From: Miguel Bolanos <mike@hsol.net>
To: Tommy McCabe <rocketjet314@yahoo.com>
Cc: linux-8086@vger.kernel.org
Subject: Re: Another patch
Date: Tue, 27 Jul 2004 07:54:25 -0600 [thread overview]
Message-ID: <1090936265.3099.0.camel@talena> (raw)
In-Reply-To: <20040712214111.88684.qmail@web51307.mail.yahoo.com>
Greetings,
On Mon, 2004-07-12 at 15:41, Tommy McCabe wrote:
> This patch:
>
> 1. Has eight partitions per hard disk instead of 64,
> to save indoes and not flood the disk images. This
> time I didn't change the commented-out stuff like the
> secondary IDE channel.
I would like to hear out some votes about this before actually applying
it.. in my personal opinion it should go, but perhaps anyone have a
different opinion? (Allan? Harry? Claudio? ... ?)
>
> 2. Remove the Conrad Parallel Port Radio Clock (which
> I think is some sort of easter egg) from MAKEDEV.
>
sort of an easter egg... interesting definition.
Honestly i can't just a feature with that justification.
> 3. Fixed the "make clean" process.
>
Applied the rootfs_template.tar fix.
> 4. Got rid of the sudos in the Makefile.
>
Definitly applied, BUT.. keeping the mount commands.
> 5. Got rid of the ridiculous business with a ROOTDIR
> that didn't exist and commands that weren't referenced
> anywhere in the Makefile.
>
NOT applied.
best wishes
Mike
>
>
> __________________________________
> Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
> http://promotions.yahoo.com/new_mail
>
> ______________________________________________________________________
> diff -ruN ./elkscomp/elkscmd/Make.rules ./elkscurr/elkscmd/Make.rules
> --- ./elkscomp/elkscmd/Make.rules 2002-05-29 14:23:03.000000000 -0400
> +++ ./elkscurr/elkscmd/Make.rules 2004-07-12 17:22:55.000000000 -0400
> @@ -68,8 +68,6 @@
> #
> # Directory to create the target tree in.
>
> -ROOTDIR=$(BASEDIR)/RootFS
> -
> ###############################################################################
> #
> # Command to copy the tree across.
> diff -ruN ./elkscomp/elkscmd/Makefile ./elkscurr/elkscmd/Makefile
> --- ./elkscomp/elkscmd/Makefile 2004-06-09 12:25:40.000000000 -0400
> +++ ./elkscurr/elkscmd/Makefile 2004-07-12 17:27:44.000000000 -0400
> @@ -46,12 +46,7 @@
> $(FULL3_TARGET_FS) $(FULL5_TARGET_FS) || true
> rm -f $(COMB_TARGET_FS) $(ROOT_TARGET_FS) $(ROOT_NET_TARGET_FS) \
> $(FULL3_TARGET_FS) $(FULL5_TARGET_FS) boot images.zip core
> - rm -rf rootfs_template $(ROOTDIR)
> @for i in $(DIRS); do make -C $$i clean ; done
> - -echo FIXME: make clean is temporarily broken, because there is no
> - -echo rootfs_template.tar anymore
> - tar xf rootfs_template.tar
> -
> ###############################################################################
> #
> # Include standard packaging commands.
> @@ -84,30 +79,6 @@
>
> ###############################################################################
> #
> -# Create standard packages.
> -
> -basepkg:
> - rm -fr $(ROOTDIR)
> - mkdir $(ROOTDIR)
> - make mkbase
> -
> -netpkg:
> - rm -fr $(ROOTDIR)
> - mkdir $(ROOTDIR)
> - make mknet
> -
> -stdpkg:
> - rm -fr $(ROOTDIR)
> - mkdir $(ROOTDIR)
> - make mkstd
> -
> -maxpkg:
> - rm -fr $(ROOTDIR)
> - mkdir $(ROOTDIR)
> - make mkmax
> -
> -###############################################################################
> -#
> # Create relevant parts of ELKS package.
>
> $(ELKS_DIR)/.config:
> @@ -154,42 +125,36 @@
>
> mount_combfs: $(COMB_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
> $(MKFS) $(MKFS_OPTS) $(COMB_TARGET_FS) $(COMB_TARGET_BLKS)
> - sudo -u root mount $(COMB_TARGET_FS) $(TARGET_MNT) $(LOOP)
> (cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
> (cd $(TARGET_MNT) ; tar xpvf -)
> (cd $(TARGET_MNT)/dev ; ./MAKEDEV)
>
> mount_full3fs: $(FULL3_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
> $(MKFS) $(MKFS_OPTS) $(FULL3_TARGET_FS) $(FULL3_TARGET_BLKS)
> - sudo -u root mount $(FULL3_TARGET_FS) $(TARGET_MNT) $(LOOP)
> (cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
> (cd $(TARGET_MNT) ; tar xpvf -)
> (cd $(TARGET_MNT)/dev ; ./MAKEDEV)
>
> mount_full5fs: $(FULL5_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
> $(MKFS) $(MKFS_OPTS) $(FULL5_TARGET_FS) $(FULL5_TARGET_BLKS)
> - sudo -u root mount $(FULL5_TARGET_FS) $(TARGET_MNT) $(LOOP)
> (cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
> (cd $(TARGET_MNT) ; tar xpvf -)
> (cd $(TARGET_MNT)/dev ; ./MAKEDEV)
>
> mount_rootfs: $(ROOT_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
> $(MKFS) $(MKFS_OPTS) $(ROOT_TARGET_FS) $(ROOT_TARGET_BLKS)
> - sudo -u root mount $(ROOT_TARGET_FS) $(TARGET_MNT) $(LOOP)
> (cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
> (cd $(TARGET_MNT) ; tar xpvf -)
> (cd $(TARGET_MNT)/dev ; ./MAKEDEV)
>
> mount_rootnetfs: $(ROOT_NET_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
> $(MKFS) $(MKFS_OPTS) $(ROOT_NET_TARGET_FS) $(ROOT_NET_TARGET_BLKS)
> - sudo -u root mount $(ROOT_NET_TARGET_FS) $(TARGET_MNT) $(LOOP)
> (cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
> (cd $(TARGET_MNT) ; tar xpvf -)
> (cd $(TARGET_MNT)/dev ; ./MAKEDEV)
>
> mount_sibofs: $(SIBO_TARGET_FS) $(ELKSCMD_DIR)/rootfs_template/etc/issue
> $(MKFS) $(MKFS_OPTS) $(SIBO_TARGET_FS) $(SIBO_TARGET_BLKS)
> - sudo -u root mount $(SIBO_TARGET_FS) $(TARGET_MNT) $(LOOP)
> (cd $(ELKSCMD_DIR)/rootfs_template ; tar cf - --exclude CVS *) | \
> (cd $(TARGET_MNT) ; tar xpvf -)
> (cd $(TARGET_MNT) ; rm -rf home boot root var)
> diff -ruN ./elkscomp/elkscmd/rootfs_template/dev/MAKEDEV ./elkscurr/elkscmd/rootfs_template/dev/MAKEDEV
> --- ./elkscomp/elkscmd/rootfs_template/dev/MAKEDEV 2004-06-03 23:07:55.000000000 -0400
> +++ ./elkscurr/elkscmd/rootfs_template/dev/MAKEDEV 2004-07-12 17:33:09.000000000 -0400
> @@ -97,8 +97,8 @@
> ##############################################################################
> # Direct IDE disks, Primary channel.
>
> - $MKSET 0 63 $MKDEV hda b 5 # Currently.
> - $MKSET 64 63 $MKDEV hdb b 5 # Currently.
> + $MKSET 0 7 $MKDEV hda b 5 # Currently.
> + $MKSET 8 7 $MKDEV hdb b 5 # Currently.
>
> # $MKSET 0 63 $MKDEV hda b 3 # Ought to be.
> # $MKSET 64 63 $MKDEV hdb b 3 # Ought to be.
> @@ -189,10 +189,10 @@
> ##############################################################################
> # BIOS hard disks.
>
> - $MKSET 0 63 $MKDEV bda b 3 # Currently
> - $MKSET 64 63 $MKDEV bdb b 3 # Currently
> - $MKSET 128 63 $MKDEV bdc b 3 # Currently
> - $MKSET 192 63 $MKDEV bdd b 3 # Currently
> + $MKSET 0 7 $MKDEV bda b 3 # Currently
> + $MKSET 8 7 $MKDEV bdb b 3 # Currently
> + $MKSET 16 7 $MKDEV bdc b 3 # Currently
> + $MKSET 24 7 $MKDEV bdd b 3 # Currently
>
> # $MKSET 0 63 $MKDEV bda b 14 # Ought to be
> # $MKSET 64 63 $MKDEV bdb b 14 # Ought to be
> @@ -256,9 +256,4 @@
> # $MKSET 0 7 $MKDEV i2c c 89
>
> ##############################################################################
> -# Conrad Electronic Parallel Port Radio Clocks. These are not yet supported.
> -
> -# $MKSET 0 1 $MKDEV pcfclock c 181
> -
> -##############################################################################
> # EOF.
next prev parent reply other threads:[~2004-07-27 13:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-12 21:41 Another patch Tommy McCabe
2004-07-27 13:54 ` Miguel Bolanos [this message]
2004-07-27 15:15 ` Eduardo Pereira Habkost
2004-07-27 16:09 ` Tommy McCabe
[not found] <40F3C561.2080704@xs4all.nl>
2004-07-13 12:06 ` Tommy McCabe
2004-07-27 13:54 ` Miguel Bolanos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1090936265.3099.0.camel@talena \
--to=mike@hsol.net \
--cc=linux-8086@vger.kernel.org \
--cc=rocketjet314@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox