From: Xu Yang <xu.yang_2@nxp.com>
To: gregkh@linuxfoundation.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com
Cc: linux-imx@nxp.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, jun.li@nxp.com,
linux-usb@vger.kernel.org
Subject: [PATCH v2 2/5] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes
Date: Mon, 18 Dec 2023 16:54:53 +0800 [thread overview]
Message-ID: <20231218085456.3962720-2-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20231218085456.3962720-1-xu.yang_2@nxp.com>
Enable 2 USB nodes and add 2 PTN5150 nodes on i.MX8ULP evk board.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
Changes in v2:
- fix format as suggusted by Fabio
- add PTN5150 nodes
---
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 84 +++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 69dd8e31027c..bf418af31039 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -133,6 +133,64 @@ pcal6408: gpio@21 {
gpio-controller;
#gpio-cells = <2>;
};
+
+ ptn5150_1: typec@1d {
+ compatible = "nxp,ptn5150";
+ reg = <0x1d>;
+ int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec1>;
+ status = "disabled";
+ };
+
+ ptn5150_2: typec@3d {
+ compatible = "nxp,ptn5150";
+ reg = <0x3d>;
+ int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec2>;
+ status = "disabled";
+ };
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ over-current-active-low;
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <110>;
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ over-current-active-low;
+ status = "okay";
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <110>;
+ status = "okay";
+};
+
+&usbmisc2 {
+ status = "okay";
};
&usdhc0 {
@@ -224,6 +282,32 @@ MX8ULP_PAD_PTE13__LPI2C7_SDA 0x20
>;
};
+ pinctrl_typec1: typec1grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF3__PTF3 0x3
+ >;
+ };
+
+ pinctrl_typec2: typec2grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF5__PTF5 0x3
+ >;
+ };
+
+ pinctrl_usb1: usb1grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF2__USB0_ID 0x10003
+ MX8ULP_PAD_PTF4__USB0_OC 0x10003
+ >;
+ };
+
+ pinctrl_usb2: usb2grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD23__USB1_ID 0x10003
+ MX8ULP_PAD_PTF6__USB1_OC 0x10003
+ >;
+ };
+
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
MX8ULP_PAD_PTD1__SDHC0_CMD 0x3
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-18 8:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-18 8:54 [PATCH v2 1/5] arm64: dts: imx8ulp: add usb nodes Xu Yang
2023-12-18 8:54 ` Xu Yang [this message]
2023-12-18 10:16 ` [PATCH v2 2/5] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes Fabio Estevam
2023-12-19 7:35 ` [EXT] " Xu Yang
2023-12-18 8:54 ` [PATCH v2 3/5] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93 Xu Yang
2023-12-19 7:47 ` Krzysztof Kozlowski
2023-12-20 2:23 ` [EXT] " Xu Yang
2023-12-20 7:24 ` Krzysztof Kozlowski
2023-12-21 13:13 ` Xu Yang
2023-12-18 8:54 ` [PATCH v2 4/5] arm64: dts: imx93: add usb nodes Xu Yang
2024-01-08 15:49 ` Alexander Stein
2024-01-12 10:37 ` [EXT] " Xu Yang
2023-12-18 8:54 ` [PATCH v2 5/5] arm64: dts: imx93-11x11-evk: enable usb and typec nodes Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231218085456.3962720-2-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox