From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
kvm@vger.kernel.org
Cc: James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Oliver Upton <oliver.upton@linux.dev>,
Zenghui Yu <yuzenghui@huawei.com>,
Joey Gouly <joey.gouly@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Mark Brown <broonie@kernel.org>
Subject: [PATCH v2 16/16] KVM: arm64: Rely on visibility to let PIR*_ELx/TCR2_ELx UNDEF
Date: Tue, 3 Sep 2024 16:38:34 +0100 [thread overview]
Message-ID: <20240903153834.1909472-17-maz@kernel.org> (raw)
In-Reply-To: <20240903153834.1909472-1-maz@kernel.org>
With a visibility defined for these registers, there is no need
to check again for S1PIE or TCRX being implemented as perform_access()
already handles it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/kvm/sys_regs.c | 36 +++---------------------------------
1 file changed, 3 insertions(+), 33 deletions(-)
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index bcc7c4c6620f..2783c1d2a13a 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -346,18 +346,6 @@ static bool access_rw(struct kvm_vcpu *vcpu,
return true;
}
-static bool check_s1pie_access_rw(struct kvm_vcpu *vcpu,
- struct sys_reg_params *p,
- const struct sys_reg_desc *r)
-{
- if (!kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, S1PIE, IMP)) {
- kvm_inject_undefined(vcpu);
- return false;
- }
-
- return access_rw(vcpu, p, r);
-}
-
/*
* See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
*/
@@ -424,12 +412,6 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
bool was_enabled = vcpu_has_cache_enabled(vcpu);
u64 val, mask, shift;
- if (reg_to_encoding(r) == SYS_TCR2_EL1 &&
- !kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, TCRX, IMP)) {
- kvm_inject_undefined(vcpu);
- return false;
- }
-
BUG_ON(!p->is_write);
get_access_mask(r, &mask, &shift);
@@ -448,18 +430,6 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
return true;
}
-static bool access_tcr2_el2(struct kvm_vcpu *vcpu,
- struct sys_reg_params *p,
- const struct sys_reg_desc *r)
-{
- if (!kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, TCRX, IMP)) {
- kvm_inject_undefined(vcpu);
- return false;
- }
-
- return access_rw(vcpu, p, r);
-}
-
static bool access_actlr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
@@ -2865,7 +2835,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
EL2_REG(TTBR0_EL2, access_rw, reset_val, 0),
EL2_REG(TTBR1_EL2, access_rw, reset_val, 0),
EL2_REG(TCR_EL2, access_rw, reset_val, TCR_EL2_RES1),
- EL2_REG_FILTERED(TCR2_EL2, access_tcr2_el2, reset_val, TCR2_EL2_RES1,
+ EL2_REG_FILTERED(TCR2_EL2, access_rw, reset_val, TCR2_EL2_RES1,
tcr2_el2_visibility),
EL2_REG_VNCR(VTTBR_EL2, reset_val, 0),
EL2_REG_VNCR(VTCR_EL2, reset_val, 0),
@@ -2898,9 +2868,9 @@ static const struct sys_reg_desc sys_reg_descs[] = {
EL2_REG(HPFAR_EL2, access_rw, reset_val, 0),
EL2_REG(MAIR_EL2, access_rw, reset_val, 0),
- EL2_REG_FILTERED(PIRE0_EL2, check_s1pie_access_rw, reset_val, 0,
+ EL2_REG_FILTERED(PIRE0_EL2, access_rw, reset_val, 0,
s1pie_el2_visibility),
- EL2_REG_FILTERED(PIR_EL2, check_s1pie_access_rw, reset_val, 0,
+ EL2_REG_FILTERED(PIR_EL2, access_rw, reset_val, 0,
s1pie_el2_visibility),
EL2_REG(AMAIR_EL2, access_rw, reset_val, 0),
--
2.39.2
next prev parent reply other threads:[~2024-09-03 15:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-03 15:38 [PATCH v2 00/16] KVM: arm64: Add EL2 support to FEAT_S1PIE Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 01/16] KVM: arm64: nv: Handle CNTHCTL_EL2 specially Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 02/16] KVM: arm64: nv: Save/Restore vEL2 sysregs Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 03/16] KVM: arm64: Add TCR2_EL2 to the sysreg arrays Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 04/16] KVM: arm64: Add save/restore for TCR2_EL2 Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 05/16] arm64: Add encoding for PIRE0_EL2 Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 06/16] arm64: Remove VNCR definition " Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 07/16] KVM: arm64: Add PIR{,E0}_EL2 to the sysreg arrays Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 08/16] KVM: arm64: Add save/restore for PIR{,E0}_EL2 Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 09/16] KVM: arm64: Handle PIR{,E0}_EL2 traps Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 10/16] KVM: arm64: Sanitise ID_AA64MMFR3_EL1 Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 11/16] KVM: arm64: Split S1 permission evaluation into direct and hierarchical parts Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 12/16] KVM: arm64: Implement AT S1PIE support Marc Zyngier
2024-09-05 13:58 ` Joey Gouly
2024-09-05 14:57 ` Marc Zyngier
2024-09-05 15:37 ` Joey Gouly
2024-09-06 7:04 ` Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 13/16] KVM: arm64: Define helper for EL2 registers with custom visibility Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 14/16] KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests Marc Zyngier
2024-09-03 15:38 ` [PATCH v2 15/16] KVM: arm64: Hide S1PIE registers " Marc Zyngier
2024-09-03 15:38 ` Marc Zyngier [this message]
2024-09-03 15:58 ` [PATCH v2 16/16] KVM: arm64: Rely on visibility to let PIR*_ELx/TCR2_ELx UNDEF Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240903153834.1909472-17-maz@kernel.org \
--to=maz@kernel.org \
--cc=alexandru.elisei@arm.com \
--cc=broonie@kernel.org \
--cc=james.morse@arm.com \
--cc=joey.gouly@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=oliver.upton@linux.dev \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox