[PATCH] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs

[PATCH] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs

[Hari Nagalla]

The C7xv-dsp on AM62A have 32KB L1 I-cache and a 64KB L1 D-cache. It
does not have an addressable l1dram . So, remove this optional sram
property from the bindings to fix device tree build warnings.

Also set the 'memory-regions' property as optional. This is because
the remote processors can function without carveout regions.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
 .../bindings/remoteproc/ti,k3-dsp-rproc.yaml     | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
index f16e90380df1..8dd22c57e22d 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -111,7 +111,6 @@ else:
     properties:
       compatible:
         enum:
-          - ti,am62a-c7xv-dsp
           - ti,j721e-c71-dsp
           - ti,j721s2-c71-dsp
   then:
@@ -124,6 +123,20 @@ else:
         items:
           - const: l2sram
           - const: l1dram
+  else:
+    if:
+      properties:
+        compatible:
+          enum:
+            - ti,am62a-c7xv-dsp
+    then:
+      properties:
+        reg:
+          items:
+            - description: Address and Size of the L2 SRAM internal memory region
+        reg-names:
+          items:
+            - const: l2sram
 
 required:
   - compatible
@@ -135,7 +148,6 @@ required:
   - resets
   - firmware-name
   - mboxes
-  - memory-region
 
 unevaluatedProperties: false
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs

[Rob Herring]

On Thu, 10 Aug 2023 06:05:45 -0500, Hari Nagalla wrote:
> The C7xv-dsp on AM62A have 32KB L1 I-cache and a 64KB L1 D-cache. It
> does not have an addressable l1dram . So, remove this optional sram
> property from the bindings to fix device tree build warnings.
> 
> Also set the 'memory-regions' property as optional. This is because
> the remote processors can function without carveout regions.
> 
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> ---
>  .../bindings/remoteproc/ti,k3-dsp-rproc.yaml     | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810110545.11644-1-hnagalla@ti.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 1992 bytes --]

On Thu, Aug 10, 2023 at 06:05:45AM -0500, Hari Nagalla wrote:
> The C7xv-dsp on AM62A have 32KB L1 I-cache and a 64KB L1 D-cache. It
> does not have an addressable l1dram . So, remove this optional sram
> property from the bindings to fix device tree build warnings.
> 
> Also set the 'memory-regions' property as optional. This is because
> the remote processors can function without carveout regions.

I thought I already said this today, but must be hallucinating - this
second part here seems like it in an unrelated change that should go in
its own patch..

> 
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> ---
>  .../bindings/remoteproc/ti,k3-dsp-rproc.yaml     | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
> index f16e90380df1..8dd22c57e22d 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
> @@ -111,7 +111,6 @@ else:
>      properties:
>        compatible:
>          enum:
> -          - ti,am62a-c7xv-dsp
>            - ti,j721e-c71-dsp
>            - ti,j721s2-c71-dsp
>    then:
> @@ -124,6 +123,20 @@ else:
>          items:
>            - const: l2sram
>            - const: l1dram
> +  else:
> +    if:
> +      properties:
> +        compatible:
> +          enum:
> +            - ti,am62a-c7xv-dsp
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: Address and Size of the L2 SRAM internal memory region
> +        reg-names:
> +          items:
> +            - const: l2sram
>  
>  required:
>    - compatible
> @@ -135,7 +148,6 @@ required:
>    - resets
>    - firmware-name
>    - mboxes
> -  - memory-region
>  
>  unevaluatedProperties: false
>  
> -- 
> 2.34.1
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel