From: Beleswar Padhi <b-padhi@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <afd@ti.com>, <u-kumar1@ti.com>, <hnagalla@ti.com>, <jm@ti.com>,
<b-padhi@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 09/33] arm64: dts: ti: k3-am65: Enable remote processors at board level
Date: Fri, 5 Sep 2025 10:48:22 +0530 [thread overview]
Message-ID: <20250905051846.1189612-10-b-padhi@ti.com> (raw)
In-Reply-To: <20250905051846.1189612-1-b-padhi@ti.com>
Remote Processors defined in top-level AM65x SoC dtsi files are
incomplete without the memory carveouts and mailbox assignments which
are only known at board integration level.
Therefore, disable the remote processors at SoC level and enable them at
board level where above information is available.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
---
v3: Changelog:
1. Carried A/B tag.
Link to v2:
https://lore.kernel.org/all/20250823160901.2177841-10-b-padhi@ti.com/
v2: Changelog:
1. Re-ordered patch from [PATCH 31/33] to [PATCH v2 09/33].
Link to v1:
https://lore.kernel.org/all/20250814223839.3256046-32-b-padhi@ti.com/
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 6 ++++++
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 6 ++++++
3 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index e5136ed94765..73936994a156 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -602,16 +602,22 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
};
};
+&mcu_r5fss0 {
+ status = "okay";
+};
+
&mcu_r5fss0_core0 {
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ status = "okay";
};
&mcu_r5fss0_core1 {
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+ status = "okay";
};
&mcu_rti1 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 7cf1f646500a..f6d9a5779918 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -408,6 +408,7 @@ mcu_r5fss0: r5fss@41000000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,am654-r5f";
@@ -422,6 +423,7 @@ mcu_r5fss0_core0: r5f@41000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@41400000 {
@@ -437,6 +439,7 @@ mcu_r5fss0_core1: r5f@41400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index e589690c7c82..39c2d46801de 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -541,16 +541,22 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
};
};
+&mcu_r5fss0 {
+ status = "okay";
+};
+
&mcu_r5fss0_core0 {
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ status = "okay";
};
&mcu_r5fss0_core1 {
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+ status = "okay";
};
&ospi0 {
--
2.34.1
next prev parent reply other threads:[~2025-09-05 5:59 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 5:18 [PATCH v3 00/33] Refactor TI IPC DT configs into dtsi Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 01/33] arm64: dts: ti: k3-j7200: Enable R5F remote processors at board level Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 02/33] arm64: dts: ti: k3-j721e: Enable " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 03/33] arm64: dts: ti: k3-j721s2: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 04/33] arm64: dts: ti: k3-j784s4-j742s2: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 05/33] arm64: dts: ti: k3-am62p-j722s: " Beleswar Padhi
2025-09-05 19:09 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 06/33] arm64: dts: ti: k3-am62: " Beleswar Padhi
2025-09-05 19:11 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 07/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 08/33] arm64: dts: ti: k3-am64: " Beleswar Padhi
2025-09-05 5:18 ` Beleswar Padhi [this message]
2025-09-05 5:18 ` [PATCH v3 10/33] arm64: dts: ti: k3-am62: Enable Mailbox nodes at the " Beleswar Padhi
2025-09-05 19:13 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 11/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 12/33] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 13/33] arm64: dts: ti: k3-j721e-beagleboneai64: Add missing cfg for TI IPC FW Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 14/33] arm64: dts: ti: k3-am62p-verdin: Add missing cfg for TI IPC Firmware Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 15/33] arm64: dts: ti: k3-am62-verdin: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 16/33] arm64: dts: ti: k3-am62-pocketbeagle2: " Beleswar Padhi
2025-09-08 11:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 17/33] arm64: dts: ti: k3-am642-sr-som: " Beleswar Padhi
2025-09-05 6:34 ` Francesco Dolcini
2025-09-05 5:18 ` [PATCH v3 18/33] arm64: dts: ti: k3-am64-phycore-som: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 19/33] arm64: dts: ti: k3-am642-tqma64xxl: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 20/33] Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations" Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 21/33] Revert "arm64: dts: ti: k3-j721e-beagleboneai64: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 22/33] arm64: dts: ti: k3-j721e-beagleboneai64: Switch MAIN R5F clusters to Split-mode Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 23/33] arm64: dts: ti: k3-j7200-ti-ipc-firmware: Refactor IPC cfg into new dtsi Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 24/33] arm64: dts: ti: k3-j721e-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 25/33] arm64: dts: ti: k3-j721s2-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 26/33] arm64: dts: ti: k3-j784s4-j742s2-ti-ipc-firmware-common: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 27/33] arm64: dts: ti: k3-j784s4-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 28/33] arm64: dts: ti: k3-j722s-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 29/33] arm64: dts: ti: k3-am62p-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:45 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 30/33] arm64: dts: ti: k3-am62-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:37 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 31/33] arm64: dts: ti: k3-am62a-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 32/33] arm64: dts: ti: k3-am64-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 33/33] arm64: dts: ti: k3-am65-ti-ipc-firmware: " Beleswar Padhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905051846.1189612-10-b-padhi@ti.com \
--to=b-padhi@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=jm@ti.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox