[PATCH 2/2] ARM: sun8i: h3: add SY8113B regulator on Banana Pi M2 Zero board

[PATCH 2/2] ARM: sun8i: h3: add SY8113B regulator on Banana Pi M2 Zero board

[Icenowy Zheng]

Banana Pi M2 Zero board has a SY8113B regulator, which is controlled via
GPIO and capable of outputing 1.1V when the PL1 GPIO is set to output 0
or 1.1V when the PL6 GPIO is set to input or output 1, and the output is
the power supply of the ARM cores in H3 SoC.

Add the device tree node of this regulator and set the cpu's cpu-supply
property to it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index eb61dcf32797..abc8dc750f4b 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -59,6 +59,23 @@
 		};
 	};
 
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0x0
+			  1300000 0x1>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -66,6 +83,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
-- 
2.17.1

[linux-sunxi] [PATCH 2/2] ARM: sun8i: h3: add SY8113B regulator on Banana Pi M2 Zero board

[Chen-Yu Tsai]

Hi,

On Wed, Jul 11, 2018 at 9:44 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> Banana Pi M2 Zero board has a SY8113B regulator, which is controlled via
> GPIO and capable of outputing 1.1V when the PL1 GPIO is set to output 0
> or 1.1V when the PL6 GPIO is set to input or output 1, and the output is
> the power supply of the ARM cores in H3 SoC.
>
> Add the device tree node of this regulator and set the cpu's cpu-supply
> property to it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 21 +++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> index eb61dcf32797..abc8dc750f4b 100644
> --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> @@ -59,6 +59,23 @@
>                 };
>         };
>
> +       reg_vdd_cpux: vdd-cpux-regulator {
> +               compatible = "regulator-gpio";
> +               regulator-name = "vdd-cpux";
> +               regulator-type = "voltage";
> +               regulator-boot-on;
> +               regulator-always-on;
> +               regulator-min-microvolt = <1100000>;
> +               regulator-max-microvolt = <1300000>;
> +               regulator-ramp-delay = <50>; /* 4ms */
> +
> +               gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
> +               enable-active-high;
> +               gpios-states = <0x1>;
> +               states = <1100000 0x0

So looking@the schematics with the resistor values, this calculates
to roughly 1.108475 (0.6 * (1 + 10 / 11.8)) ...

> +                         1300000 0x1>;

and this to 1.308475.

ChenYu

> +       };
> +
>         wifi_pwrseq: wifi_pwrseq {
>                 compatible = "mmc-pwrseq-simple";
>                 pinctrl-names = "default";
> @@ -66,6 +83,10 @@
>         };
>  };
>
> +&cpu0 {
> +       cpu-supply = <&reg_vdd_cpux>;
> +};
> +
>  &de {
>         status = "okay";
>  };
> --
> 2.17.1
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[linux-sunxi] [PATCH 2/2] ARM: sun8i: h3: add SY8113B regulator on Banana Pi M2 Zero board

[Icenowy Zheng]

? 2018?7?11? GMT+08:00 ??10:15:41, Chen-Yu Tsai <wens@csie.org> ??:
>Hi,
>
>On Wed, Jul 11, 2018 at 9:44 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
>> Banana Pi M2 Zero board has a SY8113B regulator, which is controlled
>via
>> GPIO and capable of outputing 1.1V when the PL1 GPIO is set to output
>0
>> or 1.1V when the PL6 GPIO is set to input or output 1, and the output
>is
>> the power supply of the ARM cores in H3 SoC.
>>
>> Add the device tree node of this regulator and set the cpu's
>cpu-supply
>> property to it.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> ---
>>  .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 21
>+++++++++++++++++++
>>  1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> index eb61dcf32797..abc8dc750f4b 100644
>> --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> @@ -59,6 +59,23 @@
>>                 };
>>         };
>>
>> +       reg_vdd_cpux: vdd-cpux-regulator {
>> +               compatible = "regulator-gpio";
>> +               regulator-name = "vdd-cpux";
>> +               regulator-type = "voltage";
>> +               regulator-boot-on;
>> +               regulator-always-on;
>> +               regulator-min-microvolt = <1100000>;
>> +               regulator-max-microvolt = <1300000>;
>> +               regulator-ramp-delay = <50>; /* 4ms */
>> +
>> +               gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
>> +               enable-active-high;
>> +               gpios-states = <0x1>;
>> +               states = <1100000 0x0
>
>So looking at the schematics with the resistor values, this calculates
>to roughly 1.108475 (0.6 * (1 + 10 / 11.8)) ...
>
>> +                         1300000 0x1>;
>
>and this to 1.308475.

But I think it cannot reach such accuracy, because of the
error of component values and the error of the power voltage.

In addition, set it to a too accurate value may break the
common opp table.

>
>ChenYu
>
>> +       };
>> +
>>         wifi_pwrseq: wifi_pwrseq {
>>                 compatible = "mmc-pwrseq-simple";
>>                 pinctrl-names = "default";
>> @@ -66,6 +83,10 @@
>>         };
>>  };
>>
>> +&cpu0 {
>> +       cpu-supply = <&reg_vdd_cpux>;
>> +};
>> +
>>  &de {
>>         status = "okay";
>>  };
>> --
>> 2.17.1
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an email to linux-sunxi+unsubscribe at googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.

[PATCH 2/2] ARM: sun8i: h3: add SY8113B regulator on Banana Pi M2 Zero board

[Maxime Ripard]

On Wed, Jul 11, 2018 at 09:44:50PM +0800, Icenowy Zheng wrote:
> Banana Pi M2 Zero board has a SY8113B regulator, which is controlled via
> GPIO and capable of outputing 1.1V when the PL1 GPIO is set to output 0
> or 1.1V when the PL6 GPIO is set to input or output 1, and the output is
> the power supply of the ARM cores in H3 SoC.
> 
> Add the device tree node of this regulator and set the cpu's cpu-supply
> property to it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180712/6ebef85c/attachment.sig>