[PATCH] ARM: dts: sun6i: hummingbird: Enable USB OTG

[PATCH] ARM: dts: sun6i: hummingbird: Enable USB OTG

[Chen-Yu Tsai]

The A31 Hummingbird has a mini USB OTG port, and uses GPIO pins from the
SoC for ID pin and VBUS detection and VBUS control. The PMIC can also do
VBUS detection and control.

Here we prefer to use the PMIC's DRIVEVBUS function to control VBUS for
USB OTG, as that is the hardware default.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 83643bbd51dc..f094eeb6c499 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -248,6 +248,7 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
 	};
 };
 
@@ -306,6 +307,11 @@
 	regulator-name = "vcc-dram";
 };
 
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 	status = "okay";
@@ -330,12 +336,25 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usb1_vbus_pin_a {
 	/* different pin from sunxi-common-regulators */
 	pins = "PH24";
 };
 
 &usbphy {
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
-- 
2.10.2

[PATCH] ARM: dts: sun6i: hummingbird: Enable USB OTG

[Maxime Ripard]

On Thu, Nov 24, 2016 at 07:29:08PM +0800, Chen-Yu Tsai wrote:
> The A31 Hummingbird has a mini USB OTG port, and uses GPIO pins from the
> SoC for ID pin and VBUS detection and VBUS control. The PMIC can also do
> VBUS detection and control.
> 
> Here we prefer to use the PMIC's DRIVEVBUS function to control VBUS for
> USB OTG, as that is the hardware default.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161124/fb996ac4/attachment.sig>