From: Beleswar Padhi <b-padhi@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <afd@ti.com>, <u-kumar1@ti.com>, <hnagalla@ti.com>, <jm@ti.com>,
<b-padhi@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 11/33] arm64: dts: ti: k3-am62a: Enable Mailbox nodes at the board level
Date: Fri, 5 Sep 2025 10:48:24 +0530 [thread overview]
Message-ID: <20250905051846.1189612-12-b-padhi@ti.com> (raw)
In-Reply-To: <20250905051846.1189612-1-b-padhi@ti.com>
Mailbox nodes defined in the top-level AM62A SoC dtsi files are
incomplete and may not be functional unless they are extended with a
chosen interrupt and connection to a remote processor.
As the remote processors depend on memory nodes which are only known at
the board integration level, these nodes should only be enabled when
provided with the above information.
Disable the Mailbox nodes in the dtsi files and only enable the ones
that are actually used on a given board.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
---
v3: Changelog:
1. Carried A/B, T/B tag.
Link to v2:
https://lore.kernel.org/all/20250823160901.2177841-12-b-padhi@ti.com/
v2: Changelog:
1. Re-ordered patch from [PATCH 23/33] to [PATCH v2 11/33].
Link to v1:
https://lore.kernel.org/all/20250814223839.3256046-24-b-padhi@ti.com/
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 9cad79d7bbc1..d5f018768981 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -804,6 +804,7 @@ mailbox0_cluster0: mailbox@29000000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster1: mailbox@29010000 {
@@ -813,6 +814,7 @@ mailbox0_cluster1: mailbox@29010000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster2: mailbox@29020000 {
@@ -822,6 +824,7 @@ mailbox0_cluster2: mailbox@29020000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster3: mailbox@29030000 {
@@ -831,6 +834,7 @@ mailbox0_cluster3: mailbox@29030000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
main_mcan0: can@20701000 {
--
2.34.1
next prev parent reply other threads:[~2025-09-05 6:04 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 5:18 [PATCH v3 00/33] Refactor TI IPC DT configs into dtsi Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 01/33] arm64: dts: ti: k3-j7200: Enable R5F remote processors at board level Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 02/33] arm64: dts: ti: k3-j721e: Enable " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 03/33] arm64: dts: ti: k3-j721s2: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 04/33] arm64: dts: ti: k3-j784s4-j742s2: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 05/33] arm64: dts: ti: k3-am62p-j722s: " Beleswar Padhi
2025-09-05 19:09 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 06/33] arm64: dts: ti: k3-am62: " Beleswar Padhi
2025-09-05 19:11 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 07/33] arm64: dts: ti: k3-am62a: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 08/33] arm64: dts: ti: k3-am64: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 09/33] arm64: dts: ti: k3-am65: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 10/33] arm64: dts: ti: k3-am62: Enable Mailbox nodes at the " Beleswar Padhi
2025-09-05 19:13 ` Dhruva Gole
2025-09-05 5:18 ` Beleswar Padhi [this message]
2025-09-05 5:18 ` [PATCH v3 12/33] arm64: dts: ti: k3-am6*-boards: Add label to reserved-memory node Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 13/33] arm64: dts: ti: k3-j721e-beagleboneai64: Add missing cfg for TI IPC FW Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 14/33] arm64: dts: ti: k3-am62p-verdin: Add missing cfg for TI IPC Firmware Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 15/33] arm64: dts: ti: k3-am62-verdin: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 16/33] arm64: dts: ti: k3-am62-pocketbeagle2: " Beleswar Padhi
2025-09-08 11:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 17/33] arm64: dts: ti: k3-am642-sr-som: " Beleswar Padhi
2025-09-05 6:34 ` Francesco Dolcini
2025-09-05 5:18 ` [PATCH v3 18/33] arm64: dts: ti: k3-am64-phycore-som: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 19/33] arm64: dts: ti: k3-am642-tqma64xxl: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 20/33] Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations" Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 21/33] Revert "arm64: dts: ti: k3-j721e-beagleboneai64: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 22/33] arm64: dts: ti: k3-j721e-beagleboneai64: Switch MAIN R5F clusters to Split-mode Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 23/33] arm64: dts: ti: k3-j7200-ti-ipc-firmware: Refactor IPC cfg into new dtsi Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 24/33] arm64: dts: ti: k3-j721e-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 25/33] arm64: dts: ti: k3-j721s2-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 26/33] arm64: dts: ti: k3-j784s4-j742s2-ti-ipc-firmware-common: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 27/33] arm64: dts: ti: k3-j784s4-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 28/33] arm64: dts: ti: k3-j722s-ti-ipc-firmware: " Beleswar Padhi
2025-09-05 5:18 ` [PATCH v3 29/33] arm64: dts: ti: k3-am62p-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:45 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 30/33] arm64: dts: ti: k3-am62-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:37 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 31/33] arm64: dts: ti: k3-am62a-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 32/33] arm64: dts: ti: k3-am64-ti-ipc-firmware: " Beleswar Padhi
2025-09-08 9:46 ` Dhruva Gole
2025-09-05 5:18 ` [PATCH v3 33/33] arm64: dts: ti: k3-am65-ti-ipc-firmware: " Beleswar Padhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905051846.1189612-12-b-padhi@ti.com \
--to=b-padhi@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=jm@ti.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox