From: Ross Philipson <ross.philipson@gmail.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org,
linux-integrity@vger.kernel.org, linux-doc@vger.kernel.org,
linux-crypto@vger.kernel.org, kexec@lists.infradead.org,
linux-efi@vger.kernel.org, iommu@lists.linux.dev
Cc: ross.philipson@gmail.com, dpsmith@apertussolutions.com,
tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
hpa@zytor.com, dave.hansen@linux.intel.com, ardb@kernel.org,
mjg59@srcf.ucam.org, James.Bottomley@hansenpartnership.com,
peterhuewe@gmx.de, jarkko@kernel.org, jgg@ziepe.ca,
luto@amacapital.net, nivedita@alum.mit.edu,
herbert@gondor.apana.org.au, davem@davemloft.net, corbet@lwn.net,
ebiederm@xmission.com, dwmw2@infradead.org,
baolu.lu@linux.intel.com, kanth.ghatraju@oracle.com,
daniel.kiper@oracle.com, andrew.cooper3@citrix.com,
trenchboot-devel@googlegroups.com
Subject: [PATCH v16 37/38] x86/efistub: EFI stub DRTM support for Secure Launch
Date: Fri, 15 May 2026 14:14:09 -0700 [thread overview]
Message-ID: <20260515211410.31440-38-ross.philipson@gmail.com> (raw)
In-Reply-To: <20260515211410.31440-1-ross.philipson@gmail.com>
From: Ard Biesheuvel <ardb@kernel.org>
Invoke the Secure Launch protocol exposed by the boot loader at the
appropriate time to perform a measured launch of the decompressed
kernel after ExitBootServices().
Co-developed-by: Ross Philipson <ross.philipson@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ross Philipson <ross.philipson@gmail.com>
---
drivers/firmware/efi/libstub/Makefile | 1 +
drivers/firmware/efi/libstub/efistub.h | 24 ++++++++++++++
drivers/firmware/efi/libstub/x86-slaunch.c | 38 ++++++++++++++++++++++
drivers/firmware/efi/libstub/x86-stub.c | 27 ++++++++++++---
4 files changed, 86 insertions(+), 4 deletions(-)
create mode 100644 drivers/firmware/efi/libstub/x86-slaunch.c
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index e386ffd009b7..fd5eaf3142b2 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -86,6 +86,7 @@ lib-$(CONFIG_ARM) += arm32-stub.o
lib-$(CONFIG_ARM64) += kaslr.o arm64.o arm64-stub.o smbios.o
lib-$(CONFIG_X86) += x86-stub.o smbios.o
lib-$(CONFIG_X86_64) += x86-5lvl.o
+lib-$(CONFIG_SECURE_LAUNCH) += x86-slaunch.o
lib-$(CONFIG_RISCV) += kaslr.o riscv.o riscv-stub.o
lib-$(CONFIG_LOONGARCH) += loongarch.o loongarch-stub.o
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index 979a21818cc1..18301ba3ae0f 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -1267,4 +1267,28 @@ void arch_accept_memory(phys_addr_t start, phys_addr_t end);
efi_status_t efi_zboot_decompress_init(unsigned long *alloc_size);
efi_status_t efi_zboot_decompress(u8 *out, unsigned long outlen);
+#ifdef CONFIG_SECURE_LAUNCH
+efi_status_t efi_secure_launch_init(efi_handle_t image_handle);
+efi_status_t efi_secure_launch_prepare(struct boot_params *boot_params,
+ phys_addr_t base);
+void efi_secure_launch(void);
+#else
+static inline
+efi_status_t efi_secure_launch_init(efi_handle_t image_handle)
+{
+ return EFI_UNSUPPORTED;
+}
+
+static inline
+efi_status_t efi_secure_launch_prepare(struct boot_params *boot_params,
+ phys_addr_t base)
+{
+ return EFI_SUCCESS;
+}
+
+static inline void efi_secure_launch(void)
+{
+}
+#endif
+
#endif
diff --git a/drivers/firmware/efi/libstub/x86-slaunch.c b/drivers/firmware/efi/libstub/x86-slaunch.c
new file mode 100644
index 000000000000..98ff15f94996
--- /dev/null
+++ b/drivers/firmware/efi/libstub/x86-slaunch.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/efi.h>
+#include <linux/pci.h>
+#include <linux/stddef.h>
+#include <linux/slr_efi.h>
+#include <linux/slaunch.h>
+
+#include <asm/boot.h>
+#include <asm/bootparam.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+static struct efi_slaunch_protocol *slaunch;
+
+efi_status_t efi_secure_launch_init(efi_handle_t image_handle)
+{
+ return efi_bs_call(handle_protocol, image_handle,
+ &EFI_SLAUNCH_PROTOCOL_GUID, (void **)&slaunch);
+}
+
+efi_status_t efi_secure_launch_prepare(struct boot_params *boot_params,
+ phys_addr_t base)
+{
+ if (!slaunch)
+ return EFI_SUCCESS;
+
+ return slaunch->setup_dlme(slaunch, base, mle_header_offset, (u64)boot_params);
+}
+
+void efi_secure_launch(void)
+{
+ if (!slaunch)
+ return;
+
+ slaunch->launch(slaunch);
+}
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index cef32e2c82d8..339e63ae84ef 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -833,7 +833,8 @@ static efi_status_t parse_options(const char *cmdline)
}
static efi_status_t efi_decompress_kernel(unsigned long *kernel_entry,
- struct boot_params *boot_params)
+ struct boot_params *boot_params,
+ unsigned long alloc_limit)
{
unsigned long virt_addr = LOAD_PHYSICAL_ADDR;
unsigned long addr, alloc_size, entry;
@@ -877,8 +878,7 @@ static efi_status_t efi_decompress_kernel(unsigned long *kernel_entry,
status = efi_random_alloc(alloc_size, CONFIG_PHYSICAL_ALIGN, &addr,
seed[0], EFI_LOADER_CODE,
- LOAD_PHYSICAL_ADDR,
- EFI_X86_KERNEL_ALLOC_LIMIT);
+ LOAD_PHYSICAL_ADDR, alloc_limit);
if (status != EFI_SUCCESS)
return status;
@@ -890,6 +890,10 @@ static efi_status_t efi_decompress_kernel(unsigned long *kernel_entry,
*kernel_entry = addr + entry;
+ status = efi_secure_launch_prepare(boot_params, addr);
+ if (status != EFI_SUCCESS)
+ return status;
+
return efi_adjust_memory_range_protection(addr, kernel_text_size) ?:
efi_adjust_memory_range_protection(addr + kernel_inittext_offset,
kernel_inittext_size);
@@ -914,6 +918,7 @@ void __noreturn efi_stub_entry(efi_handle_t handle,
struct boot_params *boot_params)
{
+ unsigned long alloc_limit = EFI_X86_KERNEL_ALLOC_LIMIT;
efi_guid_t guid = EFI_MEMORY_ATTRIBUTE_PROTOCOL_GUID;
const struct linux_efi_initrd *initrd = NULL;
unsigned long kernel_entry;
@@ -925,6 +930,17 @@ void __noreturn efi_stub_entry(efi_handle_t handle,
if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
efi_exit(handle, EFI_INVALID_PARAMETER);
+ status = efi_secure_launch_init(handle);
+ switch (status) {
+ case EFI_SUCCESS:
+ alloc_limit = U32_MAX;
+ break;
+ case EFI_UNSUPPORTED:
+ break;
+ default:
+ efi_exit(handle, status);
+ }
+
if (!IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL) || !boot_params) {
status = efi_allocate_bootparams(handle, &boot_params);
if (status != EFI_SUCCESS)
@@ -974,7 +990,7 @@ void __noreturn efi_stub_entry(efi_handle_t handle,
if (efi_mem_encrypt > 0)
hdr->xloadflags |= XLF_MEM_ENCRYPTION;
- status = efi_decompress_kernel(&kernel_entry, boot_params);
+ status = efi_decompress_kernel(&kernel_entry, boot_params, alloc_limit);
if (status != EFI_SUCCESS) {
efi_err("Failed to decompress kernel\n");
goto fail;
@@ -1029,6 +1045,9 @@ void __noreturn efi_stub_entry(efi_handle_t handle,
goto fail;
}
+ /* If a Secure Launch is in progress, this never returns */
+ efi_secure_launch();
+
/*
* Call the SEV init code while still running with the firmware's
* GDT/IDT, so #VC exceptions will be handled by EFI.
--
2.47.3
next prev parent reply other threads:[~2026-05-15 21:16 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-15 21:13 [PATCH v16 00/38] x86: Secure Launch support for Intel TXT Ross Philipson
2026-05-15 21:13 ` [PATCH v16 01/38] tpm: Initial step to reorganize TPM public headers Ross Philipson
2026-05-15 23:03 ` Jarkko Sakkinen
2026-05-15 23:05 ` Jason Gunthorpe
2026-05-15 23:10 ` Dave Hansen
2026-05-15 23:51 ` Jarkko Sakkinen
2026-05-15 21:13 ` [PATCH v16 02/38] tpm: Move TPM1 specific definitions to the command header Ross Philipson
2026-05-15 23:14 ` Jarkko Sakkinen
2026-05-15 21:13 ` [PATCH v16 03/38] tpm: Move TPM2 " Ross Philipson
2026-05-15 23:15 ` Jarkko Sakkinen
2026-05-15 21:13 ` [PATCH v16 04/38] tpm: Move TPM common base " Ross Philipson
2026-05-15 23:22 ` Jarkko Sakkinen
2026-05-15 21:13 ` [PATCH v16 05/38] tpm: Move platform specific definitions to the new PTP header Ross Philipson
2026-05-15 21:13 ` [PATCH v16 06/38] tpm: Remove main TPM header from TPM event log header Ross Philipson
2026-05-15 21:13 ` [PATCH v16 07/38] tpm-buf: Merge TPM_BUF_BOUNDARY_ERROR and TPM_BUF_OVERFLOW Ross Philipson
2026-05-15 21:13 ` [PATCH v16 08/38] tpm-buf: Remove chip parameter from tpm_buf_append_handle() Ross Philipson
2026-05-15 21:13 ` [PATCH v16 10/38] tpm-buf: Add TPM buffer support header for standalone reuse Ross Philipson
2026-05-15 21:13 ` [PATCH v16 11/38] tpm/tpm_tis: Close all localities Ross Philipson
2026-05-15 21:13 ` [PATCH v16 12/38] tpm/tpm_tis: Address positive localities in tpm_tis_request_locality() Ross Philipson
2026-05-15 21:13 ` [PATCH v16 13/38] tpm/tpm_tis: Allow locality to be set to a different value Ross Philipson
2026-05-15 21:13 ` [PATCH v16 14/38] tpm/sysfs: Show locality used by kernel Ross Philipson
2026-05-15 21:13 ` [PATCH v16 15/38] Documentation/security: Secure Launch kernel documentation Ross Philipson
2026-05-15 22:02 ` Randy Dunlap
2026-05-15 21:13 ` [PATCH v16 16/38] x86: Secure Launch Kconfig Ross Philipson
2026-05-15 21:13 ` [PATCH v16 17/38] x86: Secure Launch Resource Table header file Ross Philipson
2026-05-15 21:13 ` [PATCH v16 18/38] x86/efi: Secure Launch Resource Table EFI definitions " Ross Philipson
2026-05-15 21:13 ` [PATCH v16 19/38] x86: Secure Launch main " Ross Philipson
2026-05-15 21:13 ` [PATCH v16 20/38] x86/txt: Intel Trusted eXecution Technology (TXT) definitions Ross Philipson
2026-05-15 21:13 ` [PATCH v16 21/38] lib/crypto: Add SHA1 support for pre-boot environments Ross Philipson
2026-05-15 21:13 ` [PATCH v16 22/38] lib/crypto: Add SHA512 " Ross Philipson
2026-05-15 21:13 ` [PATCH v16 23/38] x86: Allow WARN_trap() macro to be included in " Ross Philipson
2026-05-15 21:13 ` [PATCH v16 24/38] x86/msr: Add variable MTRR base/mask and x2apic ID registers Ross Philipson
2026-05-15 21:13 ` [PATCH v16 25/38] x86/boot: Slight refactor of the 5 level paging logic Ross Philipson
2026-05-15 21:13 ` [PATCH v16 26/38] x86: Add early SHA-1 support for Secure Launch early measurements Ross Philipson
2026-05-15 21:13 ` [PATCH v16 27/38] x86: Add early SHA-256 " Ross Philipson
2026-05-15 21:14 ` [PATCH v16 28/38] x86: Add early SHA-384/512 " Ross Philipson
2026-05-15 21:14 ` [PATCH v16 29/38] x86/tpm: Early startup TPM PCR extending driver Ross Philipson
2026-05-15 22:32 ` Dave Hansen
2026-05-15 21:14 ` [PATCH v16 30/38] x86/slaunch: Add MLE header and Secure Launch entrypoint to the core kernel Ross Philipson
2026-05-15 21:14 ` [PATCH v16 31/38] x86/slaunch: Secure Launch kernel early boot initialization Ross Philipson
2026-05-15 21:14 ` [PATCH v16 32/38] x86/slaunch: Secure Launch kernel late " Ross Philipson
2026-05-15 21:14 ` [PATCH v16 33/38] x86/slaunch: Secure Launch SMP bringup support Ross Philipson
2026-05-15 21:14 ` [PATCH v16 34/38] kexec/slaunch: Secure Launch kexec SEXIT support Ross Philipson
2026-05-15 21:14 ` [PATCH v16 35/38] reboot/slaunch: Secure Launch SEXIT support on reboot paths Ross Philipson
2026-05-15 21:14 ` [PATCH v16 36/38] x86/slaunch: Secure Launch late initcall platform module Ross Philipson
2026-05-15 21:14 ` Ross Philipson [this message]
2026-05-15 21:14 ` [PATCH v16 38/38] x86/boot: Legacy boot DRTM support for Secure Launch Ross Philipson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515211410.31440-38-ross.philipson@gmail.com \
--to=ross.philipson@gmail.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=andrew.cooper3@citrix.com \
--cc=ardb@kernel.org \
--cc=baolu.lu@linux.intel.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=daniel.kiper@oracle.com \
--cc=dave.hansen@linux.intel.com \
--cc=davem@davemloft.net \
--cc=dpsmith@apertussolutions.com \
--cc=dwmw2@infradead.org \
--cc=ebiederm@xmission.com \
--cc=herbert@gondor.apana.org.au \
--cc=hpa@zytor.com \
--cc=iommu@lists.linux.dev \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kanth.ghatraju@oracle.com \
--cc=kexec@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@redhat.com \
--cc=mjg59@srcf.ucam.org \
--cc=nivedita@alum.mit.edu \
--cc=peterhuewe@gmx.de \
--cc=tglx@linutronix.de \
--cc=trenchboot-devel@googlegroups.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox