* boot problem
[not found] <Pine.LNX.4.21.0201250656230.1598-100000@Consulate.UFP.CX>
@ 2002-04-10 22:33 ` Dan Olson
0 siblings, 0 replies; only message in thread
From: Dan Olson @ 2002-04-10 22:33 UTC (permalink / raw)
To: linux-8086
This is still sketchy, but I thought I'd throw it out there anyway. I
finally got my SCSI card up and running last night and installed in my IBM
XT. I was able to boot MS DOS, run fdisk and format on the drive. I then
booted using my ELKS disk that I had made a while back, and notice that it
does detect the hard drive, but unfortunatly somewhere along the line it
dies and doesn't complete booting. I know I need to test some more things
before I know exactly what's going on here, but I know I was able to boot
off of this disk before using a floppy only system, has anyone else run
into trouble booting a machine with a hard drive or SCSI controller??
I should have more time tonight to trouble shoot, just thought I'd see if
anyone had seen anything like this!
Dan
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-04-10 22:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <Pine.LNX.4.21.0201250656230.1598-100000@Consulate.UFP.CX>
2002-04-10 22:33 ` boot problem Dan Olson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox