Linux-Amlogic Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>
Cc: Kevin Hilman <khilman@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	dri-devel@lists.freedesktop.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] drm/meson: dw-hdmi: power up phy on device init
Date: Fri, 3 May 2024 10:42:36 +0200	[thread overview]
Message-ID: <bc8523bb-8d51-46c6-a011-7c46bb62acfa@linaro.org> (raw)
In-Reply-To: <20240426160256.3089978-2-jbrunet@baylibre.com>

On 26/04/2024 18:02, Jerome Brunet wrote:
> The phy is not in a useful state right after init. It will become useful,
> including for auxiliary function such as CEC or ARC, after the first mode
> is set. This is a problem on systems where the display is using another
> interface like DSI or CVBS.
> 
> This change refactor the init and mode change callback to power up the PHY
> on init and leave only what is necessary for mode changes in the related
> function. This is enough to fix CEC operation when HDMI display is not
> enabled.
> 
> Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>   drivers/gpu/drm/meson/meson_dw_hdmi.c | 51 +++++++++------------------
>   1 file changed, 17 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index 5a9538bc0e26..a83d93078537 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -384,26 +384,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>   	    dw_hdmi_bus_fmt_is_420(hdmi))
>   		mode_is_420 = true;
>   
> -	/* Enable clocks */
> -	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
> -
> -	/* Bring HDMITX MEM output of power down */
> -	regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0);
> -
> -	/* Bring out of reset */
> -	dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_SW_RESET,  0);
> -
> -	/* Enable internal pixclk, tmds_clk, spdif_clk, i2s_clk, cecclk */
> -	dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
> -			       0x3, 0x3);
> -
> -	/* Enable cec_clk and hdcp22_tmdsclk_en */
> -	dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
> -			       0x3 << 4, 0x3 << 4);
> -
> -	/* Enable normal output to PHY */
> -	dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
> -
>   	/* TMDS pattern setup */
>   	if (mode->clock > 340000 && !mode_is_420) {
>   		dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
> @@ -425,20 +405,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>   	/* Setup PHY parameters */
>   	meson_hdmi_phy_setup_mode(dw_hdmi, mode, mode_is_420);
>   
> -	/* Setup PHY */
> -	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
> -			   0xffff << 16, 0x0390 << 16);
> -
> -	/* BIT_INVERT */
> -	if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
> -	    dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
> -	    dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-g12a-dw-hdmi"))
> -		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
> -				   BIT(17), 0);
> -	else
> -		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
> -				   BIT(17), BIT(17));
> -
>   	/* Disable clock, fifo, fifo_wr */
>   	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0);
>   
> @@ -656,6 +622,23 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
>   	meson_dw_hdmi->data->top_write(meson_dw_hdmi,
>   				       HDMITX_TOP_CLK_CNTL, 0xff);
>   
> +	/* Enable normal output to PHY */
> +	meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
> +
> +	/* Setup PHY */
> +	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
> +			   0xffff << 16, 0x0390 << 16);
> +
> +	/* BIT_INVERT */
> +	if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
> +	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
> +	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi"))
> +		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
> +				   BIT(17), 0);
> +	else
> +		regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
> +				   BIT(17), BIT(17));
> +
>   	/* Enable HDMI-TX Interrupt */
>   	meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
>   				       HDMITX_TOP_INTR_CORE);

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2024-05-03  8:42 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-26 16:02 [PATCH 0/2] drm/meson: fix hdmi auxiliary system operation without display Jerome Brunet
2024-04-26 16:02 ` [PATCH 1/2] drm/meson: dw-hdmi: power up phy on device init Jerome Brunet
2024-05-03  8:42   ` Neil Armstrong [this message]
2024-04-26 16:02 ` [PATCH 2/2] drm/meson: dw-hdmi: add bandgap setting for g12 Jerome Brunet
2024-05-03  8:46   ` Neil Armstrong
2024-05-03  8:51 ` [PATCH 0/2] drm/meson: fix hdmi auxiliary system operation without display Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bc8523bb-8d51-46c6-a011-7c46bb62acfa@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mripard@kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox