From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Tomasz Merta <tomasz.merta@arrow.com>,
Tomasz Merta <tommerta@gmail.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
olivier.moysan@foss.st.com, arnaud.pouliquen@foss.st.com,
lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
mcoquelin.stm32@gmail.com, alexandre.torgue@foss.st.com,
linux-sound@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH AUTOSEL 6.18] ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J
Date: Mon, 20 Apr 2026 09:19:53 -0400 [thread overview]
Message-ID: <20260420132314.1023554-199-sashal@kernel.org> (raw)
In-Reply-To: <20260420132314.1023554-1-sashal@kernel.org>
From: Tomasz Merta <tomasz.merta@arrow.com>
[ Upstream commit 0669631dbccd41cf3ca7aa70213fcd8bb41c4b38 ]
The STM32 SAI driver do not set the clock strobing bit (CKSTR) for DSP_A,
DSP_B and LEFT_J formats, causing data to be sampled on the wrong BCLK
edge when SND_SOC_DAIFMT_NB_NF is used.
Per ALSA convention, NB_NF requires sampling on the rising BCLK edge.
The STM32MP25 SAI reference manual states that CKSTR=1 is required for
signals received by the SAI to be sampled on the SCK rising edge.
Without setting CKSTR=1, the SAI samples on the falling edge, violating
the NB_NF convention. For comparison, the NXP FSL SAI driver correctly
sets FSL_SAI_CR2_BCP for DSP_A, DSP_B and LEFT_J, consistent with its
I2S handling.
This patch adds SAI_XCR1_CKSTR for DSP_A, DSP_B and LEFT_J in
stm32_sai_set_dai_fmt which was verified empirically with a cs47l35 codec.
RIGHT_J (LSB) is not investigated and addressed by this patch.
Note: the STM32 I2S driver (stm32_i2s_set_dai_fmt) may have the same issue
for DSP_A mode, as I2S_CGFR_CKPOL is not set. This has not been verified
and is left for a separate investigation.
Signed-off-by: Tomasz Merta <tommerta@gmail.com>
Link: https://patch.msgid.link/20260408084056.20588-1-tommerta@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
LLM Generated explanations, may be completely bogus:
Error: Failed to generate final synthesis
sound/soc/stm/stm32_sai_sub.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 5ae4d2577f28b..c2540383ab86f 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -802,6 +802,7 @@ static int stm32_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
break;
/* Left justified */
case SND_SOC_DAIFMT_MSB:
+ cr1 |= SAI_XCR1_CKSTR;
frcr |= SAI_XFRCR_FSPOL | SAI_XFRCR_FSDEF;
break;
/* Right justified */
@@ -809,9 +810,11 @@ static int stm32_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
frcr |= SAI_XFRCR_FSPOL | SAI_XFRCR_FSDEF;
break;
case SND_SOC_DAIFMT_DSP_A:
+ cr1 |= SAI_XCR1_CKSTR;
frcr |= SAI_XFRCR_FSPOL | SAI_XFRCR_FSOFF;
break;
case SND_SOC_DAIFMT_DSP_B:
+ cr1 |= SAI_XCR1_CKSTR;
frcr |= SAI_XFRCR_FSPOL;
break;
default:
--
2.53.0
next prev parent reply other threads:[~2026-04-20 13:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260420132314.1023554-1-sashal@kernel.org>
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-5.10] clk: spear: fix resource leak in clk_register_vco_pll() Sasha Levin
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-5.10] ARM: xen: validate hypervisor compatible before parsing its version Sasha Levin
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-6.19] wifi: mt76: avoid to set ACK for MCU command if wait_resp is not set Sasha Levin
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-6.18] phy: phy-mtk-tphy: Update names and format of kernel-doc comments Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 6.18] ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.18] drm/imx: parallel-display: add DRM_DISPLAY_HELPER for DRM_IMX_PARALLEL_DISPLAY Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.1] ASoC: mxs-sgtl5000: disable MCLK on error paths of mxs_sgtl5000_probe() Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.12] Bluetooth: btmtk: add MT7902 MCU support Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: flush pending TX before channel switch Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.6] wifi: mt76: fix list corruption in mt76_wcid_cleanup Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.12] wifi: mt76: add missing lock protection in mt76_sta_state for sta_event callback Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.1] Bluetooth: btmtk: improve mt79xx firmware setup retry flow Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: mt7996: Disable Rx hdr_trans in monitor mode Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.12] drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.12] wifi: mt76: mt7925: Skip scan process during suspend Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-5.10] wifi: mt76: mt76x02: wake queues after reconfig Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.12] wifi: mt76: mt7925: resolve link after acquiring mt76 mutex Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: mt7996: fix queue pause after scan due to wrong channel switch reason Sasha Levin
2026-04-20 13:19 ` Sasha Levin [this message]
2026-04-20 13:20 ` [PATCH AUTOSEL 7.0-6.12] net: ethernet: mtk_eth_soc: avoid writing to ESW registers on MT7628 Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 6.18] media: rkvdec: reduce stack usage in rkvdec_init_v4l2_vp9_count_tbl() Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 6.18] soc: aspeed: socinfo: Mask table entries for accurate SoC ID matching Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 6.18] arm64: dts: imx93-9x9-qsb: change usdhc tuning step for eMMC and SD Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 7.0-6.6] wifi: mt76: mt7996: reset device after MCU message timeout Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 7.0] spi: stm32: fix rx DMA request error handling Sasha Levin
2026-04-20 13:21 ` [PATCH AUTOSEL 7.0-5.10] drm/mediatek: mtk_dsi: enable hs clock during pre-enable Sasha Levin
2026-04-20 13:21 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: mt7996: fix frequency separation for station STR mode Sasha Levin
2026-04-20 13:21 ` [PATCH AUTOSEL 6.18] arm64: dts: imx8mq: Set the correct gpu_ahb clock frequency Sasha Levin
2026-04-20 13:22 ` [PATCH AUTOSEL 6.18] net: airoha: Fix memory leak in airoha_qdma_rx_process() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260420132314.1023554-199-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=arnaud.pouliquen@foss.st.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@foss.st.com \
--cc=patches@lists.linux.dev \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tomasz.merta@arrow.com \
--cc=tommerta@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox