public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Xu Yang <xu.yang_2@nxp.com>
To: gregkh@linuxfoundation.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com
Cc: linux-imx@nxp.com, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, jun.li@nxp.com,
	linux-usb@vger.kernel.org
Subject: [PATCH v2 4/5] arm64: dts: imx93: add usb nodes
Date: Mon, 18 Dec 2023 16:54:55 +0800	[thread overview]
Message-ID: <20231218085456.3962720-4-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20231218085456.3962720-1-xu.yang_2@nxp.com>

There are 2 USB controllers on i.MX93. Add them.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - fix format as suggested by Alexander
 - change compatible from fsl,imx8mm-usb to fsl,imx93-usb
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 58 ++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 34c0540276d1..043ec8dc9aca 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -171,6 +171,20 @@ cm33: remoteproc-cm33 {
 		status = "disabled";
 	};
 
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1059,5 +1073,49 @@ ddr-pmu@4e300dc0 {
 			reg = <0x4e300dc0 0x200>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		usbotg1: usb@4c100000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c100000 0x200>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root_clk", "usb_wakeup_clk";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			fsl,usbphy = <&usbphynop1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@4c100200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					"fsl,imx6q-usbmisc";
+			reg = <0x4c100200 0x200>;
+			#index-cells = <1>;
+		};
+
+		usbotg2: usb@4c200000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c200000 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root_clk", "usb_wakeup_clk";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			fsl,usbphy = <&usbphynop2>;
+			fsl,usbmisc = <&usbmisc2 0>;
+			status = "disabled";
+		};
+
+		usbmisc2: usbmisc@4c200200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					"fsl,imx6q-usbmisc";
+			reg = <0x4c200200 0x200>;
+			#index-cells = <1>;
+		};
 	};
 };
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-12-18  8:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-18  8:54 [PATCH v2 1/5] arm64: dts: imx8ulp: add usb nodes Xu Yang
2023-12-18  8:54 ` [PATCH v2 2/5] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes Xu Yang
2023-12-18 10:16   ` Fabio Estevam
2023-12-19  7:35     ` [EXT] " Xu Yang
2023-12-18  8:54 ` [PATCH v2 3/5] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93 Xu Yang
2023-12-19  7:47   ` Krzysztof Kozlowski
2023-12-20  2:23     ` [EXT] " Xu Yang
2023-12-20  7:24       ` Krzysztof Kozlowski
2023-12-21 13:13         ` Xu Yang
2023-12-18  8:54 ` Xu Yang [this message]
2024-01-08 15:49   ` [PATCH v2 4/5] arm64: dts: imx93: add usb nodes Alexander Stein
2024-01-12 10:37     ` [EXT] " Xu Yang
2023-12-18  8:54 ` [PATCH v2 5/5] arm64: dts: imx93-11x11-evk: enable usb and typec nodes Xu Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231218085456.3962720-4-xu.yang_2@nxp.com \
    --to=xu.yang_2@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox