From: Beleswar Padhi <b-padhi@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <afd@ti.com>, <u-kumar1@ti.com>, <hnagalla@ti.com>, <jm@ti.com>,
<b-padhi@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 21/33] Revert "arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations"
Date: Fri, 5 Sep 2025 10:48:34 +0530 [thread overview]
Message-ID: <20250905051846.1189612-22-b-padhi@ti.com> (raw)
In-Reply-To: <20250905051846.1189612-1-b-padhi@ti.com>
This reverts commit 1a314099b7559690fe23cdf3300dfff6e830ecb1.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP
cores is 16MB, so the DMA memory regions are chosen such that
they are in separate 16MB regions for each DSP, while reserving
a total of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 1a314099b755 ("arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
v3: Changelog:
1. None
Link to v2:
https://lore.kernel.org/all/20250823160901.2177841-22-b-padhi@ti.com/
v2: Changelog:
1. Re-ordered patch from [PATCH 04/33] to [PATCH v2 21/33].
Link to v1:
https://lore.kernel.org/all/20250814223839.3256046-5-b-padhi@ti.com/
arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 2ff4cdf1300f..f82966072605 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -123,7 +123,8 @@ main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
no-map;
};
- c66_0_dma_memory_region: c66-dma-memory@a6000000 {
+ /* Carveout locations are flipped due to caching */
+ c66_1_dma_memory_region: c66-dma-memory@a6000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6000000 0x00 0x100000>;
no-map;
@@ -135,7 +136,8 @@ c66_0_memory_region: c66-memory@a6100000 {
no-map;
};
- c66_1_dma_memory_region: c66-dma-memory@a7000000 {
+ /* Carveout locations are flipped due to caching */
+ c66_0_dma_memory_region: c66-dma-memory@a7000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7000000 0x00 0x100000>;
no-map;
--
2.34.1
next prev parent reply other threads:[~2025-09-05 6:32 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 5:18 [PATCH v3 00/33] Refactor TI IPC DT configs into dtsi Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 01/33] arm64: dts: ti: k3-j7200: Enable R5F remote processors at board level Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 02/33] arm64: dts: ti: k3-j721e: Enable " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 03/33] arm64: dts: ti: k3-j721s2: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 04/33] arm64: dts: ti: k3-j784s4-j742s2: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 05/33] arm64: dts: ti: k3-am62p-j722s: " Beleswar Padhi
2025-09-05 19:09 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 06/33] arm64: dts: ti: k3-am62: " Beleswar Padhi
2025-09-05 19:11 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 07/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 08/33] arm64: dts: ti: k3-am64: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 09/33] arm64: dts: ti: k3-am65: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 10/33] arm64: dts: ti: k3-am62: Enable Mailbox nodes at the " Beleswar Padhi
2025-09-05 19:13 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 11/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 12/33] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 13/33] arm64: dts: ti: k3-j721e-beagleboneai64: Add missing cfg for TI IPC FW Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 14/33] arm64: dts: ti: k3-am62p-verdin: Add missing cfg for TI IPC Firmware Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 15/33] arm64: dts: ti: k3-am62-verdin: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 16/33] arm64: dts: ti: k3-am62-pocketbeagle2: " Beleswar Padhi
2025-09-08 11:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 17/33] arm64: dts: ti: k3-am642-sr-som: " Beleswar Padhi
2025-09-05 6:34 ` Francesco Dolcini
2025-09-05 5:18 ` [PATCH v3 18/33] arm64: dts: ti: k3-am64-phycore-som: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 19/33] arm64: dts: ti: k3-am642-tqma64xxl: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 20/33] Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations" Beleswar Padhi
2025-09-05 5:18 ` Beleswar Padhi [this message]
2025-09-05 5:18 ` [PATCH v3 22/33] arm64: dts: ti: k3-j721e-beagleboneai64: Switch MAIN R5F clusters to Split-mode Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 23/33] arm64: dts: ti: k3-j7200-ti-ipc-firmware: Refactor IPC cfg into new dtsi Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 24/33] arm64: dts: ti: k3-j721e-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 25/33] arm64: dts: ti: k3-j721s2-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 26/33] arm64: dts: ti: k3-j784s4-j742s2-ti-ipc-firmware-common: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 27/33] arm64: dts: ti: k3-j784s4-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 28/33] arm64: dts: ti: k3-j722s-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 29/33] arm64: dts: ti: k3-am62p-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:45 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 30/33] arm64: dts: ti: k3-am62-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:37 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 31/33] arm64: dts: ti: k3-am62a-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 32/33] arm64: dts: ti: k3-am64-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 33/33] arm64: dts: ti: k3-am65-ti-ipc-firmware: " Beleswar Padhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905051846.1189612-22-b-padhi@ti.com \
--to=b-padhi@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=jm@ti.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox