RE: Elks Distribution

["Neil Holmes" <neil.holmes@zoom.co.uk>]

I have run the 0.0.4 distribution install with fs type = "80" as indicated
by Riley and all seems to be fine. I will amend my install instructions.

The significant issue, then, appears to be the DOS fdisk to start with.

Apologies for any confusion that I have caused.

Thanks

Neil

-----Original Message-----
From: linux-8086-owner@vger.kernel.org
[mailto:linux-8086-owner@vger.kernel.org]On Behalf Of Stefan de Konink
Sent: 30 May 2002 20:39
To: Riley Williams
Cc: neil.holmes@zoom.co.uk; Linux 8086
Subject: Re: Elks Distribution


I tryed type 80 do, but it gets an not minix fs too. Some other person
helped me with changing the scripts (mounting the image as loopback
device), cause it maybe had something to do with the harddisk itself, i
got thru the installation with a harddisksize of 5,5mb but the thing
wouldn't unmount and ended up in errors. We modified the scripts so that
we could manually could unmount & cat the  bootsector, but machine didn't
liked it...
I didn't fdisk in DOS... but if needed, i will do this.
Btw in the documents of Neil is type 81 used instand of type 80.


Going to try my luck tomorrow,

Stefan de Konink

On Thu, 30 May 2002, Riley Williams wrote:

> Hi Stefaan.
>
> > First error:
> > Dev 0301 is not minix fs
> >
> > fdisked a 20mb drive with type=81 0-631blocks
> >
> > Help :'(
>
> ELKS uses minixfs which is type 80 not type 81 as you used.
>
> Best wishes from Riley.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-8086" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

-
To unsubscribe from this list: send the line "unsubscribe linux-8086" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html