[PATCH v3 0/4] arm64: dts: ti: k3-am62{a,p}x-sk: add opp frequencies

[PATCH v3 0/4] arm64: dts: ti: k3-am62{a,p}x-sk: add opp frequencies

[Bryan Brattlof]

Hello everyone

This series adds in the OPPs for the Cortex-A53s on the AM62Ax and 
AM62Px SoC families along with the defining the 
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID which we can use to to properly 
limit the OPPs available for that variant.

Happy reviewing
~Bryan

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
Changes in v3:
- Miscellaneous spelling fixes in commit body
- Link to v2: https://lore.kernel.org/r/20240823-opp-v2-0-e2f67b37c299@ti.com

Changes in v2:
- Expanded on commit descriptions
- Split board file and SoC fdt changes into different patches
- Link to v1: https://lore.kernel.org/r/20240809-opp-v1-0-fea8efeaf963@ti.com

---
Bryan Brattlof (4):
      arm64: dts: ti: k3-am62a: add opp frequencies
      arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry
      arm64: dts: ti: k3-am62p: add opp frequencies
      arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry

 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi        |  5 +++
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts            |  9 ++++
 arch/arm64/boot/dts/ti/k3-am62a7.dtsi              | 51 ++++++++++++++++++++++
 .../boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi  |  5 +++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts            |  9 ++++
 arch/arm64/boot/dts/ti/k3-am62p5.dtsi              | 47 ++++++++++++++++++++
 6 files changed, 126 insertions(+)
---
base-commit: 182a862560097dec7adf774af58076984cd6c1ed
change-id: 20240809-opp-7f1372af677c

Best regards,
-- 
Bryan Brattlof <bb@ti.com>

[PATCH v3 1/4] arm64: dts: ti: k3-am62a: add opp frequencies

[Bryan Brattlof]

One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)

The OPPs available for the Cortex-A53s on the AM62Ax can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
to only OPP entries the variant supports. A table of all these variants
can be found in it's data sheet[0] for the AM62Ax family.

Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi |  5 +++
 arch/arm64/boot/dts/ti/k3-am62a7.dtsi       | 51 +++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index f5ac101a04dfa..0b1dd5390cd3f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -17,6 +17,11 @@ chipid: chipid@14 {
 			reg = <0x14 0x4>;
 		};
 
+		opp_efuse_table: syscon@18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon@200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index f86a23404e6dd..6c99221beb6bd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -48,6 +48,8 @@ cpu0: cpu@0 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,6 +64,8 @@ cpu1: cpu@1 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -76,6 +80,8 @@ cpu2: cpu@2 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -90,6 +96,51 @@ cpu3: cpu@3 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&opp_efuse_table>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
 		};
 	};
 

-- 
2.46.0

[PATCH v3 2/4] arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry

[Bryan Brattlof]

The AM62Ax reference board is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
7.5 of the SoC's data sheet[0]. Append the 1.4Ghz entry to the OPP table
to enable this OPP

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 67faf46d7a35a..a6f0d87a50d8a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -68,6 +68,15 @@ wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
 		};
 	};
 
+	opp-table {
+		/* Requires VDD_CORE at 0v85 */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
 	vmain_pd: regulator-0 {
 		/* TPS25750 PD CONTROLLER OUTPUT */
 		compatible = "regulator-fixed";

-- 
2.46.0

[PATCH v3 3/4] arm64: dts: ti: k3-am62p: add opp frequencies

[Bryan Brattlof]

One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)

The OPPs available for the Cortex-A53s on the AM62Px can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
the OPP entries the SoC supports. A table of all these variants can be
found in its data sheet[0] for the AM62Px processor family.

Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.

[0] https://www.ti.com/lit/ds/symlink/am62p-q1.pdf

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
Changes from v2:
- Miscellaneous spelling fixes in commit body
- Link: https://lore.kernel.org/r/20240823-opp-v2-0-e2f67b37c299@ti.com
---
 .../boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi  |  5 +++
 arch/arm64/boot/dts/ti/k3-am62p5.dtsi              | 47 ++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 315d0092e7366..6f32135f00a55 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -20,6 +20,11 @@ chipid: chipid@14 {
 			bootph-all;
 		};
 
+		opp_efuse_table: syscon@18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon@200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
index 41f479dca4555..140587d02e88e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -47,6 +47,7 @@ cpu0: cpu@0 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 135 0>;
 		};
 
@@ -62,6 +63,7 @@ cpu1: cpu@1 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 136 0>;
 		};
 
@@ -77,6 +79,7 @@ cpu2: cpu@2 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 137 0>;
 		};
 
@@ -92,10 +95,54 @@ cpu3: cpu@3 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 138 0>;
 		};
 	};
 
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&opp_efuse_table>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
+		};
+	};
+
 	l2_0: l2-cache0 {
 		compatible = "cache";
 		cache-unified;

-- 
2.46.0

[PATCH v3 4/4] arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry

[Bryan Brattlof]

The AM62Px reference board is capable of supplying 0v85 to the VDD_CORE
which allows the Cortex-A53s to operate at 1.4GHz according to chapter
6.6 of the SoC's data sheet[0] . Append the 1.4Ghz entry to the OPP
table to enable this frequency

[0] https://www.ti.com/lit/ds/symlink/am62p-q1.pdf

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index ff65955551a32..ab5d7a5fc6118 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -128,6 +128,15 @@ led-0 {
 		};
 	};
 
+	opp-table {
+		/* Requires VDD_CORE at 0v85 */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
 	tlv320_mclk: clk-0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";

-- 
2.46.0

Re: [PATCH v3 1/4] arm64: dts: ti: k3-am62a: add opp frequencies

[Nishanth Menon]

On 12:22-20240826, Bryan Brattlof wrote:
> One power management technique available to the Cortex-A53s is their
> ability to dynamically scale their frequency across the device's
> Operating Performance Points (OPP)
> 
> The OPPs available for the Cortex-A53s on the AM62Ax can vary based on
> the silicon variant used. The SoC variant is encoded into the
> WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
> to only OPP entries the variant supports. A table of all these variants
> can be found in it's data sheet[0] for the AM62Ax family.
> 
> Add the OPP table into the SoC's fdti file along with the syscon node to
> describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
> the SoC variant.
> 
> [0] https://www.ti.com/lit/ds/symlink/am62a3.pdf
> 
> Signed-off-by: Bryan Brattlof <bb@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi |  5 +++
>  arch/arm64/boot/dts/ti/k3-am62a7.dtsi       | 51 +++++++++++++++++++++++++++++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
> index f5ac101a04dfa..0b1dd5390cd3f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
> @@ -17,6 +17,11 @@ chipid: chipid@14 {
>  			reg = <0x14 0x4>;
>  		};
>  
> +		opp_efuse_table: syscon@18 {
> +			compatible = "ti,am62-opp-efuse-table", "syscon";
> +			reg = <0x18 0x4>;

Does this really work??

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/cpufreq/ti-cpufreq.c#n309
	efuse_offset is 0x0 -> OK.. BUT,
	.rev_offset = 0x0014 from a syscon which is one register wide???

Seems like you have been sidetracked by:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/cpufreq/ti-cpufreq.c#n384
bug to read some omap register offset?

This is probably not getting exposed due to the syscon bug that I just
fixed: https://lore.kernel.org/r/20240828121008.3066002-1-nm@ti.com

I just have to NAK this series while you folks figure out how to do this
properly.

> +		};
> +
>  		cpsw_mac_syscon: ethernet-mac-syscon@200 {
>  			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
>  			reg = <0x200 0x8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
> index f86a23404e6dd..6c99221beb6bd 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
> @@ -48,6 +48,8 @@ cpu0: cpu@0 {
>  			d-cache-line-size = <64>;
>  			d-cache-sets = <128>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&a53_opp_table>;
> +			clocks = <&k3_clks 135 0>;
>  		};
>  
>  		cpu1: cpu@1 {
> @@ -62,6 +64,8 @@ cpu1: cpu@1 {
>  			d-cache-line-size = <64>;
>  			d-cache-sets = <128>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&a53_opp_table>;
> +			clocks = <&k3_clks 136 0>;
>  		};
>  
>  		cpu2: cpu@2 {
> @@ -76,6 +80,8 @@ cpu2: cpu@2 {
>  			d-cache-line-size = <64>;
>  			d-cache-sets = <128>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&a53_opp_table>;
> +			clocks = <&k3_clks 137 0>;
>  		};
>  
>  		cpu3: cpu@3 {
> @@ -90,6 +96,51 @@ cpu3: cpu@3 {
>  			d-cache-line-size = <64>;
>  			d-cache-sets = <128>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&a53_opp_table>;
> +			clocks = <&k3_clks 138 0>;
> +		};
> +	};
> +
> +	a53_opp_table: opp-table {
> +		compatible = "operating-points-v2-ti-cpu";
> +		opp-shared;
> +		syscon = <&opp_efuse_table>;
> +
> +		opp-200000000 {
> +			opp-hz = /bits/ 64 <200000000>;
> +			opp-supported-hw = <0x01 0x0007>;
> +			clock-latency-ns = <6000000>;
> +		};
> +
> +		opp-400000000 {
> +			opp-hz = /bits/ 64 <400000000>;
> +			opp-supported-hw = <0x01 0x0007>;
> +			clock-latency-ns = <6000000>;
> +		};
> +
> +		opp-600000000 {
> +			opp-hz = /bits/ 64 <600000000>;
> +			opp-supported-hw = <0x01 0x0007>;
> +			clock-latency-ns = <6000000>;
> +		};
> +
> +		opp-800000000 {
> +			opp-hz = /bits/ 64 <800000000>;
> +			opp-supported-hw = <0x01 0x0007>;
> +			clock-latency-ns = <6000000>;
> +		};
> +
> +		opp-1000000000 {
> +			opp-hz = /bits/ 64 <1000000000>;
> +			opp-supported-hw = <0x01 0x0006>;
> +			clock-latency-ns = <6000000>;
> +		};
> +
> +		opp-1250000000 {
> +			opp-hz = /bits/ 64 <1250000000>;
> +			opp-supported-hw = <0x01 0x0004>;
> +			clock-latency-ns = <6000000>;
> +			opp-suspend;
>  		};
>  	};
>  
> 
> -- 
> 2.46.0
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D