From: Shuai Xue <xueshuai@linux.alibaba.com>
To: Dave Jiang <dave.jiang@intel.com>,
linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
guohanjun@huawei.com, mchehab@kernel.org, terry.bowman@amd.com,
sashiko-bot@kernel.org
Subject: Re: [PATCH v3 06/10] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion
Date: Wed, 12 Aug 2026 21:06:35 +0800 [thread overview]
Message-ID: <62f740bf-beb0-42fe-9e11-6724d1d2ede2@linux.alibaba.com> (raw)
In-Reply-To: <20260717161647.1493259-7-dave.jiang@intel.com>
On 7/18/26 12:16 AM, Dave Jiang wrote:
> sashiko-bot flagged an AB-BA deadlock between the PCI device_lock and
> the MCE decoder chain rwsem.
>
> extlog_print() calls cxl_cper_handle_prot_err() synchronously while the
> MCE notifier chain rwsem is held, and that path takes the PCI device_lock
> via guard(device)(). The probe path takes the locks in the opposite
> order (device_lock held while mce_register_decode_chain() takes the
> rwsem), so the two form an AB-BA deadlock.
>
> ghes.c already avoids this by posting protocol errors to a kfifo and
> handling them from a workqueue via cxl_cper_post_prot_err(). Export that
> function and use it from acpi_extlog.c instead of calling
> cxl_cper_handle_prot_err() directly.
>
> Reported-by: sashiko-bot@kernel.org
> Link: https://lore.kernel.org/linux-cxl/20260709165457.8BA181F000E9@smtp.kernel.org/
> Assisted-by: Claude:claude-sonnet-4-6
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
> ---
> drivers/acpi/acpi_extlog.c | 23 +++--------------------
> drivers/acpi/apei/ghes.c | 5 +++--
> include/acpi/ghes.h | 4 ++++
> 3 files changed, 10 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c
> index 0c440d75d9a7..ae79d090de33 100644
> --- a/drivers/acpi/acpi_extlog.c
> +++ b/drivers/acpi/acpi_extlog.c
> @@ -172,23 +172,6 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
> #endif
> }
>
> -static void
> -extlog_cxl_cper_handle_prot_err(struct cxl_cper_sec_prot_err *prot_err,
> - int severity, u32 len)
> -{
> -#ifdef ACPI_APEI_PCIEAER
> - struct cxl_cper_prot_err_work_data wd;
> -
> - if (cxl_cper_sec_prot_err_valid(prot_err, len))
> - return;
> -
> - if (cxl_cper_setup_prot_err_work_data(&wd, prot_err, severity))
> - return;
> -
> - cxl_cper_handle_prot_err(&wd);
> -#endif
> -}
> -
> static int extlog_print(struct notifier_block *nb, unsigned long val,
> void *data)
> {
> @@ -244,9 +227,9 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
> struct cxl_cper_sec_prot_err *prot_err =
> acpi_hest_get_payload(gdata);
>
> - extlog_cxl_cper_handle_prot_err(prot_err,
> - gdata->error_severity,
> - gdata->error_data_length);
> + cxl_cper_post_prot_err(prot_err,
> + gdata->error_severity,
> + gdata->error_data_length);
> } else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
> struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
>
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 17e4ef555292..b8dbd99da47e 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -752,8 +752,8 @@ static DEFINE_KFIFO(cxl_cper_prot_err_fifo, struct cxl_cper_prot_err_work_data,
> static DEFINE_SPINLOCK(cxl_cper_prot_err_work_lock);
> struct work_struct *cxl_cper_prot_err_work;
>
> -static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
> - int severity, u32 len)
> +void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
> + int severity, u32 len)
> {
> #ifdef CONFIG_ACPI_APEI_PCIEAER
> struct cxl_cper_prot_err_work_data wd;
> @@ -777,6 +777,7 @@ static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
> schedule_work(cxl_cper_prot_err_work);
> #endif
> }
> +EXPORT_SYMBOL_FOR_MODULES(cxl_cper_post_prot_err, "acpi_extlog");
>
> int cxl_cper_register_prot_err_work(struct work_struct *work)
> {
> diff --git a/include/acpi/ghes.h b/include/acpi/ghes.h
> index 8d7e5caef3f1..4dcbb2c30ea2 100644
> --- a/include/acpi/ghes.h
> +++ b/include/acpi/ghes.h
> @@ -143,4 +143,8 @@ static inline int ghes_notify_sea(void) { return -ENOENT; }
> struct notifier_block;
> extern void ghes_register_report_chain(struct notifier_block *nb);
> extern void ghes_unregister_report_chain(struct notifier_block *nb);
> +
> +struct cxl_cper_sec_prot_err;
> +void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
> + int severity, u32 len);
> #endif /* GHES_H */
The declaration lands outside the CONFIG_ACPI_APEI_GHES section,
but the definition only exists in ghes.c, which is not built when
ACPI_APEI_GHES is disabled. ACPI_EXTLOG doesn't depend on GHES, so
GHES=n + EXTLOG=m is a legal config and modpost will fail on the
missing symbol. Either move the declaration into the GHES block with
a stub in the #else, or add the Kconfig dependency.
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Thanks.
Shuai
next prev parent reply other threads:[~2026-08-12 13:06 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-17 16:16 [PATCH v3 00/10] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-07-17 16:16 ` [PATCH v3 01/10] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-07-20 12:21 ` Hanjun Guo
2026-07-20 16:15 ` Dave Jiang
2026-07-20 16:23 ` Alison Schofield
2026-08-12 12:10 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 02/10] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-07-20 16:24 ` Alison Schofield
2026-08-12 12:23 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 03/10] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-07-20 16:25 ` Alison Schofield
2026-08-12 12:30 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 04/10] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-07-20 16:25 ` Alison Schofield
2026-08-12 12:32 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 05/10] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-07-20 16:26 ` Alison Schofield
2026-08-12 12:59 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 06/10] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-07-20 16:26 ` Alison Schofield
2026-08-12 13:06 ` Shuai Xue [this message]
2026-07-17 16:16 ` [PATCH v3 07/10] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-07-17 21:24 ` Dave Jiang
2026-07-20 16:27 ` Alison Schofield
2026-08-12 13:10 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 08/10] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-07-20 16:28 ` Alison Schofield
2026-08-12 13:14 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 09/10] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata Dave Jiang
2026-07-20 16:28 ` Alison Schofield
2026-08-12 13:16 ` Shuai Xue
2026-07-17 16:16 ` [PATCH v3 10/10] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-07-20 16:29 ` Alison Schofield
2026-08-12 13:18 ` Shuai Xue
2026-07-21 11:33 ` [PATCH v3 00/10] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Rafael J. Wysocki (Intel)
2026-07-21 15:06 ` Dave Jiang
2026-08-14 20:16 ` Rafael J. Wysocki (Intel)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=62f740bf-beb0-42fe-9e11-6724d1d2ede2@linux.alibaba.com \
--to=xueshuai@linux.alibaba.com \
--cc=bp@alien8.de \
--cc=dave.jiang@intel.com \
--cc=guohanjun@huawei.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rafael@kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=terry.bowman@amd.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox