Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: sun8i: a83t: bananapi-m3: Add LED device nodes
@ 2018-01-03  6:28 Chen-Yu Tsai
  2018-01-04 14:10 ` Maxime Ripard
  0 siblings, 1 reply; 3+ messages in thread
From: Chen-Yu Tsai @ 2018-01-03  6:28 UTC (permalink / raw)
  To: linux-arm-kernel

The Bananapi M3 has two controllable LEDs, blue and green, that are tied
to the PMIC's two GPIO pins.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 6550bf0e594b..78fe61d97790 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -60,6 +60,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bananapi-m3:blue:usr";
+			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapi-m3:green:usr";
+			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	reg_usb1_vbus: reg-usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
-- 
2.15.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2018-02-13  9:54 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-03  6:28 [PATCH] ARM: dts: sun8i: a83t: bananapi-m3: Add LED device nodes Chen-Yu Tsai
2018-01-04 14:10 ` Maxime Ripard
2018-02-13  9:54   ` Chen-Yu Tsai

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox