* [LARTC] Multiple interfaces thru one qdisc
@ 2001-05-31 12:36 Ethy H. Brito
0 siblings, 0 replies; 2+ messages in thread
From: Ethy H. Brito @ 2001-05-31 12:36 UTC (permalink / raw)
To: lartc
Gurus
I am facing a problem controling bandwidth of a bunch of ppp leased lines.
I need to direct some ppp interfaces thru one queue for input
and other for output traffic.
I could not figure how to do it since queues are "bonded" to one "dev"
interface at "tc" command.
Is it possible to do? What could be the command syntax?
I used to do it with source routing and Alan Cox shaper's in kernel 2.0. Now
I am confused with lots of parameters and few documentation. FYI I read Linux
Adv Routing2.4 version 0.3.0.
Environment: Slackware-Current Linux w/kernel 2.4.4
Thanx a lot
Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
+(12) 341-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
Sao Jose dos Campos / \
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] Multiple interfaces thru one qdisc
@ 2001-06-01 12:48 Federico Montesino Pouzols
0 siblings, 0 replies; 2+ messages in thread
From: Federico Montesino Pouzols @ 2001-06-01 12:48 UTC (permalink / raw)
To: lartc
On Fri, Jun 01, 2001 at 09:42:04AM -0300, Ethy H. Brito wrote:
> On Fri, 1 Jun 2001, MONTESINO POUZOLS FEDERICO wrote:
>
> >
> > I am not sure, but, perhaps, the teql discipline may be a
> > solution. With teql you could make a new interface (teql0 or something
> > like that) consisting of the two ppps. Look at the HOWTO, there are some
> > examples of teql, search also through this list archive.
>
> If teql behaves as explained in Linux2.4 Adv HOWTO it is a round-robin
> device. It would do what I need if all ppp lines go to the same client which
> is not the case. Could you confirm that it is a simple RR device?
As far as I know (I have read about it, but not tested) it _is_
Round-Robin.
I think that, perhaps, you can impose the queue discipline on
tql0 (that masters both ppps), and then set different routes using
ppp0 and ppp1. I wonder if the teql qdisc will shape the ppp0 and
ppp1 sending rate. I doubt it.
Please, if there is anybody who knows teql well, confirm this
point. Maybe this behaviour can be changed.
>
> Ethy H. Brito /"\
> InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
> +(12) 341-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
> Sao Jose dos Campos / \
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-06-01 12:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-06-01 12:48 [LARTC] Multiple interfaces thru one qdisc Federico Montesino Pouzols
-- strict thread matches above, loose matches on Subject: below --
2001-05-31 12:36 Ethy H. Brito
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox