthew Brost
2025-10-06 11:10 ` [PATCH v6 23/30] drm/xe: Move queue init before LRC creation Matthew Brost
2025-10-06 15:22 ` Michal Wajdeczko
2025-10-06 21:33 ` Lis, Tomasz
2025-10-06 11:10 ` [PATCH v6 24/30] drm/xe/vf: Add debug prints for GuC replaying state during VF recovery Matthew Brost
2025-10-06 11:10 ` [PATCH v6 25/30] drm/xe/vf: Workaround for race condition in GuC firmware during VF pause Matthew Brost
2025-10-06 11:10 ` [PATCH v6 26/30] drm/xe: Use PPGTT addresses for TLB invalidation to avoid GGTT fixups Matthew Brost
2025-10-06 11:10 ` [PATCH v6 27/30] drm/xe/vf: Use primary GT ordered work queue on media GT on PTL VF Matthew Brost
2025-10-06 22:24 ` Lucas De Marchi
2025-10-06 22:51 ` Matthew Brost
2025-10-07 17:00 ` Lucas De Marchi
2025-10-07 17:22 ` Matthew Brost
2025-10-07 20:36 ` Lucas De Marchi
2025-10-07 21:18 ` Matthew Brost
2025-10-06 11:10 ` [PATCH v6 28/30] drm/xe/vf: Ensure media GT VF recovery runs after primary GT on PTL Matthew Brost
2025-10-06 11:10 ` [PATCH v6 29/30] drm/xe/vf: Rebase CCS save/restore BB GGTT addresses Matthew Brost
2025-10-06 11:10 ` [PATCH v6 30/30] drm/xe/guc: Increase wait timeout to 2sec after BUSY reply from GuC Matthew Brost
2025-10-06 11:17 ` ✗ CI.checkpatch: warning for VF migration redesign (rev6) Patchwork
2025-10-06 11:18 ` ✓ CI.KUnit: success " Patchwork
2025-10-06 12:24 ` ✗ Xe.CI.BAT: failure " Patchwork
2025-10-06 14:28 ` ✗ Xe.CI.Full: " Patchwork
2025-10-07 0:20 ` [PATCH v6 00/30] VF migration redesign Niranjana Vishwanathapura
2025-10-07 1:11 ` Matthew Brost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aOPYic7n1QVY2TJl@lstrano-desk.jf.intel.com \
--to=matthew.brost@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=michal.wajdeczko@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox