Kexec Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Berger <stefanb@linux.ibm.com>
To: Tushar Sugandhi <tusharsu@linux.microsoft.com>,
	zohar@linux.ibm.com, ebiederm@xmission.com, noodles@fb.com,
	bauermann@kolabnow.com, kexec@lists.infradead.org,
	linux-integrity@vger.kernel.org
Cc: code@tyhicks.com, nramas@linux.microsoft.com, paul@paul-moore.com
Subject: Re: [PATCH v2 7/7] ima: record log size at kexec load and execute
Date: Thu, 12 Oct 2023 20:27:48 -0400	[thread overview]
Message-ID: <50477765-05f3-9fc6-4e85-cd822d212d95@linux.ibm.com> (raw)
In-Reply-To: <20231005182602.634615-8-tusharsu@linux.microsoft.com>


On 10/5/23 14:26, Tushar Sugandhi wrote:
> The window between kexec 'load' and 'execute' could be arbitrarily long.
> Even with the large chunk of memory allocated at kexec 'load', it may
> run out which would result in missing events in IMA log after the system
> soft reboots to the new Kernel.  This would result in IMA measurements
> getting out of sync with the TPM PCR quotes which would result in remote
> attestation failing for that system.  There is currently no way for the
> new Kernel to know if the IMA log TPM PCR quote out of sync problem is
> because of the missing measurements during kexec.
>
> Define two new IMA events, 'kexec_load' and 'kexec_execute', to be
> measured at kexec 'load' and 'execute' respectively.
>
> IMA measures 'boot_aggregate' as the first event when the system boots -
> either cold boot or kexec soft boot.  In case when the system goes
> through multiple soft reboots, the number of 'boot_aggregate' events in
> IMA log corresponds to total number of boots (cold boot plus multiple
> kexec soft reboots).  With this change, there would be additional
> 'kexec_load' and 'kexec_execute' events in between the two
> 'boot_aggregate' events.  In rare cases, when the system runs out of
> memory during kexec soft reboot, 'kexec_execute' won't be copied since
> its one of the very last event measured just before kexec soft reboot.
> The absence of the event 'kexec_execute' in between the two
> boot_aggregate' events would signal the attestation service that the IMA
> log on the system is out of sync with TPM PCR quotes and the system needs
> to be cold booted for the remote attestation to succeed again.
>
>
> @@ -198,6 +208,7 @@ void ima_add_kexec_buffer(struct kimage *image)
>   static int ima_update_kexec_buffer(struct notifier_block *self,
>   				   unsigned long action, void *data)
>   {
> +	char ima_kexec_event[IMA_KEXEC_EVENT_LEN];
>   	void *buf = NULL;
>   	size_t buf_size;
>   	bool resume = false;
> @@ -213,9 +224,31 @@ static int ima_update_kexec_buffer(struct notifier_block *self,
>   		return NOTIFY_OK;
>   	}
>   
> +	buf_size = ima_get_binary_runtime_size();
> +	scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN,
> +		  "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;",
> +		  kexec_segment_size, buf_size);
> +
> +	/*
> +	 * This is one of the very last events measured by IMA before kexec
> +	 * soft rebooting into the new Kernal.
> +	 * This event can be used as a marker after the system soft reboots
> +	 * to the new Kernel to check if there was sufficient memory allocated
> +	 * at kexec 'load' to capture the events measured between the window
> +	 * of kexec 'load' and 'execute'.
> +	 * This event needs to be present in the IMA log, in between the two
> +	 * 'boot_aggregate' events that are logged for the previous boot and
> +	 * the current soft reboot. If it is not present after the system soft
> +	 * reboots into the new Kernel, it would mean the IMA log is not
> +	 * consistent with the TPM PCR quotes, and the system needs to be
> +	 * cold-booted for the attestation to succeed again.
> +	 */
> +	ima_measure_critical_data("ima_kexec", "kexec_execute",
> +				  ima_kexec_event, strlen(ima_kexec_event),
> +				  false, NULL, 0);
> +
>   	ima_measurements_suspend();
>   
> -	buf_size = ima_get_binary_runtime_size();

This should be removed earlier, in 2/7.



>   	ret = ima_dump_measurement_list(&buf_size, &buf,
>   					kexec_segment_size);
>   

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  reply	other threads:[~2023-10-13  0:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-05 18:25 [PATCH v2 0/7] ima: kexec: measure events between kexec load and execute Tushar Sugandhi
2023-10-05 18:25 ` [PATCH v2 1/7] ima: refactor ima_dump_measurement_list to move memory allocation to a separate function Tushar Sugandhi
2023-10-13  0:28   ` Stefan Berger
2023-10-20 20:33     ` Tushar Sugandhi
2023-10-20 21:21       ` Stefan Berger
2023-10-20 21:50         ` Tushar Sugandhi
2023-10-26 20:16   ` Mimi Zohar
2023-10-27  3:25     ` Mimi Zohar
2023-11-14 22:32       ` Tushar Sugandhi
2023-11-14 22:31     ` Tushar Sugandhi
2023-10-05 18:25 ` [PATCH v2 2/7] ima: move ima_dump_measurement_list call from kexec load to execute Tushar Sugandhi
2023-10-13  0:28   ` Stefan Berger
2023-10-20 20:35     ` Tushar Sugandhi
     [not found]   ` <989af3e9a8621f57643b67b717d9a39fdb2ffe24.camel@linux.ibm.com>
2023-11-14 22:43     ` Tushar Sugandhi
2023-11-15 22:30       ` Tushar Sugandhi
2023-10-05 18:25 ` [PATCH v2 3/7] ima: kexec: map source pages containing IMA buffer to image post kexec load Tushar Sugandhi
2023-10-13  0:29   ` Stefan Berger
2023-10-20 20:36     ` Tushar Sugandhi
2023-10-05 18:25 ` [PATCH v2 4/7] kexec: update kexec_file_load syscall to call ima_kexec_post_load Tushar Sugandhi
2023-10-05 18:26 ` [PATCH v2 5/7] ima: suspend measurements while the buffer is being copied during kexec reboot Tushar Sugandhi
2023-10-05 18:26 ` [PATCH v2 6/7] ima: make the memory for events between kexec load and exec configurable Tushar Sugandhi
2023-10-13  0:27   ` Stefan Berger
2023-10-20 20:39     ` Tushar Sugandhi
2023-10-20 21:16       ` Stefan Berger
2023-10-20 21:53         ` Tushar Sugandhi
2023-10-05 18:26 ` [PATCH v2 7/7] ima: record log size at kexec load and execute Tushar Sugandhi
2023-10-13  0:27   ` Stefan Berger [this message]
2023-10-20 20:40     ` Tushar Sugandhi
     [not found]   ` <2b95e8b9ebe10a24c7cb6fc90cb2d1342a157ed5.camel@linux.ibm.com>
2023-11-14 22:48     ` Tushar Sugandhi
     [not found] ` <8f87e7e4fe5c5a24cdc0d3e2267eeaf00825d1bb.camel@linux.ibm.com>
2023-10-27 19:51   ` [PATCH v2 0/7] ima: kexec: measure events between " Mimi Zohar
2023-11-15 19:21     ` Tushar Sugandhi
2023-11-14 23:24   ` Tushar Sugandhi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50477765-05f3-9fc6-4e85-cd822d212d95@linux.ibm.com \
    --to=stefanb@linux.ibm.com \
    --cc=bauermann@kolabnow.com \
    --cc=code@tyhicks.com \
    --cc=ebiederm@xmission.com \
    --cc=kexec@lists.infradead.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=noodles@fb.com \
    --cc=nramas@linux.microsoft.com \
    --cc=paul@paul-moore.com \
    --cc=tusharsu@linux.microsoft.com \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox