* [LARTC] BURST and CBURTS on HTB.init 8.3
@ 2002-05-23 14:45 Alexandre M. Mello
2002-05-23 15:24 ` Martin Devera
0 siblings, 1 reply; 2+ messages in thread
From: Alexandre M. Mello @ 2002-05-23 14:45 UTC (permalink / raw)
To: lartc
[-- Attachment #1: Type: text/plain, Size: 177 bytes --]
why the exemple in the htb.init of the BURST e CBURST comes with values if the dafault is computed?
Is it better to put these values manualy?
How can I calculate the values?
[-- Attachment #2: Type: text/html, Size: 626 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] BURST and CBURTS on HTB.init 8.3
2002-05-23 14:45 [LARTC] BURST and CBURTS on HTB.init 8.3 Alexandre M. Mello
@ 2002-05-23 15:24 ` Martin Devera
0 siblings, 0 replies; 2+ messages in thread
From: Martin Devera @ 2002-05-23 15:24 UTC (permalink / raw)
To: lartc
in typical scenarios you can use default values. Higher
one will result in higher burstiness but also to slightly
faster computation (for >1Gbit links :).
It is here probably becaus older htb didn't compute defaults.
devik
On Thu, 23 May 2002, Alexandre M. Mello wrote:
> why the exemple in the htb.init of the BURST e CBURST comes with values if the dafault is computed?
> Is it better to put these values manualy?
> How can I calculate the values?
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-05-23 15:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-05-23 14:45 [LARTC] BURST and CBURTS on HTB.init 8.3 Alexandre M. Mello
2002-05-23 15:24 ` Martin Devera
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox