* [PATCH v3 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes
2016-12-01 9:05 [PATCH v3 0/4] drm: Add support for the Amlogic Video Processing Unit Neil Armstrong
@ 2016-12-01 9:05 ` Neil Armstrong
2016-12-01 9:05 ` [PATCH v3 3/4] dt-bindings: display: add Amlogic Meson DRM Bindings Neil Armstrong
2016-12-01 9:06 ` [PATCH v3 4/4] MAINTAINERS: add entry for Amlogic DRM drivers Neil Armstrong
2 siblings, 0 replies; 5+ messages in thread
From: Neil Armstrong @ 2016-12-01 9:05 UTC (permalink / raw)
To: linux-arm-kernel
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
boards.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 ++++
8 files changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fc033c0..eada0b5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -356,5 +356,21 @@
status = "disabled";
};
};
+
+ vpu: vpu at d0100000 {
+ compatible = "amlogic,meson-gx-vpu";
+ reg = <0x0 0xd0100000 0x0 0x100000>,
+ <0x0 0xc883c000 0x0 0x1000>,
+ <0x0 0xc8838000 0x0 0x1000>;
+ reg-names = "vpu", "hhi", "dmc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ cvbs_vdac_port: port at 0 {
+ reg = <0>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 9696820..4cbd626 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -142,6 +142,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -229,3 +239,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 203be28..4a96e0f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -125,6 +125,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -234,3 +244,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ac5ad3b..5353a20 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -506,3 +506,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
index e99101a..cea4a3e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
@@ -117,6 +117,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -203,3 +213,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 9f89b99..5c7a8fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -299,3 +299,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index d320727..f2d0861 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -90,6 +90,16 @@
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -167,3 +177,9 @@
max-speed = <1000>;
};
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index c1974bb..eb2f0c3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -112,3 +112,7 @@
};
};
};
+
+&vpu {
+ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v3 3/4] dt-bindings: display: add Amlogic Meson DRM Bindings
2016-12-01 9:05 [PATCH v3 0/4] drm: Add support for the Amlogic Video Processing Unit Neil Armstrong
2016-12-01 9:05 ` [PATCH v3 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes Neil Armstrong
@ 2016-12-01 9:05 ` Neil Armstrong
2016-12-06 0:26 ` Rob Herring
2016-12-01 9:06 ` [PATCH v3 4/4] MAINTAINERS: add entry for Amlogic DRM drivers Neil Armstrong
2 siblings, 1 reply; 5+ messages in thread
From: Neil Armstrong @ 2016-12-01 9:05 UTC (permalink / raw)
To: linux-arm-kernel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/display/amlogic,meson-vpu.txt | 112 +++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
new file mode 100644
index 0000000..00f74ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -0,0 +1,112 @@
+Amlogic Meson Display Controller
+================================
+
+The Amlogic Meson Display controller is composed of several components
+that are going to be documented below:
+
+DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
+ | vd1 _______ _____________ _________________ | |
+D |-------| |----| | | | | HDMI PLL |
+D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK |
+R |-------| |----| Processing | | | | |
+ | osd2 | | | |---| Enci ----------|----|-----VDAC------|
+R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----|
+A | osd1 | | | Blenders | | Encl ----------|----|---------------|
+M |-------|______|----|____________| |________________| | |
+___|__________________________________________________________|_______________|
+
+
+VIU: Video Input Unit
+---------------------
+
+The Video Input Unit is in charge of the pixel scanout from the DDR memory.
+It fetches the frames addresses, stride and parameters from the "Canvas" memory.
+This part is also in charge of the CSC (Colorspace Conversion).
+It can handle 2 OSD Planes and 2 Video Planes.
+
+VPP: Video Post Processing
+--------------------------
+
+The Video Post Processing is in charge of the scaling and blending of the
+various planes into a single pixel stream.
+There is a special "pre-blending" used by the video planes with a dedicated
+scaler and a "post-blending" to merge with the OSD Planes.
+The OSD planes also have a dedicated scaler for one of the OSD.
+
+VENC: Video Encoders
+--------------------
+
+The VENC is composed of the multiple pixel encoders :
+ - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
+ - ENCP : Progressive Video Encoder for HDMI
+ - ENCL : LCD LVDS Encoder
+The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
+tree and provides the scanout clock to the VPP and VIU.
+The ENCI is connected to a single VDAC for Composite Output.
+The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
+
+Device Tree Bindings:
+---------------------
+
+VPU: Video Processing Unit
+--------------------------
+
+Required properties:
+- compatible: value should be different for each SoC family as :
+ - GXBB (S905) : "amlogic,meson-gxbb-vpu"
+ - GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
+ - GXM (S912) : "amlogic,meson-gxm-vpu"
+ followed by the common "amlogic,meson-gx-vpu"
+- reg: base address and size of he following memory-mapped regions :
+ - vpu
+ - hhi
+ - dmc
+- reg-names: should contain the names of the previous memory regions
+- interrupts: should contain the VENC Vsync interrupt number
+
+Required nodes:
+
+The connections to the VPU output video ports are modeled using the OF graph
+bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+The following table lists for each supported model the port number
+corresponding to each VPU output.
+
+ Port 0 Port 1
+-----------------------------------------
+ S905 (GXBB) CVBS VDAC HDMI-TX
+ S905X (GXL) CVBS VDAC HDMI-TX
+ S905D (GXL) CVBS VDAC HDMI-TX
+ S912 (GXM) CVBS VDAC HDMI-TX
+
+Example:
+
+tv-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+};
+
+vpu: vpu at d0100000 {
+ compatible = "amlogic,meson-gxbb-vpu";
+ reg = <0x0 0xd0100000 0x0 0x100000>,
+ <0x0 0xc883c000 0x0 0x1000>,
+ <0x0 0xc8838000 0x0 0x1000>;
+ reg-names = "vpu", "hhi", "dmc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ port at 0 {
+ reg = <0>;
+
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread