From: Maxime Ripard <maxime@cerno.tech>
To: Ruslan Zalata <rz@fabmicro.ru>
Cc: Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v2] hwmon: (sun4i-lradc) Add driver for LRADC found on Allwinner A13/A20 SoC
Date: Mon, 2 May 2022 13:00:10 +0200 [thread overview]
Message-ID: <20220502110010.q7vvdkdpaiz5acjl@houat> (raw)
In-Reply-To: <20220428210906.29527-1-rz@fabmicro.ru>
[-- Attachment #1.1: Type: text/plain, Size: 2469 bytes --]
Hi,
On Thu, Apr 28, 2022 at 09:09:03PM +0000, Ruslan Zalata wrote:
> Some Allwinner SoCs like A13, A20 or T2 are equipped with two-channel
> low rate (6 bit) ADC that is often used for extra keys. There's a driver
> for that already implementing standard input device, but it has these
> limitations: 1) it cannot be used for general ADC data equisition, and
> 2) it uses only one LRADC channel of two available.
>
> This driver provides basic hwmon interface to both channels of LRADC on
> such Allwinner SoCs.
>
> Signed-off-by: Ruslan Zalata <rz@fabmicro.ru>
> ---
> MAINTAINERS | 6 +
> drivers/hwmon/Kconfig | 13 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/sun4i-lradc-hwmon.c | 280 ++++++++++++++++++++++++++++++
> 4 files changed, 300 insertions(+)
> create mode 100644 drivers/hwmon/sun4i-lradc-hwmon.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5e8c2f61176..d9c71e94133 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18861,6 +18861,12 @@ S: Maintained
> F: Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
> F: drivers/input/keyboard/sun4i-lradc-keys.c
>
> +SUN4I LOW RES ADC HWMON DRIVER
> +M: Ruslan Zalata <rz@fabmicro.ru>
> +L: linux-hwmon@vger.kernel.org
> +S: Maintained
> +F: drivers/hwmon/sun4i-lradc-hwmon.c
> +
> SUNDANCE NETWORK DRIVER
> M: Denis Kirjanov <kda@linux-powerpc.org>
> L: netdev@vger.kernel.org
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 68a8a27ab3b..86776488a81 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1691,6 +1691,19 @@ config SENSORS_SIS5595
> This driver can also be built as a module. If so, the module
> will be called sis5595.
>
> +config SENSORS_SUN4I_LRADC
> + tristate "Allwinner A13/A20 LRADC hwmon"
> + depends on ARCH_SUNXI && !KEYBOARD_SUN4I_LRADC
> + help
> + Say y here to support the LRADC found in Allwinner A13/A20 SoCs.
> + Both channels are supported.
> +
> + This driver can also be built as module. If so, the module
> + will be called sun4i-lradc-hwmon.
> +
> + This option is not compatible with KEYBOARD_SUN4I_LRADC, one
> + of these must be used at a time.
How do you plan on enforcing that?
I guess a better path forward would be to either register an hwmon
device in the original driver, or convert that driver to iio and use
iio-hwmon.
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-02 11:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220428210906.29527-1-rz@fabmicro.ru>
2022-04-28 21:30 ` [PATCH v2] hwmon: (sun4i-lradc) Add driver for LRADC found on Allwinner A13/A20 SoC Guenter Roeck
2022-04-29 0:28 ` Ruslan Zalata
2022-04-29 5:32 ` Guenter Roeck
2022-04-29 6:03 ` Guenter Roeck
2022-05-02 23:47 ` Ruslan Zalata
2022-04-29 13:24 ` Jonathan Cameron
2022-05-02 23:20 ` Ruslan Zalata
2022-05-02 11:00 ` Maxime Ripard [this message]
2022-05-02 11:15 ` Icenowy Zheng
2022-05-02 11:21 ` Maxime Ripard
2022-05-03 2:02 ` Guenter Roeck
2022-05-03 15:26 ` Ruslan Zalata
2022-05-03 16:14 ` Maxime Ripard
2022-05-03 21:37 ` Ruslan Zalata
2022-05-04 14:12 ` Maxime Ripard
2022-05-02 13:31 ` Guenter Roeck
2022-05-02 13:39 ` Maxime Ripard
2022-05-02 16:21 ` Guenter Roeck
2022-05-03 8:50 ` Ruslan Zalata
2022-05-03 16:07 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220502110010.q7vvdkdpaiz5acjl@houat \
--to=maxime@cerno.tech \
--cc=jdelvare@suse.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux@roeck-us.net \
--cc=rz@fabmicro.ru \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox