From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/8] arm64: limit PA size to supported range
Date: Fri, 22 Dec 2017 15:23:01 +0000 [thread overview]
Message-ID: <20171222152307.11252-3-catalin.marinas@arm.com> (raw)
In-Reply-To: <20171222152307.11252-1-catalin.marinas@arm.com>
From: Kristina Martsenko <kristina.martsenko@arm.com>
We currently copy the physical address size from
ID_AA64MMFR0_EL1.PARange directly into TCR.(I)PS. This will not work for
4k and 16k granule kernels on systems that support 52-bit physical
addresses, since 52-bit addresses are only permitted with the 64k
granule.
To fix this, fall back to 48 bits when configuring the PA size when the
kernel does not support 52-bit PAs. When it does, fall back to 52, to
avoid similar problems in the future if the PA size is ever increased
above 52.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[catalin.marinas at arm.com: tcr_set_pa_size macro renamed to tcr_compute_pa_size]
[catalin.marinas at arm.com: comments added to tcr_compute_pa_size]
[catalin.marinas at arm.com: definitions added for TCR_*PS_SHIFT]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/assembler.h | 18 ++++++++++++++++++
arch/arm64/include/asm/pgtable-hwdef.h | 2 ++
arch/arm64/include/asm/sysreg.h | 8 ++++++++
arch/arm64/kvm/hyp-init.S | 6 ++----
arch/arm64/kvm/hyp/s2-setup.c | 2 ++
arch/arm64/mm/proc.S | 6 ++----
6 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index aef72d886677..04a92307e6c1 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -351,6 +351,24 @@ alternative_endif
.endm
/*
+ * tcr_compute_pa_size - set TCR.(I)PS to the highest supported
+ * ID_AA64MMFR0_EL1.PARange value
+ *
+ * tcr: register with the TCR_ELx value to be updated
+ * pos: PARange bitfield position
+ * tmp{0,1}: temporary registers
+ */
+ .macro tcr_compute_pa_size, tcr, pos, tmp0, tmp1
+ mrs \tmp0, ID_AA64MMFR0_EL1
+ // Narrow PARange to fit the PS field in TCR_ELx
+ ubfx \tmp0, \tmp0, #ID_AA64MMFR0_PARANGE_SHIFT, #3
+ mov \tmp1, #ID_AA64MMFR0_PARANGE_MAX
+ cmp \tmp0, \tmp1
+ csel \tmp0, \tmp1, \tmp0, hi
+ bfi \tcr, \tmp0, \pos, #3
+ .endm
+
+/*
* Macro to perform a data cache maintenance for the interval
* [kaddr, kaddr + size)
*
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index c1de9f67980b..9be2e9371c52 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -272,6 +272,8 @@
#define TCR_TG1_4K (UL(2) << TCR_TG1_SHIFT)
#define TCR_TG1_64K (UL(3) << TCR_TG1_SHIFT)
+#define TCR_IPS_SHIFT 32
+#define TCR_IPS_MASK (UL(7) << TCR_IPS_SHIFT)
#define TCR_ASID16 (UL(1) << 36)
#define TCR_TBI0 (UL(1) << 37)
#define TCR_HA (UL(1) << 39)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 08cc88574659..ec144f480b39 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -471,6 +471,14 @@
#define ID_AA64MMFR0_TGRAN64_SUPPORTED 0x0
#define ID_AA64MMFR0_TGRAN16_NI 0x0
#define ID_AA64MMFR0_TGRAN16_SUPPORTED 0x1
+#define ID_AA64MMFR0_PARANGE_48 0x5
+#define ID_AA64MMFR0_PARANGE_52 0x6
+
+#ifdef CONFIG_ARM64_PA_BITS_52
+#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_52
+#else
+#define ID_AA64MMFR0_PARANGE_MAX ID_AA64MMFR0_PARANGE_48
+#endif
/* id_aa64mmfr1 */
#define ID_AA64MMFR1_PAN_SHIFT 20
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index 3f9615582377..e2d1fe03662a 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -90,11 +90,9 @@ __do_hyp_init:
bfi x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
#endif
/*
- * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
- * TCR_EL2.
+ * Set the PS bits in TCR_EL2.
*/
- mrs x5, ID_AA64MMFR0_EL1
- bfi x4, x5, #16, #3
+ tcr_compute_pa_size x4, #TCR_EL2_PS_SHIFT, x5, x6
msr tcr_el2, x4
diff --git a/arch/arm64/kvm/hyp/s2-setup.c b/arch/arm64/kvm/hyp/s2-setup.c
index a81f5e10fc8c..603e1ee83e89 100644
--- a/arch/arm64/kvm/hyp/s2-setup.c
+++ b/arch/arm64/kvm/hyp/s2-setup.c
@@ -32,6 +32,8 @@ u32 __hyp_text __init_stage2_translation(void)
* PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2...
*/
parange = read_sysreg(id_aa64mmfr0_el1) & 7;
+ if (parange > ID_AA64MMFR0_PARANGE_MAX)
+ parange = ID_AA64MMFR0_PARANGE_MAX;
val |= parange << 16;
/* Compute the actual PARange... */
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 95233dfc4c39..4f133cb340dc 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -228,11 +228,9 @@ ENTRY(__cpu_setup)
tcr_set_idmap_t0sz x10, x9
/*
- * Read the PARange bits from ID_AA64MMFR0_EL1 and set the IPS bits in
- * TCR_EL1.
+ * Set the IPS bits in TCR_EL1.
*/
- mrs x9, ID_AA64MMFR0_EL1
- bfi x10, x9, #32, #3
+ tcr_compute_pa_size x10, #TCR_IPS_SHIFT, x5, x6
#ifdef CONFIG_ARM64_HW_AFDBM
/*
* Hardware update of the Access and Dirty bits.
next prev parent reply other threads:[~2017-12-22 15:23 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-22 15:22 [PATCH v2 0/8] arm64: 52-bit physical address support Catalin Marinas
2017-12-22 15:23 ` [PATCH v2 1/8] arm64: add kconfig symbol to configure physical address size Catalin Marinas
2017-12-22 15:30 ` Marc Zyngier
2017-12-22 15:23 ` Catalin Marinas [this message]
2018-01-09 19:32 ` [PATCH v2 2/8] arm64: limit PA size to supported range Kristina Martsenko
2017-12-22 15:23 ` [PATCH v2 3/8] arm64: handle 52-bit addresses in TTBR Catalin Marinas
2017-12-22 15:44 ` Suzuki K Poulose
2017-12-22 15:23 ` [PATCH v2 4/8] arm64: head.S: handle 52-bit PAs in PTEs in early page table setup Catalin Marinas
2017-12-22 15:34 ` Marc Zyngier
2017-12-22 15:23 ` [PATCH v2 5/8] arm64: don't open code page table entry creation Catalin Marinas
2017-12-22 15:40 ` Marc Zyngier
2017-12-22 15:58 ` Suzuki K Poulose
2017-12-22 15:23 ` [PATCH v2 6/8] arm64: handle 52-bit physical addresses in page table entries Catalin Marinas
2017-12-22 15:23 ` [PATCH v2 7/8] arm64: allow ID map to be extended to 52 bits Catalin Marinas
2017-12-22 15:42 ` Marc Zyngier
2017-12-22 16:34 ` Suzuki K Poulose
2017-12-22 16:57 ` Suzuki K Poulose
2018-01-09 19:31 ` Kristina Martsenko
2018-01-10 10:58 ` Suzuki K Poulose
2018-01-09 19:29 ` Kristina Martsenko
2018-01-12 11:48 ` Kristina Martsenko
2018-01-13 12:16 ` Marc Zyngier
2017-12-22 15:23 ` [PATCH v2 8/8] arm64: enable 52-bit physical address support Catalin Marinas
2017-12-22 15:43 ` Marc Zyngier
2017-12-22 16:22 ` Suzuki K Poulose
2018-01-09 19:33 ` [PATCH v2 0/8] arm64: " Kristina Martsenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171222152307.11252-3-catalin.marinas@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox