From: Javier Sedano <jsedano@dit.upm.es>
To: Neil Holmes <neil.holmes@zoom.co.uk>
Cc: Linux 8086 <linux-8086@vger.kernel.org>
Subject: Re: Elks Distribution
Date: Fri, 24 May 2002 16:16:27 +0200 [thread overview]
Message-ID: <3CEE4B39.3223FB2A@dit.upm.es> (raw)
In-Reply-To: DDENIOHFNLNMCGGDFDPCOEMDCDAA.neil.holmes@zoom.co.uk
Neil Holmes wrote:
>
> Are there any fixes around for this that I may be missing ?
>
There has been a discussion about it in the last days, so I suppose
they are working on it.
>
> I have now moved onto looking for some sort of a challenge for myself that I
> may be able to contribute to the project. My C skills are not to the
> standard of the majority of the contributors here. Hence I am not so
> comfortable at low levels. I noticed, though, in the documentation that
> Question 1.3 says "Are there any ready-to-run distributions of ELKS". The
> answer says no and goes on to invite interest to build something. Is this
> still the case ? Are there no distributions ?
>
As far as I know, nobody is working on it, so your work will be
appreciated.
> During the course of my experimenting I have been playing with scripts that
> install ELKS to the hard drive from a root and boot floppy. I guess this is
> the start of a distribution ? My current script will only run, so far, into
> /dev/bda1. It was devised as a way to save me some time really.
>
On my side, it is a danger, since I have MSDOS-win30 in bda1 and Minix
in bda2, so I need to change to bda3
> I am currently trying to persuade my script to setup the hard drive to boot.
> I did it manually so I expect I will soon have it working from my install
> routine too. In due course I may well re-write the script in, perhaps C ?
I wouldn't do so. Scripts are slower, and sometimes larger, but much
easier to modify (just mount the floppy under UNIX/Linux and edit it). I
would advice scripts, if I were asked.
> I
> would also like to make the Install Floppy Disk be for a 0.1.0 system but
> the problems that I outlined at the head of this message prevent that just
> now.
>
One hint: keep two distribution. A stable, with that you know that
(almost) works. And publish it in the web page. And keep working on
other, published here (and as alpha/beta in the web, if you want), until
it reaches stable state.
> Is what I have been up to of interest. Maybe good for less technical people
> who want a first look at Elks ?
>
I think so.
--
El trabajo en equipo es esencial, te permite echarle la culpa a otro.
--------
Javier Sedano Jarillo http://www.it.uc3m.es/~jsedano
jsedano@dit.upm.es (*)
jsedano@ieee.org
next prev parent reply other threads:[~2002-05-24 14:16 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-24 13:17 Elks Distribution Neil Holmes
2002-05-24 14:16 ` Javier Sedano [this message]
[not found] <200205242123.WAA08977@eddie.loc>
2002-05-25 20:52 ` Neil Holmes
2002-05-25 22:39 ` Stefan de Konink
2002-05-25 22:55 ` Riley Williams
2002-05-26 6:26 ` Neil Holmes
2002-05-26 8:00 ` Riley Williams
2002-05-26 8:07 ` Neil Holmes
2002-05-26 9:50 ` Riley Williams
2002-05-26 15:27 ` Riley Williams
2002-05-26 12:52 ` pauln
-- strict thread matches above, loose matches on Subject: below --
2002-05-25 21:48 Neil Holmes
2002-05-25 23:22 ` Stefan de Konink
2002-05-26 13:30 ` Nicholas Knight
2002-05-25 23:31 ` Stefan de Konink
2002-05-25 22:06 ` Neil Holmes
2002-05-25 23:41 ` Stefan de Konink
2002-05-25 22:15 ` Neil Holmes
2002-05-25 23:47 ` Stefan de Konink
2002-05-25 22:22 ` Neil Holmes
2002-05-25 23:51 ` Stefan de Konink
2002-05-27 16:59 ` Dan Olson
2002-05-26 14:37 ` Blaz Antonic
2002-05-26 6:45 ` Neil Holmes
2002-05-26 15:01 ` Blaz Antonic
2002-05-27 12:30 ` Javier Sedano
[not found] ` <3CF33E41.6ED906FB@ascend.com>
2002-05-28 15:46 ` Javier Sedano
2002-05-28 16:30 ` Pascal Bellard
2002-05-27 12:22 Re : " Javier Sedano
2002-05-27 18:52 ` Riley Williams
2002-05-27 20:23 ` Stefan de Konink
2002-05-28 6:11 ` Riley Williams
2002-05-27 13:46 Neil Holmes
2002-05-27 20:34 ` Michael McConnell
2002-05-28 5:33 ` Neil Holmes
2002-05-28 6:46 ` Michael McConnell
2002-05-28 6:57 ` Neil Holmes
2002-05-28 6:59 ` Neil Holmes
2002-05-28 5:29 Neil Holmes
2002-05-28 6:27 ` Riley Williams
2002-05-28 7:14 ` Neil Holmes
2002-05-28 11:12 ` Stefan de Konink
2002-05-28 9:53 ` Neil Holmes
2002-05-28 11:39 ` Alan Cox
2002-05-28 10:51 ` Neil Holmes
2002-05-28 12:01 ` Alan Cox
2002-05-28 11:03 ` Neil Holmes
2002-05-28 15:35 ` Javier Sedano
2002-05-29 8:57 ` Pascal Bellard
2002-05-29 10:17 ` Javier Sedano
2002-05-28 23:11 ` Riley Williams
2002-05-28 23:35 ` Dan Olson
2002-05-29 6:26 ` neil.holmes
2002-05-29 10:33 ` Javier Sedano
2002-05-29 18:31 ` Riley Williams
2002-05-29 23:44 ` Dan Olson
2002-05-30 7:51 ` Stefan de Konink
2002-05-30 13:01 ` Harry Kalogirou
2002-05-30 9:38 ` Javier Sedano
2002-05-29 6:31 ` neil.holmes
2002-05-28 5:30 Neil Holmes
2002-05-28 5:30 Neil Holmes
[not found] <Pine.LNX.4.21.0205280728170.15697-100000@Consulate.UFP.CX>
2002-05-28 15:13 ` Javier Sedano
2002-05-28 17:44 Neil Holmes
2002-05-28 21:01 Neil Holmes
2002-05-28 22:47 ` Stefan de Konink
2002-05-29 6:40 ` neil.holmes
2002-05-30 11:40 ` Stefan de Konink
2002-05-30 11:03 ` Riley Williams
2002-05-30 19:38 ` Stefan de Konink
2002-05-30 18:47 ` Riley Williams
2002-05-30 19:35 ` neil.holmes
2002-05-31 5:34 ` Neil Holmes
2002-05-30 18:19 ` Blaz Antonic
2002-05-30 11:57 ` Stefan de Konink
2002-05-30 19:18 ` Blaz Antonic
2002-05-30 7:40 neil.holmes
2002-05-30 16:47 Neil Holmes
2002-05-31 16:13 Neil Holmes
[not found] <Pine.LNX.4.21.0205302112040.15697-100000@Consulate.UFP.CX>
2002-06-01 0:25 ` Blaz Antonic
2002-06-10 14:29 ELKS Distribution Daniele D'Elia
[not found] <Pine.LNX.4.33.0206100912170.8487-100000@zeus.edeclaracion.com>
2002-06-10 15:22 ` Daniele D'Elia
2002-06-10 15:35 ` Miguel Bolanos
2002-12-18 20:08 ELKS distribution Gábor Lénárt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CEE4B39.3223FB2A@dit.upm.es \
--to=jsedano@dit.upm.es \
--cc=linux-8086@vger.kernel.org \
--cc=neil.holmes@zoom.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox